Epson Stylus Photo 820

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. Make sure the paper type setting matches the type of paper you loaded. Make sure you loaded the printable side of the paper correctly for your product.
What should I do? If your printouts contain misaligned vertical lines, you may need to run the print head alignment utility from the driver to align the print head. Your printer must be connected to a local port, not on a network, to use the Print Head Alignment utility.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
Your printer may be printing pink as the other ink cartridges have run out. Common printer-to-page technology processes colour in four parts; cyan, magenta, yellow and black (CMYK), or toner. The ink cartridges in your inkjet or colour laser printer are split up into four colours.
There are four primary causes for horizontal banding on prints from inkjet printers, (1) nozzle clogs, (2) mis-aligned print heads, (3) low quality print settings (4) incorrect paper thickness settings. Below we will describe each of these causes for horizontal banding as well as ways to try and fix them.
Vertical lines in prints are an early warning sign of a low ink cartridge, which may show up before the printer`s low ink alerts start. You can fix the problem by replacing the low cartridge. Gently shaking the drained cartridge a bit may help to get another few prints out of it without vertical lines.
Double printing can occur for several possible reasons including an improperly seated ink tank, a misaligned print head, and a dirty encoder stip. Select one of the links below to get detailed instructions to address the issue. Check that all ink tanks are seated properly. Refer to Replace an ink tank.
The ink cartridges may be old or low on ink, and you may need to replace them. Your printed colors can never exactly match your on-screen colors. However, you can use a color management system to get as close as possible. Try using the color management options in your printer software.
If your printouts are blurry or smeared, try these solutions: Make sure your paper is not damp, curled, old, or loaded incorrectly in your product. Slide the edge guides to the edges of the paper. Use a support sheet with special paper, or load special paper one sheet at a time.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.

Read Full Q/A … :

Epson Stylus Photo 820

EPSON How to print in black when color ink is out?
ANSWER : Yup. Epson can suck my fat hairy toes. Spent a S#!$ load on a new black ink cartridge for it to still not work.

Read Full Q/A … :

Epson Stylus Photo 820

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus Photo 820

My 2550n Color LaserJet does not want to print in color
ANSWER : That model had issues with the carousel solenoid sticking. That might explain why it works after you let it sit for 10 minutes. The solenoid gets hotter with use which causes the deteriorated foam on it to become sticky and hold down the release plate instead of letting it go. This allows the carousel to spin when it is supposed to stop for each color. The solenoid is located on the right side of the printer. If you open the lid, it is just behind the opening at the top right. You need to remove the top of the printer and scrape off the goo on top of the solenoid body. I put a piece of thin sticky backed felt to replace it. Other people use electrical tape.

Read Full Q/A … :

Epson Stylus Photo 820

printing issues with hortizonal color lines
ANSWER : Click on printer setup button on the printer control panel

Read Full Q/A … :

Epson Stylus Photo 820

Epson Printer not printing
ANSWER : My EPSON printer was also not printing anything, I tried a lot to fix that but unable to fix. At last I got this link http://www.printer-techsupport.com/Epson-printer-support.html I just visited and made a call on their toll free. I got instant help from a certified technician to fix my printer.

Read Full Q/A … :

Epson Stylus Photo 820

Epson Stylus Color 3000
ANSWER : Hi i’ve a problem with my espon 3000… i’ve didn’t use it for a while (maybe 3 years) and now i bought new compatible cartridge but the printer doesn’t print anything… maybe the printhead is blocked or anything else.. can you help me?

Read Full Q/A … :

Epson Stylus Photo 820

Printer only printing every other line
ANSWER : It had been the same matter, could not find a proper broker and approach for earnings in the long run had to rummage through the Internet, and there I discovered this page http://bestoptionstrategies.net . Possibly you will learn there is a remedy to your problem, many thanks for the curiosity!))

Read Full Q/A … :

Epson Stylus Photo 820