Epson Stylus Photo R1900

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Make sure your paper meets the specifications for your product. If paper dust builds up on the rollers, they may lose traction and become unable to feed paper properly. Clean the paper guide. If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary.
In many applications, you can select Print directly from the File menu, then access the printer software by clicking the Properties button. Click the Paper tab, select Roll Paper for Paper Source, and select the appropriate page size.
Try removing the paper tray, re-aligning the paper, and sliding it back in. In other instances, there may be some paper jammed in the mechanism. Usually your printer will tell you so, and you just need to open the access panel and pull the crumpled paper out.
A. The standard Epson TM-T88 receipt printer paper size is 3 1/8″ x 230`. Buy 3 1/8″ x 230` Thermal Receipt Paper (50 Rolls) here. Our 3 ⅛” x 230` thermal paper rolls are high-quality, BPA-free, and available for Free, Same-Day Shipping!
From 64 to 90 g/m2, plain paper (including third party papers). Over 90 g/m2, genuine Epson media – supported paper types.
Shut down the computer, then press the paper button to eject the jammed paper. If the error does not clear, open the printer cover and remove all of the paper inside, including any torn pieces. Then, reload the paper in the sheet feeder and press paper button to resume printing.
Printing on roll paper

Once you have prepared your roll paper and loaded it into the printer, you must make the printer driver settings before you can print. One of the first things you should decide is what width of roll paper you will be using. This will determine what Paper Source setting you will need to make.

Dust, paper fiber, and other debris might accumulate on the pick rollers and cause paper feed issues. To help prevent paper feed issues, clean the rollers inside the printer and in the duplexer (if equipped). If the other steps in this document fail to resolve the issue, then reset the printer.
Common Roll Widths

The most common widths for plotter printer paper are 11, 17, 18, 22, 24, 30, 34, 36, and 42 inches.

Standard Paper Capacity

For thick paper or card stock (0.61 to 1.3 mm), you can load one sheet in the following sizes: Legal (8.5 × 14 inches [216 × 356 mm]) Letter (8.5 × 11 inches [216 × 279 mm])

If you are printing on paper over 200gsm, it is advisable that you use the bypass tray rather than a paper tray, as it passes the sheet on the straightest route through the printer, which will reduce the risk of paper jams, as the thick paper is less flexible than thin paper.
80 gsm is ideal for forms, letters and handouts. Standard home/office printing paper thickness. 90 gsm is widely used as office paper. 90gsm is our lowest white paper thickness, commonly used for black and white printing.
EPSON recommends using plain photocopy or bond papers for your everyday printing. For digital photos that look and feel like traditional photos, choose one of the EPSON Premium Photo papers.
As a rule of thumb, to achieve photo quality print, you will need to use an image resolution of 300 pixels per inch. We write this as 300 DPI and means that in each inch of your print there will be 300 pixels.
EPSON recommends using plain photocopy or bond papers for your everyday printing. For digital photos that look and feel like traditional photos, choose one of the EPSON Premium Photo papers.
Make sure the paper size selected in the printer software matches the paper size selected on the printer`s control panel. To verify the paper size on the printer`s control panel press, Home if necessary, then select Setup > Paper Setup. If this does not resolve the issue, contact Epson.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :

Epson Stylus Photo R1900

Paper feeds straight through without printing on an Epson R2400
ANSWER : I was able to get it to print the internal test page by holding down the sheet paper feed button while turning the machine on — then continuing to hold the sheet paper feed button. It took several attempts, feeding a page straight through, but eventually it caught the sheet and printed. So it may be a timing issue as others have mentioned. It could still mean that the feed rollers are worn out. The back side of the large D-shaped feed roller has visible abrasion on it. The abrasion is difficult to see as the roller does not stay with the flat side exposed.

Read Full Q/A … :

Epson Stylus Photo R1900

Epson PX810FW printing issues, smudging.
ANSWER : Brisbane rubbish collection services have over the years made a significant contribution in keeping the city clean.

Read Full Q/A … :

Epson Stylus Photo R1900

Epson TM-U220 no test printing, troubleshoot nada
ANSWER : My TM U220 also not printing, it appears that windows do not recognise it. The internal test sugested above does not work either. Any suggestion would be welcome.

Read Full Q/A … :

Epson Stylus Photo R1900

Error Message "Paper out" when paper loaded
ANSWER : Check your paper tray settings as printer may be looking for paper from the manual feed tray on top of printer.

Read Full Q/A … :

Epson Stylus Photo R1900

paper drive wont accept paper
ANSWER : There is probably a small scrap of paper stuck at the left edge of the paper path. The paper hits it and skews to the left. The smaller size bypasses it. You need to shove something stiff, like a piece of file folder, down the paper path and attempt to dislodge it.

Read Full Q/A … :

Epson Stylus Photo R1900

Epson XP600 Paper Jam
ANSWER : hi Russ .did u find solution for ur problem?? i have the same problem ,how did u fix ur printer ..will be glad if u write me on email [email protected]

Read Full Q/A … :

Epson Stylus Photo R1900

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Epson Stylus Photo R1900