Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

You could try using the WPS button but I would suggest that it is best to enter the wireless password manually. If it still does not connect you could try and turn off the 5Ghz on the Smart hub so that you can connect to the 2.4Ghz signal and once connected you can turn the 5Ghz back on.
Reasons for Epson printer will not print from computer

Not properly connected to the electrical supply. Not set as a default printer. Low ink levels. Jammed paper.

Make sure the cartridge chip is clean, free of ink smear and debris. Verify that the cartridge is seated in the printer securely. Push it down hard until you hear a click.
Try connecting the product to your router, access point, switch, or hub with another Ethernet cable. Try printing from another computer on the network to see if the problem persists. If network communication was interrupted while starting Epson Scan, exit Epson Scan, and restart it after a few seconds.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
Epson Printer Errors

If your printer is displaying an error code or message on the control panel, search for `Error code` on your product`s FAQs tab.

The ink cartridges may not have been installed using the correct procedure, or they may not be seated correctly. Follow the instructions below to correctly install and reseat the ink cartridges. Note: This product is designed to use only genuine Epson-brand ink cartridges.
Remove all of the new cartridges you had installed and re-install the old (empty) cartridges that worked. Restart the printer, this should remove the not recognised error (and tell you some are empty).
Turn off the ink monitor by checking off the “Disable Epson Status Monitor” found within a box. And lastly, click “Save” and close the window. That`s about it the printer and the cloned ink cartridges can now start printing operation.
Remove all of the new cartridges you had installed and re-install the old (empty) cartridges that worked. Restart the printer, this should remove the not recognised error (and tell you some are empty).
If your printer is not detecting the cartridges, there might be the following possible reasons: The cartridge chip is dirty or damaged. They are not compatible with your printer. They are not installed properly.
Ensure that the supported settings are applied in the printer driver and click Print in Black to continue printing using Black Print Mode or Cancel Print to replace the expended cartridge.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :
Unknown Printer

Epson Printer not printing
ANSWER : My EPSON printer was also not printing anything, I tried a lot to fix that but unable to fix. At last I got this link http://www.printer-techsupport.com/Epson-printer-support.html I just visited and made a call on their toll free. I got instant help from a certified technician to fix my printer.

Read Full Q/A … :
Unknown Printer

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :
Unknown Printer

epson printer problems
ANSWER : My Printer Has A Internal Erro

Read Full Q/A … :
Unknown Printer

Weird Problem: Epson R2400 Printer won't power on
ANSWER : I just had exactly the same thing happen. The printer is usually on, but now is off and will not power on. Anybody know what is going on? Is there a fuse blown? Where would that fuse be?

Read Full Q/A … :
Unknown Printer

newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…

Read Full Q/A … :
Unknown Printer

Epson Stylus sx130 Printer does not power on…
ANSWER : I have had the same problem with Epson px660. I have replaced the main board twice with the same problem recurring after printing many copies of documents..there are some transistors at the back of the main board which when removed the printer will power on but will not recognize the cartridge..so I’m still wondering of the power supply is short circuiting the main board…a

Read Full Q/A … :
Unknown Printer

PRINTER MX 320 CANON ALL IN ONE PRINTER
ANSWER : Probably a worn feed roller. You can try cleaning it with a damp rag as it might just be covered with paper dust.

Read Full Q/A … :
Unknown Printer