Epson 2200 printer problem

Check if the cable is properly connected from the computer to your Epson printer. If you are using wifi, check if the devices are connected to the same network. Check for ink levels or paper jams. Flashing ink out light means low ink.

Try connecting the product to your router, access point, switch, or hub with another Ethernet cable. Try printing from another computer on the network to see if the problem persists. If network communication was interrupted while starting Epson Scan, exit Epson Scan, and restart it after a few seconds.

Check your network connection as well as your network devices like your router and modem. View the network connection status of your printer and see if your printer is properly connected to the network. Reconnect or replace your network cable when necessary if your printer is using wired connection.

Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct. Make sure your document does not contain blank pages. If your printer software has a Preview option, you can check for blank pages before you print and remove them, if necessary.

1: Check Printer Power, Cables, and Paper

Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.

Remove and Re-Add Your Printer in Windows

If this happens, go to Settings > Devices > Printers & Scanners, select your printer, and remove it. Then click Add a Printer or Scanner to re-add it to the device list.

Epson Printer Errors

If your printer is displaying an error code or message on the control panel, search for `Error code` on your product`s FAQs tab.

Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.

Click the start button, and then select All Programs > Epson Software > Epson Printer Connection Checker.

If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.

Most printers will stop working when they`re out of paper, ink or toner, or if the unit detects an issue with the ink or toner cartridge. When this occurs, you might receive an error message or notice blinking green or amber lights on your printer.

If your wireless printer isn`t printing, be sure to check your settings. Make sure your Wi-Fi is enabled, and then check to be sure you`re connected to the correct Wi-Fi network. You can often check your connectivity by printing a network configuration sheet by selecting this option from the printer`s display menu.

Select the Start button, then select Settings > Devices > Printers & scanners. Under Add printers & scanners, select Add a printer or scanner. Choose the printer you want, and then select Add Device.

Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.

Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.