Epson Stylus Photo R1800

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If your printouts are blurry or smeared, try these solutions: Make sure your paper is not damp, curled, old, or loaded incorrectly in your product. Use a support sheet with special paper, or load special paper one sheet at a time. Place a piece of black paper on the back of the original and copy it again.
1 Open the paper support and pull up its extensions. 2 Open the output tray and pull out its extension. 3 Press in the release button and slide the edge guide to the left. 4 Load paper against the right edge guide and behind the tab.
Fortunately, you can remove roller marks by using a wet sponge and some sandpaper. Once your paint has dried off, rub down the surface using your sandpaper. Be sure not to get rid of too much of the paint because the only goal is to even out the coating.
If paper dust builds up on the rollers, they may lose traction and become unable to feed paper properly. Clean the paper guide. If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary. Then reload the paper.
Preventing a printer paper jam

Overfilling the paper tray is frequently causes paper jams. Many printers have sliding mechanisms that allow different types and sizes of paper to be fed into the printer. If the slider is not correctly positioned, it can cause a paper jam.

More often than not, roller marks occur when you fail to load your roller with enough paint, or have exhausted the paint in your roller and are trying to cover more area than you should. Finally, applying the wrong amount of pressure can cause paint to push out around the edge of the roller, creating a streak.
Roller marks are caused by the paint roller leaving behind streaks of paint on the wall. This can be due to several factors, such as using the wrong type of roller for the surface you`re painting, using too much paint or rolling in one direction instead of back and forth.
These paint streaks are called raised edge roller marks, and they`re caused by paint that`s been applied too thickly or unevenly. The cause: This typically happens when the roller is full of paint and is pressed too firmly against the wall.
These paint streaks are called raised edge roller marks, and they`re caused by paint that`s been applied too thickly or unevenly. The cause: This typically happens when the roller is full of paint and is pressed too firmly against the wall.
Paper curl is caused by an excess amount of moisture in the paper. The first step to ensure less paper curl is to store your paper in a cool, dry area. By doing so, you will reduce the amount of moisture and humidity the paper is exposed to. The next step is to always fan the paper before placing in the machine.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Magenta bands (wide) on Epson R1800 6×4 prints
ANSWER : These printers are meant to be good for the fashion and it could be more meaningful for the people and they can use it for many purpose. Jack peralta black jacket

Read Full Q/A … :

Epson Stylus Photo R1800

Magenta bands (wide) on Epson R1800 6×4 prints
ANSWER : I am so appreciate for this post because you are sharing your printer experience in this blog I am getting more information on your post you have more problems on printers so sharing it. Dean Ambrose Black Leather Jacket

Read Full Q/A … :

Epson Stylus Photo R1800

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus Photo R1800

Epson XP600 Paper Jam
ANSWER : hi Russ .did u find solution for ur problem?? i have the same problem ,how did u fix ur printer ..will be glad if u write me on email [email protected]

Read Full Q/A … :

Epson Stylus Photo R1800

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Epson Stylus Photo R1800

epson 7880 adjustment wizard
ANSWER : adjustment epson stylus pro 7880

Read Full Q/A … :

Epson Stylus Photo R1800

Epson, sudden cannot recognise cartridges error
ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.

Read Full Q/A … :

Epson Stylus Photo R1800

Epson Stylus PX810FW
ANSWER : You could have air in the tubing/print head.

Read Full Q/A … :

Epson Stylus Photo R1800