Epson Stylus C46
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
When both the red light for your ink and paper out is flashing on your printer, then this error occurs because of a clogged printhead. The movement of the print head is blocked due to any foreign object or jammed paper. Clear it out soon as this will help to resume printing.
Answer: Red light blinking in L220 printer means the printer may have roller jam problem OR sensor problem occurs. So, please check for roller jam and fix it. Second, check the sensor`s head and clean it too. If you can`t do it manually, then check out the following video tutorial.
Some parts of the printer are broken, or there`s an internal error with the device. You need to restart your printer if you notice the `Resume` light and the Power light blinking together. There`s an improper connection. A flashing `Resume` light can also indicate a paper jam.
Flashing (slow) Indicates this product is copying, printing, receiving data, scanning, having an ink cartridge replaced, charging ink, or cleaning the print head.
The Power light blinks at a steady interval when the printer is processing a print job. If the Power light blinks fast, the ink cartridge door might be open, or the printer might be in an error state. If an error message displays on the computer screen, follow the on-screen messages to resolve the issue.
If you just replaced an ink cartridge and the power light is still flashing after 3 minutes, the cartridge may be installed incorrectly. Reinstall the ink cartridge. Paper is jammed in the product. Remove the jammed paper, and press the B&W copy button or the color copy button to clear the error.
It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.
The Wireless light blinks when the printer is attempting to connect to the wireless router or access point. Wait a few minutes, and then check the light again. If the Wireless light is on and steady, the printer is connected and you can stop troubleshooting.
Turn off the printer. Wait at least 5 seconds, then turn it back on. If the error message still appears, write down the error number listed in the LCD panel (Cffff/Eggg), turn off the product, unplug the power cord, then contact a qualified service representative.
Unplug and restart your printer
Sometimes power cycling your printer can resolve the issue. Turn off your printer and unplug it, wait 30 seconds, plug your printer back in, and then turn the printer back on.
1: Check Printer Power, Cables, and Paper
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
If both lights flash together at the same time, there is a problem with connecting to your Wifi. Turn off the printer and try again. To view the current Wifi settings, press the Wifi Report button. The printer will print details of the current Wifi settings.
The operating current for the machine while printing is approximately 3.8 amps. When the machine is warming up it may peak. This peak enables the machine to print the first page quickly. Sometimes this warm-up peaking will cause lights to flicker as the power is drawn.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Epson R2400 flashing top two lights.
ANSWER : right..i had thisroblem and have fixed it..take rear cover off .looking from back..there is a small black sensor that had come loose.. reafix..and all working good
Read Full Q/A … :
Epson Stylus C46
Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT
Read Full Q/A … :
Epson Stylus C46
Epson Stylus Photo R200 – flashing red lights
ANSWER : The R800 will flash the ink and paper lights alternately when the ink pads are assumed to be full from extensive head cleaning. Sometimes, if not always, the head will lock into place on the right side above the ink head cleaning sponges that release ink to the lower ink pads.To correct the problem you need to clean the sponge area, I use cotton swabs. If the head is locked to need to release the carriage lock with a screwdriver. This will require removing the cover, but not necessarily the bottom of the unit.There is a 179 page service manual available for download for $16.50. There are free downloads of this manual, but usually are missing the 100 pages.You can remove the cover by:1. Remove the three screws on the rear housing (One to the left of the power plug, one on the opposite side and one in the lower middle bottom.2. Remove the three screws inside the upper housing (Just under the lid where the hinge is).3. Remove the screw under the left and right side in back below the vents.4. In the back pull the white ribbon closest to you out of the block, do not try to remove the block itself.5. Place a screwdriver into the slot both on the right and lift of the bottom corners on the back to release the hooks that hold the upper unit.6. Lastly, put a screwdriver into the notches on the bottom of the printer located in the front right and left, they are spring loaded.7. Remove cover.8. The head lock release screw is in the right side of the printer and is partially covered by the lower housing. I drilled a half inch hole into the side as to be able to insert a screwdriver. Turn the screw to the left and the head will rise out of the locked position. You only need to turn enough to release the head.9. Clean the sponges and any areas you see with excess ink.10. Place the cover on the unit enough to plug the white ribbon back in and turn the unit on.If the printer lights stop flashing then you are all set.
Read Full Q/A … :
Epson Stylus C46
ALL LIGHTS FLASHING
ANSWER : Read this thread, it mostly pertains to the 760 model, but you might find something there that will work with your model.
Read Full Q/A … :
Epson Stylus C46
All lights flashing on turn on
ANSWER : If it is new, return it and get a replacement.
Read Full Q/A … :
Epson Stylus C46
Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.
Read Full Q/A … :
Epson Stylus C46
Epson Stylus C90 (Red Light Continuously Blinks)
ANSWER : It looks like General Error occurs. Check for foreign objects inside the printer which may block the movement of printhead carriage, paper feed, etc.
Read Full Q/A … :
Epson Stylus C46
My epson wf-3640 has two flashing blue lights going and will not print on command?
ANSWER : I think it is illicit anticompetitive behavior both quick essay service here in Australia and likely in different purviews too for them to look to cripple non specific ink use – and now it turns out it impairs their own particular ink and printer as well.
Read Full Q/A … :
Epson Stylus C46