epson 1520 head bang

Epson Stylus Color 1520

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. The ink cartridges may be old or low on ink, and you may need to replace them. Your printed colors can never exactly match your on-screen colors.

The ink levels may be low and you may need to refill the ink. Visually check the ink levels. Also make sure you filled the tanks with the correct colors of ink. After you print, the colors in your printout need time to set as the ink dries.

If the nozzle check page does not print satisfactorily, there is a problem with the printer. This could be a clogged ink nozzle or a misaligned print head. See Cleaning the Print Head for details on cleaning the print head. For information on aligning the print head, see Aligning the Print Head.

The print head nozzles may be clogged. Perform a nozzle check to see if the print head nozzles are clogged. Perform a nozzle check, and then clean the print head if any of the print head nozzles are clogged.

There may be several reasons behind the issue, such as empty ink cartridges, Clogged Print Head Nozzles, and Incorrect Print Settings. There may be a fault in the settings of Color Management as well. You can fix it via Running a Nozzle Check or enabling the Print Settings to Color or Replacing the Ink Cartridges.

Ultimately, if you really need to maintain such vibrancy of colors, you must end of with a n-color printing process, CMYK plus additional colorants (bright green and orange, for example).

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson printer can't recognize Epson ink cartridge

ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus Color 1520

Epson Artisan 835 print head cleaning question

ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Epson Stylus Color 1520

Need help for Epson Stylus color 3000 print head?

ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.

Read Full Q/A … :

Epson Stylus Color 1520

What fluid to clean epson head?

ANSWER : There’s only 1 left, so better hurry. http://www.rjettek.com/jiecr-ocp-rinse-epson-blue/

Read Full Q/A … :

Epson Stylus Color 1520

Epson Stylus Pro 9000 print head problems

ANSWER : Shot in the wind. I have an Epson 9000 Stylus Pro. Have had it for a long time and take extremely good care of it. I run maybe a dozen or two 2X3 posters a year on it. I am very careful about dust and clean the machine often.

Read Full Q/A … :

Epson Stylus Color 1520

Epson R3000 Inkjets Clogged

ANSWER : If you haven’t yet destroyed your printer or turned it into a paper weight, check this out:

Read Full Q/A … :

Epson Stylus Color 1520

Epson, sudden cannot recognise cartridges error

ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.

Read Full Q/A … :

Epson Stylus Color 1520

Epson XP600 Paper Jam

ANSWER : hi Russ .did u find solution for ur problem?? i have the same problem ,how did u fix ur printer ..will be glad if u write me on email [email protected]

Read Full Q/A … :

Epson Stylus Color 1520