Epson Stylus CX5400

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Epson Stylus Series | Single Function Inkjet Printers | Printers | Epson® Official Support.
Connect your product to your Mac using a USB cable and make sure the product is turned on. You`ll need to download and install the Epson Wireless Setup utility to establish the connection to your router. Connect your product to your Mac using an Ethernet cable and make sure the product is turned on.
stylus printer – an impact printer in which each character is represented by a pattern of dots made by wires or styli.
Epson Stylus NX420 All-in-One Printer (Wireless)
Most styluses work via capacitive technology, which is all about heat and pressure. When you push the stylus onto the screen, it senses the heat and thus elicits a reactionary response. Check out this infographic to see how a stylus pen works! The stylus tip, aka the nib, comes into contact with the screen.
A stylus is a pen shaped instrument with a round rubber piece that moves effortlessly across touchscreen devices. It is an instrument used to navigate on a phone or tablet. A stylus is used by placing it on the touchscreen surface. Some styluses include a pen incorporating 2 writing instruments into 1 tool.
You can connect a mobile device directly to the printer without a wireless router or access point. Note: Make sure the Epson Smart Panel app is installed on your mobile device before connecting to the printer. Press the home button, if necessary.
Yes, the Epson Connect Service is free.
Above or below the plastic holder containing the cartridges, a sticker indicates what type of ink cartridges your printer uses. The sticker also contains red, yellow and blue circles representing Magenta, Yellow and Cyan colors. If you see the sticker, you have an inkjet printer.
Countering LaserJet Benefits

While Epson`s printers are inkjets, they have solved some of the technology`s problems.

Epson SureColor P600 Wide Format Inkjet Printer.
Epson SureColor P600 Wide Format Inkjet Printer.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Need help for cleaning epson r300, have a kit
ANSWER : Don’t worry about the paper towel. Keep the heads as far to the right as you can and the fluid will just go into the waste sponge underneath. There’s nothing you can damage with the fluid. I wouldn’t worry about the pad that got torn. Just insert the syringe in the nozzle and gently push the fluid down into the heads. This site sold tens of thousands of those kits and I guess the instructions were pretty good because there was never a single complaint.

Read Full Q/A … :

Epson Stylus CX5400

Epson 2200 – factory rep, can you help me?
ANSWER : You can feed the paper through the manual feed slot in the back. Read this and try it. http://www.steves-digicams.com/2002_reviews/epson_2200.html

Read Full Q/A … :

Epson Stylus CX5400

Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.

Read Full Q/A … :

Epson Stylus CX5400

Epson Stylus C64 in problems, Help!!!!
ANSWER : a lucky tip – if all else fails and you don’t have a PC instead of a Mac, try what I did on my C63. When the head finished moving and both red lights flashed with a “general error’ message, turn off the printer power supply and physically slide the head from its rest position to the far left of the printer. This seems to re-set the “foreign body” trigger. Turn the power back on, the head slowly moves back to the rest position and hey presto the lights have stopped flashing and the printer works! Sounds clumsy but you have nothing to lose trying it, the cost of repair exceeds the value of a 10 year old printer.

Read Full Q/A … :

Epson Stylus CX5400

Epson 9800 dmzcompute needs help
ANSWER : On one of my epsons when i went to the menu and widened the platen gap it seemed to help the paper jam. Try that as well. Also they say cleaning the encoder strip & also making sure the encoder strip is clicked into place all the way. Hope some of this helps.

Read Full Q/A … :

Epson Stylus CX5400

Epson R300 ink cartridge cannot be recognized HELP
ANSWER : Hi Donna

Read Full Q/A … :

Epson Stylus CX5400

HELP Epson Sylus 1400
ANSWER : In print dialog box, try setting “Color Matching” to “Epson Color Controls”, then in “Print Settings” choose “Grayscale” instead of “Color”. I also recommend choosing “Quality” over “Speed”. This has worked for me on Mac OS.

Read Full Q/A … :

Epson Stylus CX5400

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus CX5400