Epson LQ 870

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Check if the cable is properly connected from the computer to your Epson printer. If you are using wifi, check if the devices are connected to the same network. Check for ink levels or paper jams. Flashing ink out light means low ink.
Your Epson printer may have failed to recognize the new ink cartridge, or its ink level system has read it as empty. For numerous Epson printer models, there`s a way to bypass this built-in ink checking system through a quick cartridge reset. Raise the printer`s top cover and then hold the Ink button.
To reset the product`s EEPROM, hold down the Load/Eject, LF/FF, and Pause buttons while turning on the product. The product beeps once and restores its factory default settings.
How do I reset my product? To reset the printer`s EEPROM, hold down the Load/Eject, LF/FF, and Pause buttons while turning on the printer. The printer beeps once, and restores its factory default settings.
1: Check Printer Power, Cables, and Paper

Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
If the error light is flashing, you cannot clean the print head. Replace the appropriate ink cartridge first. Right-click the printer icon on the taskbar, then select Head Cleaning. Or access the printer software, then click the Utility tab and click the Head Cleaning button.
Reset Button Models

It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.

Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
Common factors include driver problems, software issues, hardware failures and overuse.
A Printer Failure. There is a problem with the printer or ink system. Turn printer off, then on. If problem persists, contact HP. error message displays on the printer control panel, and the printer does not print.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
There are a few things that could be the cause of this problem, including: Empty ink or toner cartridges that need replacing. Ink or toner cartridges that have become dislodged from their proper place. The wrong paper size loaded in the input tray.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct. Make sure your document does not contain blank pages. If your printer software has a Preview option, you can check for blank pages before you print and remove them, if necessary.
Try connecting the product to another router, access point, switch or hub. Try connecting the product to your router, access point, switch, or hub with another Ethernet cable. Try printing from another computer on the network to see if the problem persists.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson Stylus C64 in problems, Help!!!!
ANSWER : a lucky tip – if all else fails and you don’t have a PC instead of a Mac, try what I did on my C63. When the head finished moving and both red lights flashed with a “general error’ message, turn off the printer power supply and physically slide the head from its rest position to the far left of the printer. This seems to re-set the “foreign body” trigger. Turn the power back on, the head slowly moves back to the rest position and hey presto the lights have stopped flashing and the printer works! Sounds clumsy but you have nothing to lose trying it, the cost of repair exceeds the value of a 10 year old printer.

Read Full Q/A … :

Epson LQ 870

Epson RX500 print problems
ANSWER : if you don’t like to install ocr software to your computer, you can try this free online ocr tool

Read Full Q/A … :

Epson LQ 870

epson stylus photo 2000p problems
ANSWER : plz i just receive epson stylus photo 2000p from a friend and the ink light are on nothing is working plz help

Read Full Q/A … :

Epson LQ 870

Weird Problem: Epson R2400 Printer won't power on
ANSWER : I just had exactly the same thing happen. The printer is usually on, but now is off and will not power on. Anybody know what is going on? Is there a fuse blown? Where would that fuse be?

Read Full Q/A … :

Epson LQ 870

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson LQ 870

Red Lines on Epson printer
ANSWER : The problem is apparently a hardware design shortcoming. The intervals of streaking match every second movement of the print head across the page. The evidence is from five 2.000 (+/- .003) inch spaced repetitions of an image (for business cards). The streaks show up at corresponding locations within the images. They may be consistently bright (paper advance defect), or appear somewhat randomly bright or dark (print head suspension worn out).

Read Full Q/A … :

Epson LQ 870

EPSON Stylus NX400 Vista Print Problem
ANSWER : I have the similar issue. The browse button would not open the connection listing the shared printer. How can I fix it? Please respond to this post or contact me via buy essays. Thank you in advance!

Read Full Q/A … :

Epson LQ 870

Epson Stylus Pro 9000 print head problems
ANSWER : Shot in the wind. I have an Epson 9000 Stylus Pro. Have had it for a long time and take extremely good care of it. I run maybe a dozen or two 2X3 posters a year on it. I am very careful about dust and clean the machine often.

Read Full Q/A … :

Epson LQ 870