Epson LQ 300

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

You can use a Bluetooth®-enabled PDA, phone, computer, or other device to send images to your printer wirelessly with an optional Bluetooth photo print adapter.
There is a Windows 10 driver available for this model of printer but according to the manufacturer`s website this should be installed automatically.
Press these down, hold… and then, press and hold the Power/On button as well. Hold for about 10 seconds and then release. Now turn the printer off, wait until the lights go out and then turn the printer back on and you should now find the waste counter has been reset.
You can connect a mobile device directly to the printer without a wireless router or access point. Note: Make sure the Epson Smart Panel app is installed on your mobile device before connecting to the printer. Press the home button, if necessary.
regular 8.5×11-inch printer that puts the emphasis on photo quality rather than document output, the Epson XP-8600 is an excellent choice.
Make sure your paper meets the specifications for your product. If paper dust builds up on the rollers, they may lose traction and become unable to feed paper properly. Clean the paper guide. If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary.
If your Epson printer displays an offline notice, it signifies there is a connectivity problem between the printer and the computer. Some hardware or software faults prevent Epson printers from communicating with computers. A slow or stopped `Spooler` service can make your printer to go offline.
The print head nozzles may need cleaning. The ink cartridges may be old or low on ink, and you may need to replace them. Make sure the paper Type or Media Type setting matches the paper you loaded. Make sure your paper isn`t damaged, old, dirty, or loaded face-down.
The WEP key or WPA/WPA2 preshared key/passphrase is not the same as the password for the access point. The password lets you access the access point settings. The WEP key or WPA/WPA2 preshared key/passphrase allows printers and computers to join your wireless network.
Connect your computer or device to your wireless network router. Set the connection mode switch on the side of the scanner to the Wi-Fi position. Wait for the ready and Wi-Fi lights on the scanner to stop flashing and stay on, indicating that the scanner is connected to the network.
With Epson Email Print, you can print remotely from your Android device to your Epson printer. Note: You need to be on the same network as your printer to assign an email address from the Epson iPrint app. Once you have assigned an email address to the printer, you can print remotely.
Set your printer as the default printer

Select your printer and then select Open queue. Select Printer, then select Set As Default Printer, and clear Pause Printing and Use Printer Offline if they are selected. If you see a message that says, “Windows will stop managing your default printer for you,” select OK.

Epson Stylus NX420 All-in-One Printer (Wireless)
You will get high-quality printouts from Epson printers as they provide a good resolution of up to 4800 × 1200 dpi. The ink cartridges used in these printers are cheap and affordable. You can also save money on printing costs by buying re-manufactured cartridges for your Epson printer.
Best Epson Photo Printer

If you want to print photos, get the Epson EcoTank Photo ET-8550, one of the best EcoTank printers we`ve tested. It uses gray and Photo Black ink in addition to the usual cyan, magenta, yellow, and black, letting it produce extremely detailed and colorful photos.

Cabling. The vast majority of modern printers use a USB connection, which can also be found on nearly all computers. Many printers have a USB Type B socket, which is square rather than the rectangular Type A socket found on most computers, but compatible cables known as USB A-B are widely and cheaply available.
Epson Stylus NX420 All-in-One Printer (Wireless)
As a rule of thumb, to achieve photo quality print, you will need to use an image resolution of 300 pixels per inch. We write this as 300 DPI and means that in each inch of your print there will be 300 pixels.
Epson Stylus NX420 All-in-One Printer (Wireless)
The M200 makes your printing process effortless with Epson iPrint, when connected to a wireless network.
Choose to print wirelessly over network or directly from connected mobile devices via Wi-Fi Direct.
Choose to print wirelessly over network or directly from connected mobile devices via Wi-Fi Direct.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson Stylus Photo T60 paper jam
ANSWER : paper jam

Read Full Q/A … :

Epson LQ 300

Epson Stylus Photo R230(2 red indicator blinking)
ANSWER : 2 red indicator blinking

Read Full Q/A … :

Epson LQ 300

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :

Epson LQ 300

Epson R320 Photo Printer Won't Print Black Ink
ANSWER : Megan !!!! YEAH!!! Mine is a WrokForce 845 and mine are refillables for years. Refilled the BLACK and it quit. 20 nozzle checks later and still nothing so I took a syringe with a piece of fish air tubing. pulled all the 4 cartridges and blew air into all colors, cleaned the contacts and two cleanings and WALLAAA!!! Prints great.

Read Full Q/A … :

Epson LQ 300

Epson stylus photo R300
ANSWER : Had the same problem with the VM cartridge, I cleaned and put it back several times not luck,then the MK started acting up as well, cleaned it and put it back and worked, the VM however was still acting up. I turned the printer off and took out the VM and put it back without cleaning, turned on the printer and the VM is working now….come on Epson what the hell is wrong with this system.

Read Full Q/A … :

Epson LQ 300

epson stylus photo 2000p problems
ANSWER : plz i just receive epson stylus photo 2000p from a friend and the ink light are on nothing is working plz help

Read Full Q/A … :

Epson LQ 300

Epson Stylus Photo RX600, porous pad
ANSWER : Hi, You may have by now (Feb.2016 ) solved your problem, if not I have just used to code to reset my copy counter but as yet have not replaced the surplus ink pad tanks, what I am going to do is install an external surplus ink tank to bypass the pads as I am a bit nervous of taking my printer apart, Go to ebay and type in “RX600 surplus external ink tank” cost is well worth it, Happyhammer 20.02.16

Read Full Q/A … :

Epson LQ 300

Multiple Problems With Epson Stylus Photo R280
ANSWER : I have had my R280 for about 3 years. It has worked fine with generic cartridges for several years now. Last week it indicated I needed to replace one cartridge. I used a generic cartridge from the same manufacturer I had used before. The printer would not accept the new cartridge and now told me that I needed to replace 4 cartridges because it recognized them as non Epson. Surely there is some way to fool the printer so it does not recognize generic cartridges – which have worked well in the past and are still over half full! Anyone got any ideas?

Read Full Q/A … :

Epson LQ 300