How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Printer rollers leave unwanted marks on your documents
If the printer rollers leave unwanted marks on your document, use the included cleaning pad to clean the rollers. It may become necessary to clean the printer rollers in the following situations: When you use paper that is not distributed by EPSON.
The Epson Stylus Pro 7600 offers the best and most efficient output for photographers or artists looking to sell their work in quantity, especially at larger print sizes.
The ink levels may be low and you may need to refill the ink. Visually check the ink levels. Also make sure you filled the tanks with the correct colors of ink. After you print, the colors in your printout need time to set as the ink dries.
If the printer is printing black only, the Ink option in the printer driver may be set to Black instead of Color or a setting in the software may be set to print black only. Also, the print head nozzles may be clogged.
Smears and smudges on the paper can be caused by dirt, dust, or toner accumulated on the rollers or transfer belt as it passes through the paper. Cleaning your printer, particularly the rollers, is one of the options for removing black markings from paper.
If your printouts are blurry or smeared, try these solutions: Make sure your paper is not damp, curled, old, or loaded incorrectly in your product. Use a support sheet with special paper, or load special paper one sheet at a time. Place a piece of black paper on the back of the original and copy it again.
Selecting Gloss Optimizer enables you to improve the print quality when printing on a plain paper or photo paper. You can select the following modes: On: Prints with the gloss optimizer ink on the image and text data.
Prints that appear more green are commonly caused by an absence of magenta ink/toner being put to paper by your printer. In addition to your prints looking “greener” you may also notice yellow and blue areas appear almost neon due to the the magenta not being able to give them more realistic tones.
Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. The ink cartridges may be old or low on ink, and you may need to replace them.
The ink levels may be low and you may need to refill the ink. Visually check the ink levels. If you printed when the ink levels were too low to be seen in the ink tank windows, refill the ink tanks to the upper lines and run the Power Cleaning utility. Then run a nozzle check to see if print quality has improved.
Make sure the printer platen is not dirty with ink. Unplug the machine from the AC power outlet. Lift the scanner cover until it locks securely in the open position. Clean the machine`s printer platen(1) and the area around it, wiping off any scattered ink with a soft, dry, lint-free cloth.
Why is so much ink being wasted? Whenever you power up your printer, it goes through a maintenance and cleaning cycle which uses ink. That`s what`s happening when the printer head moves back and forth after your turn it on. This intermittent use can burn through more than half the ink in the cartridge.
If your printer is consuming too much ink during printing, try these solutions: Make sure you selected the correct Media Type setting in the printer driver that matches the paper you loaded in the printer. The amount of ink used during printing is controlled by the Media Type setting.
Epson ink cartridges come with a “Best If Used By” date. This date appears to be approximately two years after the date of manufacture. Epson recommends replacing your installed ink cartridges after six months, whether they`re empty or not, to ensure high-quality prints.
Type of Documents Printed
If you print in mostly black, your black cartridge will naturally run out faster than the color cartridges.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
Gray text and images will typically print with the color cartridge rather then the black cartridge. Your magenta color is running low, resulting in the print appearing green (cyan and yellow) rather than gray (cyan, magenta and yellow).
That means they are black & white, period. If the print is green, then that tint is somehow caused by the printing process. Check what printer profiles you are using, and check that the printer driver doesn`t do a color management step as well. `Double profiling` is a common cause of a strange color cast in prints.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Even if you select Black/Grayscale or Grayscale in the printer software, some color ink is still being used. Epson printers contain a permanent print head that needs to be charged with all colors to work. Even when you are printing black text only, a small amount of color ink is used to keep the print head charged.
Check the ink levels
Sometimes, the printer may not print black ink because it is low or empty. You can check the ink levels on the printer`s display, or by using the software that came with your printer. If the ink level is low, replace the cartridge or refill it according to the manufacturer`s instructions.
There may be several reasons behind the issue, such as empty ink cartridges, Clogged Print Head Nozzles, and Incorrect Print Settings. There may be a fault in the settings of Color Management as well. You can fix it via Running a Nozzle Check or enabling the Print Settings to Color or Replacing the Ink Cartridges.
If your Epson printer is printing out faint images, skipping lines, or is streaking your image with lines, chances are you have a clogged nozzle–a common problem many users have with Epson printers. It`s unavoidable that print heads clog over time as small amounts of ink residue dry up and collect in the nozzles.
The way colours are displayed on a computer monitor is by emitting light through combinations of red, green and blue LEDs (RGB). However, in digital print (eg. a desktop printer or commercial digital press) we generally see colours through light passing through dots of cyan, magenta, yellow and black ink (CMYK).