Epson Artisan 50
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The product prints a nozzle check pattern. Check the printed pattern to see if there are gaps in the lines. If there are no gaps, the print head is clean and you can continue printing. If there are gaps or the pattern is faint, clean the print head.
The primary culprit in the problem of clogged printhead nozzles, whether in Epson printers or otherwise, is air. Air blockages are fairly common, particularly because nozzles are becoming smaller, with every little bit of technological advancement. The next big culprit is, of course, dried ink.
You`ll know fairly quickly if your printhead is causing you problems. If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead.
The printhead is the component on your printer that`s responsible for transferring ink onto paper. This mechanism does this by coursing droplets of ink through numerous nuzzles to create the print. When these nozzles get clogged, this causes an uneven ink distribution resulting in faded or streaky prints.
There isn`t much that can be done in the way of repairing a printhead, only replacing parts. By the time a printer technician assesses your printer, gets the part you need, and replaces it, you could have ordered a new printhead from allprintheads.com and replaced it yourself for much less.
HP printhead lifespans can vary significantly. We`ve seen a printhead that prints 40,000 pages and have also seen some print only 2,000 or less. The HP`s one-time use cartridge should last at least ten refills, but it sometimes fails before that.
Soak the Printhead
Fill a bowl with warm water (or a mixture of water and vinegar to clean the printhead) and place the printhead directly in it. Let it sit for five minutes or so. Pull the printhead out of the water and use a lint-free cloth or paper towel to remove the dried ink.
If a printhead breaks on a home printer, it`s usually more economical to simply buy a new printer. With expensive commercial printers, it`s cost-prohibitive to buy a new printer whenever the printhead is broken, which is why it`s replaced instead.
You won`t need to clean the inside of your printer too often. Generally, aim to clean it every four to eight months, depending on your level of usage.
Print Appears With Bands/ Faded Or With Streaks
If you are seeing light banding, which can be light lines going in the direction of the printhead, you should try a Head Cleaning, as one of your printheads may not be firing correctly. Missing dots or lines also indicate that many nozzles are missing to fire/ print.
The sponge end of a blocked printer head can be cleaned with only one liquid other than water. This liquid is isopropyl alcohol. Isopropyl alcohol isn`t strong enough to melt the sponge but is still strong enough to dissolve the ink inside the blocked printer head.
If you don`t see any improvement after cleaning the print head up to 4 times, turn off the printer and wait at least 6 hours. This lets any dried ink soften. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced.
Your printer displays the “Missing or Failed Printhead” error to signal a malfunctioning printhead. The issue could be due to clogged ink nozzles, dirty ink cartridges, internal paper jams, and more. HP printers may also display this error if the printhead pulls air from ink cartridges.
Even the most inexpensive inkjet printer has a printhead. If a printhead breaks on a home printer, it`s usually more economical to simply buy a new printer. With expensive commercial printers, it`s cost-prohibitive to buy a new printer whenever the printhead is broken, which is why it`s replaced instead.
What Is a Print Head Cleaning? A print head cleaning is exactly what it sounds like; it is simply the process of removing excess ink from the cartridge or printhead to improve the flow. Printhead cleaning is often compared to car maintenance.
Printheads have 6 month warranty. Life expectancy is typically 30km.
Even the most inexpensive inkjet printer has a printhead. If a printhead breaks on a home printer, it`s usually more economical to simply buy a new printer. With expensive commercial printers, it`s cost-prohibitive to buy a new printer whenever the printhead is broken, which is why it`s replaced instead.
Printheads have 6 month warranty. Life expectancy is typically 30km.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.
Read Full Q/A … :
Epson Artisan 50
Epson Artisan 837 Cyan Ink Blotches-leaking
ANSWER : Just encountered same problem (with light magenta) and discovered it was my own fault! There’s an adhesive-backed piece of aluminum foil that serves as one wall of the ink channels in the white plastic transition junction where it connects to the printhead. In trying to clean the printhead, I apparently nicked that foil, but didn’t notice when I reassembled, so I created a real mess in the printer. I cleaned everything up and then carefully (to cover the damage but not plug the ink channel) smeared a light coating of Goop household cement over the nicked hole, let it cure for about 6 hours, put everything together, and the leaking stopped.
Read Full Q/A … :
Epson Artisan 50
Epson PX810FW printing issues, smudging.
ANSWER : Brisbane rubbish collection services have over the years made a significant contribution in keeping the city clean.
Read Full Q/A … :
Epson Artisan 50
Epson R300 ink pads and take apart
ANSWER : Hi Bob can you send me the instructions for take apart R300 photo stylus printer so i can replace the ink pads
Read Full Q/A … :
Epson Artisan 50
Epson Artisan 700 Ink Reset — Any Other Way
ANSWER : I really need the utility but How do I send you a message? I dont see your address
Read Full Q/A … :
Epson Artisan 50
Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.
Read Full Q/A … :
Epson Artisan 50
Epson Stylus Pro 9000 print head problems
ANSWER : Shot in the wind. I have an Epson 9000 Stylus Pro. Have had it for a long time and take extremely good care of it. I run maybe a dozen or two 2X3 posters a year on it. I am very careful about dust and clean the machine often.
Read Full Q/A … :
Epson Artisan 50
Epson TM-U220 no test printing, troubleshoot nada
ANSWER : My TM U220 also not printing, it appears that windows do not recognise it. The internal test sugested above does not work either. Any suggestion would be welcome.
Read Full Q/A … :
Epson Artisan 50