Epson Stylus Photo EX

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The print head nozzles may need cleaning. The ink cartridges may be old or low on ink, and you may need to replace them. Make sure the paper Type or Media Type setting matches the paper you loaded. Make sure your paper isn`t damaged, old, dirty, or loaded face-down.
Make sure the USB cable is connected securely at both ends and meets the requirements. Run a printer check. If the test page prints, make sure your software is installed correctly. Make sure the printer cover is closed.
Make sure your paper meets the specifications for your product. If paper dust builds up on the rollers, they may lose traction and become unable to feed paper properly. Clean the paper guide. If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary.
The Cause of Clogs

Printheads clog because nozzles get blocked by either air or ink. Clogs usually happen when: You keep printing with depleted ink cartridges. Using empty ink cartridges can result in air bubbles that can clog your cartridge and/or printhead.

The photo tray is overloaded. The paper is curled. The print side, or shiny side, of the paper is not loaded in the tray face down. The paper width guide is too tight against the paper stack.
Connectivity issues

One of the main reasons why a printer may not be printing the photos you have asked it to is because the machine is not connected up properly.

If your wireless printer isn`t printing, be sure to check your settings. Make sure your Wi-Fi is enabled, and then check to be sure you`re connected to the correct Wi-Fi network. You can often check your connectivity by printing a network configuration sheet by selecting this option from the printer`s display menu.
The common reasons for this issue are various, for instance, the paper input tray is overloaded, dust or moisture can affect the paper feed or paper pick rollers, the printer driver is old, etc. Thus, the printer cannot detect the paper that has been inserted into the tray.
If you have problems feeding paper, try these solutions: If paper does not feed for printing, remove it from the rear feed slot or cassette. Reload it, then adjust the edge guides. Make sure the paper stack is not above the tab on the edge guides inside the cassette or rear feed slot.
Make sure your printer is on. Check if the cable is properly connected from the computer to your Epson printer. If you are using wifi, check if the devices are connected to the same network. Check for ink levels or paper jams.
Smears and smudges on the paper can be caused by dirt, dust, or toner accumulated on the rollers or transfer belt as it passes through the paper. Cleaning your printer, particularly the rollers, is one of the options for removing black markings from paper.
As a rule of thumb, to achieve photo quality print, you will need to use an image resolution of 300 pixels per inch. We write this as 300 DPI and means that in each inch of your print there will be 300 pixels.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson R320 Photo Printer Won't Print Black Ink
ANSWER : Megan !!!! YEAH!!! Mine is a WrokForce 845 and mine are refillables for years. Refilled the BLACK and it quit. 20 nozzle checks later and still nothing so I took a syringe with a piece of fish air tubing. pulled all the 4 cartridges and blew air into all colors, cleaned the contacts and two cleanings and WALLAAA!!! Prints great.

Read Full Q/A … :

Epson Stylus Photo EX

Epson Stylus Photo T60 paper jam
ANSWER : paper jam

Read Full Q/A … :

Epson Stylus Photo EX

Epson Stylus Photo R230(2 red indicator blinking)
ANSWER : 2 red indicator blinking

Read Full Q/A … :

Epson Stylus Photo EX

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :

Epson Stylus Photo EX

epson stylus photo 2000p problems
ANSWER : plz i just receive epson stylus photo 2000p from a friend and the ink light are on nothing is working plz help

Read Full Q/A … :

Epson Stylus Photo EX

Epson PX810FW printing issues, smudging.
ANSWER : Brisbane rubbish collection services have over the years made a significant contribution in keeping the city clean.

Read Full Q/A … :

Epson Stylus Photo EX

Epson Stylus Photo RX600, porous pad
ANSWER : Hi, You may have by now (Feb.2016 ) solved your problem, if not I have just used to code to reset my copy counter but as yet have not replaced the surplus ink pad tanks, what I am going to do is install an external surplus ink tank to bypass the pads as I am a bit nervous of taking my printer apart, Go to ebay and type in “RX600 surplus external ink tank” cost is well worth it, Happyhammer 20.02.16

Read Full Q/A … :

Epson Stylus Photo EX

Paper feeds straight through without printing on an Epson R2400
ANSWER : I was able to get it to print the internal test page by holding down the sheet paper feed button while turning the machine on — then continuing to hold the sheet paper feed button. It took several attempts, feeding a page straight through, but eventually it caught the sheet and printed. So it may be a timing issue as others have mentioned. It could still mean that the feed rollers are worn out. The back side of the large D-shaped feed roller has visible abrasion on it. The abrasion is difficult to see as the roller does not stay with the flat side exposed.

Read Full Q/A … :

Epson Stylus Photo EX