Unknown Printer

Experienced technical support provide their insights in answering this question :
epson l800printer head complaint start the printer first 4or 5 prints coming full megenta daily same problem what is the problem

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Place a sheet of paper under the ink tank area in case of spills. Turn on your product. If you see a message on the LCD screen indicating for you to reset the ink levels, note the ink tanks that need refilling and press the OK button. Otherwise, select Setup > Maintenance > Reset Ink Levels and press the start button.
Insufficient or lack of airflow can cause problems with your printhead from clogs to dried ink and more. The air nozzles can become blocked in the same way your printhead itself can, from dust, lint, or ink.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
In Windows, go to Printer Properties > Maintenance > Clean Heads > OK and follow on-screen prompts.
Open the printer`s web page and Sign in as Administrator. On the General tab select Reset Factory Settings in the menu.
The product prints a nozzle check pattern. Check the printed pattern to see if there are gaps in the lines. If there are no gaps, the print head is clean and you can continue printing. If there are gaps or the pattern is faint, clean the print head.
Hey, you can reset Epson ink cartridge without resetter! As shown above, you can reset Epson chips by pressing and holding the button above the chip with a bent paper clip for 10 seconds.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
What is EcoTank? It`s a new type of printer that comes with high-capacity refillable ink tanks, instead of using ink cartridges like a typical inkjet printer. It means you can print thousands of pages without the interruption of frequent replacements.
What is a Printhead? Printheads are a component in all types of digital printers that are used to transfer the desired image onto your chosen print media. The printhead will spray, write, or drop the ink onto your paper in the pattern needed to produce the finished image.
The printhead is a component in a printer that houses ink cartridges. It`s typically located under the cover of your printer, and it can become clogged with ink over time.
Clean the printhead nozzles.

Dampen a microfiber cloth with distilled water. Be sure to use distilled water to prevent any residue from being left behind. Avoid using a paper towel that could leave lint on your printhead. Carefully clean your printhead with the wet cloth to remove dried ink.

Dried Ink Buildup on the Printhead

If the print cleaning cycle doesn`t work, dried ink may be the culprit. Take the printhead out and wipe the nozzles clean to remove any buildup. Depending on the model of your printer, this may be difficult—some printheads are harder to remove than others.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

epson L800 – print head carriage problem
ANSWER : epson l800printer head complaint start the printer first 4or 5 prints coming full megenta daily same problem what is the problem

Read Full Q/A … :
Unknown Printer

Epson Stylus Pro 9000 print head problems
ANSWER : Shot in the wind. I have an Epson 9000 Stylus Pro. Have had it for a long time and take extremely good care of it. I run maybe a dozen or two 2X3 posters a year on it. I am very careful about dust and clean the machine often.

Read Full Q/A … :
Unknown Printer

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :
Unknown Printer

Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.

Read Full Q/A … :
Unknown Printer

EPSON Stylus NX400 Vista Print Problem
ANSWER : I have the similar issue. The browse button would not open the connection listing the shared printer. How can I fix it? Please respond to this post or contact me via buy essays. Thank you in advance!

Read Full Q/A … :
Unknown Printer

Epson RX500 print problems
ANSWER : if you don’t like to install ocr software to your computer, you can try this free online ocr tool

Read Full Q/A … :
Unknown Printer

can't align print head horizontally despite running program
ANSWER : Don’t call that number, it’s a phishing scam number as far as I can tell. Last thing you want to do is have them remote into your computer (they may try hacking you in the background to try & steal bank info/saved passwords) or give them a CC number for tech help since they are not directly affiliated with Epson. As far as Epson’s site shows there is no toll free tech line, only 2 800s listed on their site and 1 is presales other is for supply orders.

Read Full Q/A … :
Unknown Printer

What fluid to clean epson head?
ANSWER : There’s only 1 left, so better hurry. http://www.rjettek.com/jiecr-ocp-rinse-epson-blue/

Read Full Q/A … :
Unknown Printer