Epson EPL 6000

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If you notice that your print quality is uneven, too light, too dark, or there are lines in the print (banding), try these solutions: Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. Align the print head.
The ink levels may be low and you may need to refill the ink. Visually check the ink levels. Also make sure you filled the tanks with the correct colors of ink.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
One of the most common reasons why your thermal POS printer might be printing too light of an image is an accumulation of dirt, dust, or other contaminants inside your printer. Without regular cleaning and maintenance, dirt can clog up your printer and print head, causing them to wear out sooner.
The most common reason for getting faded prints is having empty or defective toner cartridges. It is unbelievably frequent that people forget to replace their empty toner cartridges and struggle to figure out why their printers print faintly. Another common reason is that people use defective cartridges.
This can happen if the driver has not been set up correctly for the media(paper/sticker) type that is being used.
Reset Button Models

It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.

Place the used maintenance box in the plastic bag that came with the new maintenance box. Seal the bag and dispose of it carefully. Insert the new maintenance box into the holder and push it all the way in. Insert the maintenance box cover into the tabs on the product as shown and tighten the screw to secure the cover.
Check the toner darkness settings.

Sometimes light print can be remedied by simply changing the toner darkness setting in the printer. To change the setting, go to MENU>>SETTINGS>>QUALITY MENU>>TONER DARKNESS. Increase the darkness and send a test print to see if that fixes the issue.

Your paper may be moist or damp. Do not store your paper in a humid or damp environment. The Toner Save mode may be on. Turn off the Toner Save mode using the printer driver.
Select Printer Settings from the drop-down list, and select the Basic settings tab. Click Automatic, then choose the resolution from the Resolution drop-down list. Note: If printing is unsuccessful or a memory-related error message appears, selecting a lower resolution may allow printing to proceed.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson EPL 6000

Epson XP600 Paper Jam
ANSWER : hi Russ .did u find solution for ur problem?? i have the same problem ,how did u fix ur printer ..will be glad if u write me on email [email protected]

Read Full Q/A … :

Epson EPL 6000

Epson Stylus PX810FW
ANSWER : You could have air in the tubing/print head.

Read Full Q/A … :

Epson EPL 6000

Epson, sudden cannot recognise cartridges error
ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.

Read Full Q/A … :

Epson EPL 6000

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Epson EPL 6000

epson 7880 adjustment wizard
ANSWER : adjustment epson stylus pro 7880

Read Full Q/A … :

Epson EPL 6000

Paper feeds straight through without printing on an Epson R2400
ANSWER : I was able to get it to print the internal test page by holding down the sheet paper feed button while turning the machine on — then continuing to hold the sheet paper feed button. It took several attempts, feeding a page straight through, but eventually it caught the sheet and printed. So it may be a timing issue as others have mentioned. It could still mean that the feed rollers are worn out. The back side of the large D-shaped feed roller has visible abrasion on it. The abrasion is difficult to see as the roller does not stay with the flat side exposed.

Read Full Q/A … :

Epson EPL 6000

Epson R3000 Inkjets Clogged
ANSWER : If you haven’t yet destroyed your printer or turned it into a paper weight, check this out:

Read Full Q/A … :

Epson EPL 6000