Dell Inkjet 922

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If you notice white or dark lines in your prints (also called banding), try these solutions before you reprint: Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. Make sure the paper type setting matches the type of paper you loaded.
There are four primary causes for horizontal banding on prints from inkjet printers, (1) nozzle clogs, (2) mis-aligned print heads, (3) low quality print settings (4) incorrect paper thickness settings. Below we will describe each of these causes for horizontal banding as well as ways to try and fix them.
If your Epson printer is printing out faint images, skipping lines, or is streaking your image with lines, chances are you have a clogged nozzle–a common problem many users have with Epson printers. It`s unavoidable that print heads clog over time as small amounts of ink residue dry up and collect in the nozzles.
The band-shaped “stripes” are called “horizontal bands” or “banding.” Horizontal bands are caused by the subtle changes in the movement distance that occur when feeding the media depending on the media`s thickness. We recommend making corrections to match the media you are using.
Although the printer might be correctly configured to print in Portrait mode, the program itself might be configured to print in Landscape mode. These settings are typically adjusted by locating a Page Setup or Page Layout menu and then looking for Orientation.
Inkjet Printers Can Have Low Print Quality

Don`t get us wrong—inkjet printers actually usually shine in the print-quality department in comparison to their laser companions. Where they may have trouble is print text-rich documents, especially if the ink is running low or the print heads are clogged.

If your printouts are blurry or smeared, try these solutions: Make sure your paper is not damp, curled, old, or loaded incorrectly in your product. Slide the edge guides to the edges of the paper. Use a support sheet with special paper, or load special paper one sheet at a time.
Changing the status of the printer:

In the Devices and Printers window right-click or tap and hold on your printer and select See what`s printing. Click or tap the Printer tab, then untick Use Printer Offline from the menu.

Clogged printhead nozzles or low ink levels are the most common cause for blank or light bands. Use the built-in cleaning cycle or manually clean the printhead. For vertical blank bands, check for paper or labels blocking the print in specific areas.
Epson Printer

In the Devices and Printers window, select your printer and click on Printing Preferences. Click on Maintenance in the window that opens. Click on Print Head Alignment to launch the dialogue box. Follow the instructions to complete the alignment.

Align the print head. Make sure you are using genuine Epson ink cartridges. If you use non-Epson ink cartridges, printouts may be faint, or the color of the printed image may be uneven because the remaining ink level is not correctly detected. Make sure your ink cartridges have not expired.
Banding happens when you do not have enough information in your file. Or you push the edits to an extreme. Avoid banding by making a well-exposed photograph and saving it as an uncompressed RAW file. To fix color banding, make subtle edits and limit how much you compress the photo when exporting as a JPEG.
Two horizontal lines will always be parallel to each other. Meaning that they can be considered to have a 180 or a 0 degrees angle between one and another.
If your printouts are slanted, try these solutions: Slide the edge guides against the edges of the paper. Select a higher print quality setting in your printer software. Align the print head.
An inkjet printer printing lines or missing lines on printouts are caused when the printer cartridges or the cartridge carriage which contains the print head becomes dirty or damaged.
Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.
Faulty and loose connections are the most common cause of horizontal lines on a TV. If you recently moved your TV, you might not have properly connected the cables. This is especially true if you`re using HDMI cables. Loose cables can easily slip out of their ports.
Horizontal lines are always parallel to the x-axis. The lines are always written in the form y = a y=a y=a where a represents a real number.
If the quality of your printouts remains poor even after repeatedly cleaning and aligning the print head, one or some of the ink cartridges may be old or damaged and should be replaced. To replace an ink cartridge before the Status Monitor notifies you that the cartridge is empty, see Replacing an Ink Cartridge.
The printer driver`s online help provides details on printer driver settings. Open the Print dialog box. Select Printer Settings from the drop-down list, and select the Basic settings tab.
Press the home button if necessary and select Settings > Maintenance > Replace Maintenance Box > See Guide. Open the maintenance box cover on the back of the product. Pull out the maintenance box carefully without tilting it. Warning: If ink gets on your skin, wash it thoroughly with soap and water.
If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or light horizontal bands, you may need to align the print head. You can align the print head automatically from the control panel or your computer, or align it manually from the control panel.
Uneven, Blotchy, Non-Uniform or Mottled looking prints are caused by difficulty transferring Toner to the paper.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Dell Inkjet 922

Red Lines on Epson printer
ANSWER : The problem is apparently a hardware design shortcoming. The intervals of streaking match every second movement of the print head across the page. The evidence is from five 2.000 (+/- .003) inch spaced repetitions of an image (for business cards). The streaks show up at corresponding locations within the images. They may be consistently bright (paper advance defect), or appear somewhat randomly bright or dark (print head suspension worn out).

Read Full Q/A … :

Dell Inkjet 922

Epson XP600 Paper Jam
ANSWER : hi Russ .did u find solution for ur problem?? i have the same problem ,how did u fix ur printer ..will be glad if u write me on email [email protected]

Read Full Q/A … :

Dell Inkjet 922

Epson, sudden cannot recognise cartridges error
ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.

Read Full Q/A … :

Dell Inkjet 922

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Dell Inkjet 922

epson 7880 adjustment wizard
ANSWER : adjustment epson stylus pro 7880

Read Full Q/A … :

Dell Inkjet 922

Epson Stylus PX810FW
ANSWER : You could have air in the tubing/print head.

Read Full Q/A … :

Dell Inkjet 922

Paper feeds straight through without printing on an Epson R2400
ANSWER : I was able to get it to print the internal test page by holding down the sheet paper feed button while turning the machine on — then continuing to hold the sheet paper feed button. It took several attempts, feeding a page straight through, but eventually it caught the sheet and printed. So it may be a timing issue as others have mentioned. It could still mean that the feed rollers are worn out. The back side of the large D-shaped feed roller has visible abrasion on it. The abrasion is difficult to see as the roller does not stay with the flat side exposed.

Read Full Q/A … :

Dell Inkjet 922