Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Right-click the printer icon on your taskbar (in the lower right corner of your screen0 and select Head Cleaning. Follow the on-screen instructions. The processing light will flash while the printer performs the cleaning cycle.
In the majority of cases, printers` self-cleaning mechanisms clean blocked printer heads by flushing the nozzles with air. The air works to dislodge dry ink inside the cartridge channels and also push it out. The intensity of the self-cleaning process of printers is usually not very strong.
Dried Ink Buildup on the Printhead

If the print cleaning cycle doesn`t work, dried ink may be the culprit. Take the printhead out and wipe the nozzles clean to remove any buildup. Depending on the model of your printer, this may be difficult—some printheads are harder to remove than others.

If any segments of the printed lines is missing, as shown below, this could mean a clogged ink nozzle or misaligned print head. If the nozzle check page does not print satisfactorily, you may need to repeat the head cleaning and print the nozzle check pattern again.
Otherwise use a printer head cleaning solution recipe of 50% water and 50% rubbing alcohol. We also like a homemade printhead cleaning solution that is 8-parts Windex to 2-parts rubbing alcohol. This printer head cleaning fluid works like a charm and it`s cheap to make!
Take a warm damp paper towel or coffee filter and blot the cartridge with the print heads facing down onto the paper towel to remove the dried ink on the print head. Then, taking a DRY paper towel or coffee filter, hold the cartridge down against the paper towel for 2-3 minutes. A dry paper towel will wick the ink out.
Choose “Printing Preferences,” and then the “Service” tab. From there, you have the option to choose “Printer Services” on the next window. You`ll see a command to “Clean Printheads,” which will start the process of cleaning the printhead without you physically removing it.
If you don`t see any improvement after cleaning the print head up to 4 times, turn off the printer and wait at least 6 hours. This lets any dried ink soften. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced.
If your printer is still skipping lines when printing, go to your print quality settings and set it to high quality. If this still doesn`t fix it, try getting new cartridges and using those to see if it makes a difference.
If the nozzle check page does not print satisfactorily (for example, if any segment of the printed lines is missing), there is a problem with the printer. This could be a clogged ink nozzle or a misaligned print head. See Cleaning the Print Head for details on cleaning the print head.
There are numerous possible causes for a printer that`s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
If the nozzle check page does not print satisfactorily (for example, if any segment of the printed lines is missing), there is a problem with the printer. This could be a clogged ink nozzle or a misaligned print head. See Cleaning the Print Head for details on cleaning the print head.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :
Unknown Printer

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :
Unknown Printer

Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.

Read Full Q/A … :
Unknown Printer

What fluid to clean epson head?
ANSWER : There’s only 1 left, so better hurry. http://www.rjettek.com/jiecr-ocp-rinse-epson-blue/

Read Full Q/A … :
Unknown Printer

Epson Stylus Pro 9000 print head problems
ANSWER : Shot in the wind. I have an Epson 9000 Stylus Pro. Have had it for a long time and take extremely good care of it. I run maybe a dozen or two 2X3 posters a year on it. I am very careful about dust and clean the machine often.

Read Full Q/A … :
Unknown Printer

Epson R3000 Inkjets Clogged
ANSWER : If you haven’t yet destroyed your printer or turned it into a paper weight, check this out:

Read Full Q/A … :
Unknown Printer

Epson, sudden cannot recognise cartridges error
ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.

Read Full Q/A … :
Unknown Printer

Epson XP600 Paper Jam
ANSWER : hi Russ .did u find solution for ur problem?? i have the same problem ,how did u fix ur printer ..will be glad if u write me on email [email protected]

Read Full Q/A … :
Unknown Printer