Epson Stylus CX5400
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Remove the cartridges from your printer – switch your printer off. Using a piece of damp kitchen roll, gently wipe the copper plate on the cartridge. Allow the chips to air dry. Once the chips are completely dry, re-install the cartridges into your printer and switch the printer back on.
They are not installed properly. They are empty or the ink levels are pretty low. The cartridges are damaged. Using compatible cartridges may also be a reason for not recognizing them.
Method 1 – Bypassng Ink Cartridge on Epson Printer
After opening the lid, hold the ink button down. When you find the ink holer is moving to its position, then open the cartridge`s lid which is having no ink. Close it again without removing the cartridge. Close the lid and start to print.
The “Incompatible Cartridge” message may signal you that the cartridge was placed in the wrong slot. In case you get such an error, make sure the cartridge model numbers match your printer model and your country/region. After that, check if they are installed correctly in the corresponding slots.
An Epson Printer can work best with an original Epson ink cartridge, but it can be coaxed to print using cloned or third party inkjet cartridges.
Epson do not make ink for other manufacturers and other manufacturers do not manufacture ink for Epson. Epson recommends genuine Epson cartridges as they are specially formulated to consistently produce photo quality prints. Genuine Epson inks will also guarantee the reliability of your printer and prolong its life.
Yes, you can use a compatible or third-party brand of ink in your printer. Lower priced printer cartridges from third-party companies are available for almost every popular printer model and can save printer users thousands on printing costs every year.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Hey, you can reset Epson ink cartridge without resetter! As shown above, you can reset Epson chips by pressing and holding the button above the chip with a bent paper clip for 10 seconds.
The ink cartridges may not have been installed using the correct procedure, or they may not be seated correctly.
Select Print Settings from the pop-up menu. Select plain papers or Envelope as the Media Type setting. Select the Grayscale check box. Click Print to close the Print dialog box.
If you accidentally insert your inkjet`s cartridges in the wrong color slots, most printers sense the error through circuits that check installed consumables and alert you with an on-screen message. Until you correct this type of installation mixup, your printer simply won`t operate.
This is usually caused by a non-flow of ink from the cartridge through the print head. In the case of an ink cartridge with an integrated printed head, take a warm damp cloth and gently wipe it across the print head until you see a flow of ink on the tissue or cloth.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.
Read Full Q/A … :
Epson Stylus CX5400
generic ink cartridges will not work
ANSWER : Hi Fastedd
Read Full Q/A … :
Epson Stylus CX5400
Tell me the best aleternative option of Epson Expression XP-400 ink cartridges ?
ANSWER : I’ve had good success with www.ccs-digital.com products
Read Full Q/A … :
Epson Stylus CX5400
Epson ink cartridge leaking?
ANSWER : Posting this cause it worked for me. I have an Artisan 837 that was leaving pools of blue on the page. I tried Epson’s recommendation of cleaning the print path by pressing the copy button on the control panel (with nothing on the flatbed). Printed 5 pages and the last 2 were clean. Did a test print and the problem was back. Repeated a few times with the problem reocccuring. Switched out the cartridge. no better and now the printer doesn’t recognize its own brand cartridge. Yet, it accepts the 3rd party one.
Read Full Q/A … :
Epson Stylus CX5400
Epson R300 ink cartridge cannot be recognized HELP
ANSWER : Hi Donna
Read Full Q/A … :
Epson Stylus CX5400
Epson RX620 Ink cartridges cannot be recognized
ANSWER : Hd snapping the ink cartridges in better, as per other people’s instructions, and no go. I got all frustrated, banged the printer’s side, and reposed in and out the dang cartridges and nada. Got all pissy and told the printer to Proceed with low Levels. I clicked Print and then when the epson printer icon came on, I clicked on settings and Ink supply levels. In here, it said my YELLOW ink was low, and yet on my epson printer screen, it kept saying my black levels were low. wtf. i had an extra yellow as I hadn’t changed it out with the cyan and blue and yep, all working now. geez. try your computer instead of the printer!!
Read Full Q/A … :
Epson Stylus CX5400
Epson, sudden cannot recognise cartridges error
ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.
Read Full Q/A … :
Epson Stylus CX5400
Epson R3000 Inkjets Clogged
ANSWER : If you haven’t yet destroyed your printer or turned it into a paper weight, check this out:
Read Full Q/A … :
Epson Stylus CX5400