Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Shut the printer off, get a flashlight, and try to see inside. Make sure no label fragments have jammed up your printer before proceeding. You might need to check underneath the printer and shake it out to dislodge any loose paper or other debris that may have gotten stuck inside.
your pickup roller is dirty and the printer can`t grab a piece of paper. it will say paper jam when it does this. get a drop of dishsoap and clean the pickup roller of your printer with this. scrape at it with your fingernail to get the roller clean and wipe it off with a damp washcloth.
If the paper is even slightly askew, the rollers will pick it up a little crooked, and — guess what — the crooked sheet will immediately get jammed. So even though there`s no paper stuck when you start printing, the loose paper guides are ensuring that a sheet gets jammed whenever the printer starts doing its thing.
A piece of paper stuck in the paper tray or inside the printer can create a paper jam. Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer.
Open the Applications folder, open the EPSON Printer Utility3, select your Epson printer, and click OK. Then select Head Cleaning. 3. Follow the on-screen instructions to start the cleaning cycle, which lasts around 1 minute.
Step one: Perform a power reset

Unplug the power cord from the wall outlet. Wait at least 15 seconds. Plug the power cord back into the wall outlet. Reconnect the power cord to the rear of the product.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

What fluid to clean epson head?
ANSWER : There’s only 1 left, so better hurry. http://www.rjettek.com/jiecr-ocp-rinse-epson-blue/

Read Full Q/A … :
Unknown Printer

Print Head Jamming during allignment
ANSWER : It could be the home position sensor or a dry carriage guide shaft. I would clean and oil the carriage guide shaft first. Use a good quality oil. NOT WD-40 3 in 1 or something like that.

Read Full Q/A … :
Unknown Printer

Paper Jam and carriage jam code when nothing is jammed
ANSWER : Did you try cleaning the encoder strip that runs through the cartridge assy.? Use Window Cleaner on a paper towel. Also, check inside on the right. I’ve seen a lot of times where there is a folded up scrap of paper that stops the carriage from going all the way to the right.

Read Full Q/A … :
Unknown Printer

Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.

Read Full Q/A … :
Unknown Printer

Epson Stylus Photo T60 paper jam
ANSWER : paper jam

Read Full Q/A … :
Unknown Printer

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :
Unknown Printer

Epson XP600 Paper Jam
ANSWER : hi Russ .did u find solution for ur problem?? i have the same problem ,how did u fix ur printer ..will be glad if u write me on email [email protected]

Read Full Q/A … :
Unknown Printer

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :
Unknown Printer