Epson Stylus Photo 1270

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

1 Open the paper support and pull up its extensions. 2 Open the output tray and pull out its extension. 3 Press in the release button and slide the edge guide to the left. 4 Load paper against the right edge guide and behind the tab.
EPSON recommends using plain photocopy or bond papers for your everyday printing. For digital photos that look and feel like traditional photos, choose one of the EPSON Premium Photo papers.
Make sure your paper meets the specifications for your product. If paper dust builds up on the rollers, they may lose traction and become unable to feed paper properly. Clean the paper guide. If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary.
You can connect a mobile device directly to the printer without a wireless router or access point. Note: Make sure the Epson Smart Panel app is installed on your mobile device before connecting to the printer. Press the home button, if necessary. Use the arrow buttons to select the icon and press the OK button.
For printers, it usually means Wi-Fi, Bluetooth or both.
Confirming the network status

Enter the Setup mode. Select Network Settings. Select Confirm Network Settings (Print Network Status for 1.5 inch LCDs). For Touch-panel LCDs and 2.5 inch LCDs: Check the connection status.

regular 8.5×11-inch printer that puts the emphasis on photo quality rather than document output, the Epson XP-8600 is an excellent choice.
No set standard makes a printer-specific to photos. You can, in theory, use almost any home printer to create black-and-white or color prints. Most printer software products include custom settings that will change the resolution of your print job to make them near perfect for photos.
Dust, paper fiber, and other debris might accumulate on the pick rollers and cause paper feed issues. To help prevent paper feed issues, clean the rollers inside the printer and in the duplexer (if equipped). If the other steps in this document fail to resolve the issue, then reset the printer.
Try removing the paper tray, re-aligning the paper, and sliding it back in. In other instances, there may be some paper jammed in the mechanism. Usually your printer will tell you so, and you just need to open the access panel and pull the crumpled paper out.
Printers used to output documents from a computer do not require online access to operate. Provided the document or file to be printed is stored on a local hard disk drive or on the local network, it can be printed without a connection to the Internet.
Most modern printers will have Wi-Fi, or Bluetooth, or require you to download a printer app to your phone. This allows you to send a document from your phone to a printer wirelessly. If your printer has none of these features, you will need to connect your phone to the printer using a USB cable.
You can print your documents and photos on an Epson printer connected to a wireless (Wi-Fi) network from your smartphone or tablet (iOS/Android). You can even scan and save files on your device to send them as an email, or upload to an online storage service such as Evernote, Google Docs, Dropbox, and Box.
Even if the Wi-Fi signal in that room seems fine, try moving your printer closer to the router if you`re having connection issues. If your printer has a sub-par Wi-Fi chip, it may need a super strong signal to stay connected. (This should go without saying, but make sure the Wi-Fi name and password are correct.)
Try connecting the product to another router, access point, switch or hub. Try connecting the product to your router, access point, switch, or hub with another Ethernet cable. Try printing from another computer on the network to see if the problem persists.
Connect your printer to Wi-Fi with WPS

You can also connect a printer to Wi-Fi via your device`s Wi-Fi Protected Setup (WPS) mode. This method lets you connect to a wireless network even if you don`t know its name. Just make sure you have your wireless router handy to complete these steps.

Make sure the streaming device is securely connected to the projector`s HDMI extension cable and USB power cable. Make sure that your Wi-Fi router and modem are working correctly. Restarting the device may solve the problem. Make sure there are as few obstacles as possible between this device and the Wi-Fi router.
Try connecting the product to another router, access point, switch or hub. Try connecting the product to your router, access point, switch, or hub with another Ethernet cable. Try printing from another computer on the network to see if the problem persists.
Make sure the streaming device is securely connected to the projector`s HDMI extension cable and USB power cable. Make sure that your Wi-Fi router and modem are working correctly. Restarting the device may solve the problem. Make sure there are as few obstacles as possible between this device and the Wi-Fi router.
Check your network connection as well as your network devices like your router and modem. View the network connection status of your printer and see if your printer is properly connected to the network. Reconnect or replace your network cable when necessary if your printer is using wired connection.
Make sure the streaming device is securely connected to the projector`s HDMI extension cable and USB power cable. Make sure that your Wi-Fi router and modem are working correctly. Restarting the device may solve the problem. Make sure there are as few obstacles as possible between this device and the Wi-Fi router.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson Stylus Photo R230(2 red indicator blinking)
ANSWER : 2 red indicator blinking

Read Full Q/A … :

Epson Stylus Photo 1270

Epson Stylus Photo T60 paper jam
ANSWER : paper jam

Read Full Q/A … :

Epson Stylus Photo 1270

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :

Epson Stylus Photo 1270

Epson R320 Photo Printer Won't Print Black Ink
ANSWER : Megan !!!! YEAH!!! Mine is a WrokForce 845 and mine are refillables for years. Refilled the BLACK and it quit. 20 nozzle checks later and still nothing so I took a syringe with a piece of fish air tubing. pulled all the 4 cartridges and blew air into all colors, cleaned the contacts and two cleanings and WALLAAA!!! Prints great.

Read Full Q/A … :

Epson Stylus Photo 1270

epson stylus photo 2000p problems
ANSWER : plz i just receive epson stylus photo 2000p from a friend and the ink light are on nothing is working plz help

Read Full Q/A … :

Epson Stylus Photo 1270

Epson stylus photo R300
ANSWER : Had the same problem with the VM cartridge, I cleaned and put it back several times not luck,then the MK started acting up as well, cleaned it and put it back and worked, the VM however was still acting up. I turned the printer off and took out the VM and put it back without cleaning, turned on the printer and the VM is working now….come on Epson what the hell is wrong with this system.

Read Full Q/A … :

Epson Stylus Photo 1270

Epson Stylus Photo RX600, porous pad
ANSWER : Hi, You may have by now (Feb.2016 ) solved your problem, if not I have just used to code to reset my copy counter but as yet have not replaced the surplus ink pad tanks, what I am going to do is install an external surplus ink tank to bypass the pads as I am a bit nervous of taking my printer apart, Go to ebay and type in “RX600 surplus external ink tank” cost is well worth it, Happyhammer 20.02.16

Read Full Q/A … :

Epson Stylus Photo 1270

Multiple Problems With Epson Stylus Photo R280
ANSWER : I have had my R280 for about 3 years. It has worked fine with generic cartridges for several years now. Last week it indicated I needed to replace one cartridge. I used a generic cartridge from the same manufacturer I had used before. The printer would not accept the new cartridge and now told me that I needed to replace 4 cartridges because it recognized them as non Epson. Surely there is some way to fool the printer so it does not recognize generic cartridges – which have worked well in the past and are still over half full! Anyone got any ideas?

Read Full Q/A … :

Epson Stylus Photo 1270