How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
If your printer is not detecting the cartridges, there might be the following possible reasons: The cartridge chip is dirty or damaged. They are not compatible with your printer. They are not installed properly.
Step 1: Unplug your Epson printer. Step 2: Use your computer to process a printing job before turning your printer on again. Step 3: Plug in your Epson printer. Step 4: This process will override the ink cartridge settings and print out the document.
The “Incompatible Cartridge” message may signal you that the cartridge was placed in the wrong slot. In case you get such an error, make sure the cartridge model numbers match your printer model and your country/region. After that, check if they are installed correctly in the corresponding slots.
Epson do not make ink for other manufacturers and other manufacturers do not manufacture ink for Epson. Epson recommends genuine Epson cartridges as they are specially formulated to consistently produce photo quality prints. Genuine Epson inks will also guarantee the reliability of your printer and prolong its life.
Your Epson printer may have failed to recognize the new ink cartridge, or its ink level system has read it as empty. For numerous Epson printer models, there`s a way to bypass this built-in ink checking system through a quick cartridge reset. Raise the printer`s top cover and then hold the Ink button.
Hey, you can reset Epson ink cartridge without resetter! As shown above, you can reset Epson chips by pressing and holding the button above the chip with a bent paper clip for 10 seconds.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
The ink cartridges may not have been installed using the correct procedure, or they may not be seated correctly.
Myth 1: Perhaps the most common misunderstanding is that compatible cartridges will damage your printer. There is no evidence to support this. The truth: Compatible cartridges are designed to fit into your printer and work in exactly the same way as original cartridges, even though they may look a little different.
Epson does not recommend refilling or using 3rd party ink cartridges. Using these products will not void the product`s original warranty, however, if these 3rd party products cause a failure, the repair of that failure will not be covered under warranty.
An Epson Printer can work best with an original Epson ink cartridge, but it can be coaxed to print using cloned or third party inkjet cartridges.
Epson printers contain a permanent print head that needs to be charged with all colors to work. Even when you are printing black text only, a small amount of color ink is used to keep the print head charged.
Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!
Method 1 – Bypassng Ink Cartridge on Epson Printer
After opening the lid, hold the ink button down. When you find the ink holer is moving to its position, then open the cartridge`s lid which is having no ink. Close it again without removing the cartridge. Close the lid and start to print.
Press the home button, if necessary. Press the left or right arrow button to select Maintenance > Reset Ink Level. Press the start button, the OK button twice, and then the start button again. Press the right or left arrow button to highlight the ink tank you refilled and press the OK button to select it.