Epson Stylus C80

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

You will need to perform a nozzle search to check if any of the print head nozzles are clogged. You can clean the printhead of your Epson printer if you find any of the nozzle clogged. Check the ink cartridges of your Epson printer. It might be old or low on ink and needs to be replaced.
An ink cartridge in your printer needs to be replaced. The cartridge may be expended, or the IC chip on the cartridge may not be communicating properly. Try reseating the cartridge and turning the printer off and on. If you still see the error message, try installing a different ink cartridge in the printer.
Your new ink cartridge not working can be due to the following: Expired cartridges. Firmware has been updated. Wrong cartridge model installed.
Remove the cartridges from your printer – switch your printer off. Using a piece of damp kitchen roll, gently wipe the copper plate on the cartridge. Allow the chips to air dry. Once the chips are completely dry, re-install the cartridges into your printer and switch the printer back on.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Select your printer then press “Manage” Select “Printing Preferences” Click on the “Maintenance” tab on the far right. From there you should be able to see ink levels for your selected printer.
If the color is still not coming through, let the printer sit for about 10 minutes before running a second cleaning, this allows the ink to soak on the printhead. It might take a couple of cleanings to get a cartridge properly primed, especially if the printer has been sitting for a while.
Reset Button Models

It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.

A reset button disconnects the chip from printer temporarily. It makes the printer thinks you removed and reinserted the cartridge.
It is usually situated above the metal contacts, right in the center. Please note that the button is very small and almost unnoticeable, so don`t miss it! Use the end of a paper clip to press the button, hold it for about 10 minutes, and voila — you have just reset an Epson ink cartridge with a paper clip like a pro!
This is usually caused by a non-flow of ink from the cartridge through the print head. In the case of an ink cartridge with an integrated printed head, take a warm damp cloth and gently wipe it across the print head until you see a flow of ink on the tissue or cloth.
If the ink level is sufficient, but the printer still does not print black ink, you may need to run a cleaning cycle. A cleaning cycle is a process that cleans the printer heads and removes any clogged or dried ink.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus C80

Epson XP600 Paper Jam
ANSWER : hi Russ .did u find solution for ur problem?? i have the same problem ,how did u fix ur printer ..will be glad if u write me on email [email protected]

Read Full Q/A … :

Epson Stylus C80

Epson Stylus PX810FW
ANSWER : You could have air in the tubing/print head.

Read Full Q/A … :

Epson Stylus C80

Epson, sudden cannot recognise cartridges error
ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.

Read Full Q/A … :

Epson Stylus C80

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Epson Stylus C80

epson 7880 adjustment wizard
ANSWER : adjustment epson stylus pro 7880

Read Full Q/A … :

Epson Stylus C80

Paper feeds straight through without printing on an Epson R2400
ANSWER : I was able to get it to print the internal test page by holding down the sheet paper feed button while turning the machine on — then continuing to hold the sheet paper feed button. It took several attempts, feeding a page straight through, but eventually it caught the sheet and printed. So it may be a timing issue as others have mentioned. It could still mean that the feed rollers are worn out. The back side of the large D-shaped feed roller has visible abrasion on it. The abrasion is difficult to see as the roller does not stay with the flat side exposed.

Read Full Q/A … :

Epson Stylus C80

Epson R3000 Inkjets Clogged
ANSWER : If you haven’t yet destroyed your printer or turned it into a paper weight, check this out:

Read Full Q/A … :

Epson Stylus C80