Epson Stylus Photo 1280

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Turn the printer on at least once every two weeks to automatically clean the print head and prevent the nozzles from clogging. If you do not turn on the printer for a long time, the printer may malfunction.
The primary culprit in the problem of clogged printhead nozzles, whether in Epson printers or otherwise, is air. Air blockages are fairly common, particularly because nozzles are becoming smaller, with every little bit of technological advancement. The next big culprit is, of course, dried ink.
Cleaning out a clogged tube isn`t too hard. Just remove the lines from the printer, soak them in warm water, massage them (especially around the area of the clot), and then use a syringe to suck air from one end of the tube. Ideally, the ink will come through really smoothly when you do this.
Ecotank ink is squirted into a chamber where it remains until it is used. For it to dry out, it would have to evaporate, so it`s unlikely. However, the print heads could still dry out or clog and dry.
You can avoid troublesome nozzle clogs by regularly using your printer to circulate ink and performing manual nozzle checks on at least a weekly basis. If recent events have led to less-frequent printing, then a weekly manual cleaning cycle can help to keep the ink system flushed.
The first step you should take when you think you have a clogged printer printhead is to run the automatic cleaning cycle on your printer. You may want to do this two or three times to see if it clears the clog. The automated cleaning cycle forces extra ink through the print heads to loosen any clogs or blockages.
Remove all printer paper from the tray and try reloading

One of the most common causes of paper jams is that the paper has simply not been loaded correctly into the printer paper feed. With this in mind, remove any paper from the tray in order to check for any jams.

The Power Cleaning utility allows you to replace all of the ink inside the ink tubes. In the following situations, you may need to use this feature to improve the print quality. You printed or performed head cleaning when the ink levels were too low to be seen in the ink tank windows.
Make sure that the printer is turned on and the ink out light is off. Access the Print or Page Setup dialog box and click the Utility icon button, then click the Head Cleaning button. Follow the on-screen instructions. The power light and the ink lights flash while the printer performs the cleaning cycle.
The Epson EcoTank ET-14000 is a great choice for anyone looking for an eco fridnly, professional A3 printer at an affordable price. I often suggest this model due to its impressive print quality and ink economy.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
After a lot of use, your inkjet printer`s printhead nozzles may become blocked with dried ink. The first thing you can do is initiate a cleaning cycle and add drops of 91% isopropyl alcohol if needed. If the steps above does not work, you may need to manually clean the printhead out of the printer.
Your Epson printer may have failed to recognize the new ink cartridge, or its ink level system has read it as empty. For numerous Epson printer models, there`s a way to bypass this built-in ink checking system through a quick cartridge reset. Raise the printer`s top cover and then hold the Ink button.
Make sure your paper meets the specifications for your product. If paper dust builds up on the rollers, they may lose traction and become unable to feed paper properly. Clean the paper guide. If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary.
Right-click the printer icon on the taskbar, then select Nozzle Check.
During the printing process, paper, toner and dust particles can accumulate inside the printer. Over time, this buildup can cause print-quality problems such as toner specks or smearing. This printer has a cleaning mode that can correct and prevent these types of problems.
If you still see white or dark lines or missing nozzles in your printouts, even after cleaning the print head several times, you can run a Power Cleaning. If you do not see improvement after running a Power Cleaning, turn off the product and wait at least 12 hours before running another Power Cleaning.
One of the problems with an inkjet printer is that the cartridges can clog up. This can happen if the nozzle has dried-up ink, from infrequent use, or if it contains air bubbles, which can form after changing cartridges.
The reason behind this problem is that some of the old material remains in the extruder due to the lower temperature needs of the new material. As a result, the old filament will not melt completely, and the residue left behind may cause the nozzle to clog in the long run.
Side-by-Side Comparison

The Canon PIXMA G7020 and the Epson EcoTank ET-15000 are very similar overall. The Canon has slightly better print quality, but it`s slower to print, and unlike the Epson, it only supports up to 8.5″ x 11″ paper, whereas the Epson can print on paper up to 13″ x 19″.

Epson`s new EcoTank pigment ink, DURABrite ET INK, delivers prints that are sharp, clear and water-resistant, even in barcode mode.
How long does Epson EcoTank ink last? An Epson EcoTank has a much higher page yield compared to other regular ink cartridges but laser toner cartridges still have higher page yields.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson R3000 Inkjets Clogged
ANSWER : If you haven’t yet destroyed your printer or turned it into a paper weight, check this out:

Read Full Q/A … :

Epson Stylus Photo 1280

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus Photo 1280

Epson 7880 ink pump sucking ink
ANSWER : Not ink pump, but air pump, to put the ink feed under pressure.

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Stylus PX810FW
ANSWER : You could have air in the tubing/print head.

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Artisan 700 Ink Reset — Any Other Way
ANSWER : I really need the utility but How do I send you a message? I dont see your address

Read Full Q/A … :

Epson Stylus Photo 1280

Epson, sudden cannot recognise cartridges error
ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.

Read Full Q/A … :

Epson Stylus Photo 1280

Epson XP600 Paper Jam
ANSWER : hi Russ .did u find solution for ur problem?? i have the same problem ,how did u fix ur printer ..will be glad if u write me on email [email protected]

Read Full Q/A … :

Epson Stylus Photo 1280