Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Remove the cartridges from your printer – switch your printer off. Using a piece of damp kitchen roll, gently wipe the copper plate on the cartridge. Allow the chips to air dry. Once the chips are completely dry, re-install the cartridges into your printer and switch the printer back on.
You can also tell which cartridge is empty by checking the speed at which the error light flashes when the print head moves to the ink cartridge replacement position. See the table below. Replace the black ink cartridge if the error light flashes at the same speed as the power light.
Method 1 – Bypassng Ink Cartridge on Epson Printer

After opening the lid, hold the ink button down. When you find the ink holer is moving to its position, then open the cartridge`s lid which is having no ink. Close it again without removing the cartridge. Close the lid and start to print.

Turn off the ink monitor by checking off the “Disable Epson Status Monitor” found within a box. And lastly, click “Save” and close the window. That`s about it the printer and the cloned ink cartridges can now start printing operation.
Your printer may not recognize the new ink cartridge, or the ink counter may read it as empty. Many printers have a cartridge reset feature that forces the machine to recognize the cartridge as new.
Your Epson printer may have failed to recognize the new ink cartridge, or its ink level system has read it as empty. For numerous Epson printer models, there`s a way to bypass this built-in ink checking system through a quick cartridge reset. Raise the printer`s top cover and then hold the Ink button.
The HP toner cartridges used with this product contain a memory chip that assists in the operation of the product. In addition, this memory chip collects a limited set of information about the usage of the product, which might include the following: The date when the toner cartridge was first installed.
Each printer uses an optical sensor in which shines a light through a prism at the bottom of the ink well. Once ink levels fall to a predetermined level, a beam of light bounces towards a low-ink sensor, which again triggers an on-screen message that tells you to replace the cartridge.
I replaced an ink cartridge, but my product shows that the same ink is expended. What should I do? The ink cartridges may not have been installed using the correct procedure or they may not be seated correctly. Follow the instructions below to correctly install and reseat the ink cartridges.
Starter cartridges are filled with less ink than a standard yield cartridge, so you can expect to print a limited number of pages before they need to be replaced. You can tell that a starter cartridge is installed by looking at the part number on the side of the cartridge.
There is a possibility that it didn`t properly click into the designated slot. If this is the case, you should lift the cover and double-check in order to verify that the cartridge is clicked into place. Otherwise, it would not be possible for the printer to detect it.
Hey, you can reset Epson ink cartridge without resetter! As shown above, you can reset Epson chips by pressing and holding the button above the chip with a bent paper clip for 10 seconds.
The “Incompatible Cartridge” message may signal you that the cartridge was placed in the wrong slot. In case you get such an error, make sure the cartridge model numbers match your printer model and your country/region. After that, check if they are installed correctly in the corresponding slots.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
When color ink is expended and black ink still remains, you can continue printing for a short time using only black ink. However, you should replace the expended ink cartridge(s) as soon as possible.
Just like computers, printers have volatile memory (RAM) that is removed when you turn the printer off.
An original printer cartridge that comes with your printer is likely closer to 24 months, while a compatible cartridge may come closer to 36 months. Check the expiration dates so you can prioritize use of cartridges with earlier dates. Think of the expiration date more in terms of a dry good than a carton of milk.
If an ink cartridge is unopened or not used, so long as it`s kept away from humid environments, it should last at least 2 years.
Nowadays, almost all printers have some sort of memory installed in them. This allows for the storage of data so that it can be recalled and reprinted later without having to go through the entire printing process again.
Click Print or Page Setup on the File menu of your application. The Print dialog box appears. Click the Utility icon button, then click the EPSON StatusMonitor button in the Utility dialog box. A graphic displaying the amount of ink remaining will appear.
This error occurs due to the chip on your cartridge still reporting a low or empty ink level from its previous use. The chip itself cannot be reset, so when the cartridge is refilled and then installed into a new machine it will still register as empty.
Black Print Mode allows you to print only with black ink as a temporary emergency measure to minimise the down time in the event any colour inks are expended, even if there is no replacement cartridges available.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :
Unknown Printer

Epson, sudden cannot recognise cartridges error
ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.

Read Full Q/A … :
Unknown Printer

Tell me the best aleternative option of Epson Expression XP-400 ink cartridges ?
ANSWER : I’ve had good success with www.ccs-digital.com products

Read Full Q/A … :
Unknown Printer

Epson R300 ink cartridge cannot be recognized HELP
ANSWER : Hi Donna

Read Full Q/A … :
Unknown Printer

Epson ink cartridge leaking?
ANSWER : Posting this cause it worked for me. I have an Artisan 837 that was leaving pools of blue on the page. I tried Epson’s recommendation of cleaning the print path by pressing the copy button on the control panel (with nothing on the flatbed). Printed 5 pages and the last 2 were clean. Did a test print and the problem was back. Repeated a few times with the problem reocccuring. Switched out the cartridge. no better and now the printer doesn’t recognize its own brand cartridge. Yet, it accepts the 3rd party one.

Read Full Q/A … :
Unknown Printer

Epson RX620 Ink cartridges cannot be recognized
ANSWER : Hd snapping the ink cartridges in better, as per other people’s instructions, and no go. I got all frustrated, banged the printer’s side, and reposed in and out the dang cartridges and nada. Got all pissy and told the printer to Proceed with low Levels. I clicked Print and then when the epson printer icon came on, I clicked on settings and Ink supply levels. In here, it said my YELLOW ink was low, and yet on my epson printer screen, it kept saying my black levels were low. wtf. i had an extra yellow as I hadn’t changed it out with the cyan and blue and yep, all working now. geez. try your computer instead of the printer!!

Read Full Q/A … :
Unknown Printer

run with empty ink cartridge
ANSWER : The only way is to buy a chip resetter and reset the chip on the cartridge. You can find them online for about $5. You just hold it against the cartridge until the light turns green. You do run the risk of damaging the printhead due to overheating because of no ink in it.

Read Full Q/A … :
Unknown Printer

Epson R3000 Inkjets Clogged
ANSWER : If you haven’t yet destroyed your printer or turned it into a paper weight, check this out:

Read Full Q/A … :
Unknown Printer