Epson Stylus Photo R300

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Make sure your paper meets the specifications for your product. If paper dust builds up on the rollers, they may lose traction and become unable to feed paper properly. Clean the paper guide. If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary.
If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it. If multiple pages continue to feed at once, turn on the Paper Feed Assist Mode setting in the Setup > System Administration > Printer Settings menu. Do not load more than the recommended number of sheets.
Press these down, hold… and then, press and hold the Power/On button as well. Hold for about 10 seconds and then release. Now turn the printer off, wait until the lights go out and then turn the printer back on and you should now find the waste counter has been reset.
You can use a Bluetooth®-enabled PDA, phone, computer, or other device to send images to your printer wirelessly with an optional Bluetooth photo print adapter.
There are a number of reasons why this might happen. In a large number of cases we come across, the photo paper weight (which is measured in GSM) or overall thickness exceeds the printer`s ability meaning it is too think or too heavy for the rollers to successfully handle.
Select > Paper Setting > paper source > Print Adjustments > Paper Feed Adjust.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
There is a Windows 10 driver available for this model of printer but according to the manufacturer`s website this should be installed automatically.
EPSON recommends using plain photocopy or bond papers for your everyday printing. For digital photos that look and feel like traditional photos, choose one of the EPSON Premium Photo papers.
If the paper feed rollers are dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed rollers. Cleaning will wear out the paper feed rollers, so perform this only when necessary. Make sure that the power is turned on and remove any paper from the rear tray.
The print side or shiny side of the paper is not loaded face down in the tray. The paper width guides are too tight against the paper stack. The paper feed rollers are coated with dust. Debris such an as paper clips or bits of paper might have fallen into the paper path.
The common reasons for this issue are various, for instance, the paper input tray is overloaded, dust or moisture can affect the paper feed or paper pick rollers, the printer driver is old, etc. Thus, the printer cannot detect the paper that has been inserted into the tray.
With dot matrix printers, paper is often feed through pins on a wheel that grab and slowly move paper through the printer. With inkjet and other page printers, paper is fed through the printer with rollers that grab and move the paper through the printer.
1. or feed roller : a roll or one of two or more rolls by which material is drawn or fed into a machine. 2. : one of a set of small rubber rolls under the platen of a typewriter that help to roll the paper and hold it in place during typing.
Paper Feed Rollers

Created with a blending technology developed based on our extensive experience, these materials offer both a high friction coefficient retaining characteristic and superb abrasion resistance. We also mass-produce belt-shaped samples, in addition to ordinary rolls.

Water based inks are simple: wipe off the excess ink with wiping canvas or with some newsprint, then just rinse with water. You may use a mild soap and lukewarm water. Dry thoroughly. If you are using oil based inks, first wipe off the ink with some paper or old rag.
When Roll Auto Cut Off is selected, this button feeds the paper if pressed and held for 3 seconds. Then you can cut the paper using the manual cutter unit. When the printer is drying ink, this button stops the ink drying process and ejects the paper if pressed and held for 3 seconds.
Press the home button, if necessary. Select Settings > Printer Settings > Paper Source Settings. You see a screen like this: Make sure the Paper Configuration setting is set to On.
This error occurs if the firmware update procedure is interrupted, e.g. an accidental powering off of the product, cables being removed, or the installation being canceled. To recover from this error, Epson will instruct customers to update their printers with the latest version of the firmware.
Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language.
Hey, you can reset Epson ink cartridge without resetter! As shown above, you can reset Epson chips by pressing and holding the button above the chip with a bent paper clip for 10 seconds.
Epson Connect provides mobile services that allow you to print and scan from anywhere. You can print photos and documents using your smart phone, tablet, or mobile computer from your home, your office, or anywhere in the world.
The good news is that pretty much any printer purchased within the last four to five years – or any printer that you`ve successfully used with Windows 7, 8 or 8.1 – should be compatible with Windows 10.
Yes, you can use normal printer ink on inkjet heat transfer paper. Original or compatible inks will be okay to use. Pigment-based inks have a slight advantage over dye-based inks with its ability to last longer. There is also no need to customize an inkjet printer in order to handle heat-transfer paper.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson stylus photo R300
ANSWER : Had the same problem with the VM cartridge, I cleaned and put it back several times not luck,then the MK started acting up as well, cleaned it and put it back and worked, the VM however was still acting up. I turned the printer off and took out the VM and put it back without cleaning, turned on the printer and the VM is working now….come on Epson what the hell is wrong with this system.

Read Full Q/A … :

Epson Stylus Photo R300

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :

Epson Stylus Photo R300

Epson Stylus Photo T60 paper jam
ANSWER : paper jam

Read Full Q/A … :

Epson Stylus Photo R300

Epson R300 ink cartridge cannot be recognized HELP
ANSWER : Hi Donna

Read Full Q/A … :

Epson Stylus Photo R300

Epson Stylus Photo R230(2 red indicator blinking)
ANSWER : 2 red indicator blinking

Read Full Q/A … :

Epson Stylus Photo R300

Need help for cleaning epson r300, have a kit
ANSWER : Don’t worry about the paper towel. Keep the heads as far to the right as you can and the fluid will just go into the waste sponge underneath. There’s nothing you can damage with the fluid. I wouldn’t worry about the pad that got torn. Just insert the syringe in the nozzle and gently push the fluid down into the heads. This site sold tens of thousands of those kits and I guess the instructions were pretty good because there was never a single complaint.

Read Full Q/A … :

Epson Stylus Photo R300

epson stylus photo 2000p problems
ANSWER : plz i just receive epson stylus photo 2000p from a friend and the ink light are on nothing is working plz help

Read Full Q/A … :

Epson Stylus Photo R300

What is the best approach to maintain my Epsons?
ANSWER : ooops.. i was looking for an edit button and upvoted my post by misteke.. oh well…

Read Full Q/A … :

Epson Stylus Photo R300