Epson Stylus Color 880
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. Make sure the paper type setting matches the type of paper you loaded. Make sure you loaded the printable side of the paper correctly for your product.
What should I do? If your printouts contain misaligned vertical lines, you may need to run the print head alignment utility from the driver to align the print head. Your printer must be connected to a local port, not on a network, to use the Print Head Alignment utility.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
When vertical banding appears or the paper is smeared, clean the paper path. You may need to replace the ink cartridges.
A blueline is a print of an ad, brochure, or other advertising materials produced on photosensitive paper (hence the blue color). This process was once used to confirm the location of all artwork, headlines, graphics, and text components before printing.
Streaks and unwanted lines could mean that the printer heads are out of alignment. There`s an alignment tool in the printer`s control panel. If that`s not the issue then the printer is dirty. Printer ink stripes may appear along the edges of the paper, which means there`s ink on the rollers and other parts.
There are four primary causes for horizontal banding on prints from inkjet printers, (1) nozzle clogs, (2) mis-aligned print heads, (3) low quality print settings (4) incorrect paper thickness settings. Below we will describe each of these causes for horizontal banding as well as ways to try and fix them.
A horizontal line is a straight line that goes from left to right or right to left. In coordinate geometry, a line is said to be horizontal if two points on the line have the same Y- coordinate points. It comes from the term “horizon”. It means that the horizontal lines are always parallel to the horizon or the x-axis.
If spots or lines appear in all your scanned images, try these solutions: Clean inside the scanner using a cleaning sheet. Calibrate the scanner using a calibration sheet. Make sure the surface of your original is clean.
Whiteprint describes a document reproduction produced by using the diazo chemical process. It is also known as the blue-line process since the result is blue lines on a white background. It is a contact printing process which accurately reproduces the original in size, but cannot reproduce continuous tones or colors.
And then in the early 1800s, the blue-lined paper appeared. Eventually, the red vertical margins were added. This is the kind of lined paper we see in notebooks in the US. The blue lines are there to guide your hand straight across the page.
Streaking is usually caused by a worn out drum unit or spent toner cartridge. Drum units are a consumable and only need to be replaced after the use of 3 or 4 toners. Not all printers use a separate toner and drum unit.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.
Red Lines on Epson printer
ANSWER : The problem is apparently a hardware design shortcoming. The intervals of streaking match every second movement of the print head across the page. The evidence is from five 2.000 (+/- .003) inch spaced repetitions of an image (for business cards). The streaks show up at corresponding locations within the images. They may be consistently bright (paper advance defect), or appear somewhat randomly bright or dark (print head suspension worn out).
Epson 7880 ink pump sucking ink
ANSWER : Not ink pump, but air pump, to put the ink feed under pressure.
Epson R3000 Inkjets Clogged
ANSWER : If you haven’t yet destroyed your printer or turned it into a paper weight, check this out:
Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.
Epson Artisan 700 Ink Reset — Any Other Way
ANSWER : I really need the utility but How do I send you a message? I dont see your address
Epson Stylus PX810FW
ANSWER : You could have air in the tubing/print head.
Epson, sudden cannot recognise cartridges error
ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.