Epson Stylus C46

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

When both the red light for your ink and paper out is flashing on your printer, then this error occurs because of a clogged printhead. The movement of the print head is blocked due to any foreign object or jammed paper. Clear it out soon as this will help to resume printing.
An ink cartridge is low. Make sure you have a replacement cartridge.
Wait for the power light to stop flashing before turning off the printer. The printer is connected to the wireless network. Wi-Fi connection error. Press the Wi-Fi button to clear the error and try to connect again.
Some parts of the printer are broken, or there`s an internal error with the device. You need to restart your printer if you notice the `Resume` light and the Power light blinking together. There`s an improper connection. A flashing `Resume` light can also indicate a paper jam.
The Power light blinks at a steady interval when the printer is processing a print job. If the Power light blinks fast, the ink cartridge door might be open, or the printer might be in an error state. If an error message displays on the computer screen, follow the on-screen messages to resolve the issue.
Two flashes:Printer is out of paper/Paper does not feed

Reload the paper in the Rear Tray, Cassette, or Manual Feed Slot of the Front Tray and press the RESUME/CANCEL button.

Temperature Light: If the temperature light is flashing orange or red, this typically means your projector is overheating or in need of cleaning. Be sure to clear any clutter from around the projector and to remove any items that may be blocking its vents.
Some of the causes of a blinking light on your router include outdated firmware, damaged cables, faulty components, or network outages. Restarting or resetting your router often solves these networking issues but you can also update the firmware or contact customer support.
Whatever your Wi-Fi light is labeled, a green light indicates that your router is broadcasting a Wi-Fi signal throughout your home so you can wirelessly connect your devices. A flickering light is fine, and it means your network is active.
The power light is on or flashing. The ink light is flashing. Ink in a cartridge is low. You can continue printing, or check which cartridge is low and replace it.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
Epson Printer Errors

If your printer is displaying an error code or message on the control panel, search for `Error code` on your product`s FAQs tab.

If you just replaced an ink cartridge and the power light is still flashing after 3 minutes, the cartridge may be installed incorrectly. Reinstall the ink cartridge. Paper is jammed in the product. Remove the jammed paper, and press the B&W copy button or the color copy button to clear the error.
If both lights flash together at the same time, there is a problem with connecting to your Wifi. Turn off the printer and try again. To view the current Wifi settings, press the Wifi Report button. The printer will print details of the current Wifi settings.
Answer: Red light blinking in L220 printer means the printer may have roller jam problem OR sensor problem occurs. So, please check for roller jam and fix it. Second, check the sensor`s head and clean it too. If you can`t do it manually, then check out the following video tutorial.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson R2400 flashing top two lights.
ANSWER : right..i had thisroblem and have fixed it..take rear cover off .looking from back..there is a small black sensor that had come loose.. reafix..and all working good

Read Full Q/A … :

Epson Stylus C46

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :

Epson Stylus C46

Epson Stylus Photo R200 – flashing red lights
ANSWER : The R800 will flash the ink and paper lights alternately when the ink pads are assumed to be full from extensive head cleaning. Sometimes, if not always, the head will lock into place on the right side above the ink head cleaning sponges that release ink to the lower ink pads.To correct the problem you need to clean the sponge area, I use cotton swabs. If the head is locked to need to release the carriage lock with a screwdriver. This will require removing the cover, but not necessarily the bottom of the unit.There is a 179 page service manual available for download for $16.50. There are free downloads of this manual, but usually are missing the 100 pages.You can remove the cover by:1. Remove the three screws on the rear housing (One to the left of the power plug, one on the opposite side and one in the lower middle bottom.2. Remove the three screws inside the upper housing (Just under the lid where the hinge is).3. Remove the screw under the left and right side in back below the vents.4. In the back pull the white ribbon closest to you out of the block, do not try to remove the block itself.5. Place a screwdriver into the slot both on the right and lift of the bottom corners on the back to release the hooks that hold the upper unit.6. Lastly, put a screwdriver into the notches on the bottom of the printer located in the front right and left, they are spring loaded.7. Remove cover.8. The head lock release screw is in the right side of the printer and is partially covered by the lower housing. I drilled a half inch hole into the side as to be able to insert a screwdriver. Turn the screw to the left and the head will rise out of the locked position. You only need to turn enough to release the head.9. Clean the sponges and any areas you see with excess ink.10. Place the cover on the unit enough to plug the white ribbon back in and turn the unit on.If the printer lights stop flashing then you are all set.

Read Full Q/A … :

Epson Stylus C46

My on and ink/paper buttons are flashing alternately , my Mac tells me I can not print as it is a communication error .
ANSWER : to flashing lights again. I have looked at the some say it’s the ink pads! But tried to use the download for reset but my print tells me communication error!! Someone can you help?

Read Full Q/A … :

Epson Stylus C46

ALL LIGHTS FLASHING
ANSWER : Read this thread, it mostly pertains to the 760 model, but you might find something there that will work with your model.

Read Full Q/A … :

Epson Stylus C46

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus C46

All lights flashing on turn on
ANSWER : If it is new, return it and get a replacement.

Read Full Q/A … :

Epson Stylus C46

Epson Stylus C90 (Red Light Continuously Blinks)
ANSWER : It looks like General Error occurs. Check for foreign objects inside the printer which may block the movement of printhead carriage, paper feed, etc.

Read Full Q/A … :

Epson Stylus C46