Epson Stylus Photo 1280

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The Epson Stylus® Photo 1280 inkjet printer is the ideal large-format choice. It creates beautiful 8″ x 10″ prints in as fast as 1 minute 50 seconds¹ and inspiring 13″ x 44″ panoramas faster than ever.
Apart from a clogged printhead, other potential culprits could be low or depleted ink cartridges, poor quality paper, or issues with the printer`s internal components.
What sizes are Epson cartridges available in? Epson ink cartridges are offered in either a standard yield or high yield / XL cartridge size. Frequent printer users are better off printing with a high yield cartridge. Because they are filled with more ink, they offer more prints and provide a better a long term value.
Small fragments of sticky label material commonly get torn off and stuck within your printer, collecting dust and causing a jam. Shut the printer off, get a flashlight, and try to see inside. Make sure no label fragments have jammed up your printer before proceeding.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings. Note: This reset does not affect LCD contrast, Print Confirmation, or PictureMate Print Wizard settings.
The orange !

If the printer`s orange exclamation light is lit, it usually means there is a paper jam or the cover is open. Open the printer`s cover and make sure the paper is not jammed. Close the printer`s cover. Turn the printer off, then back on.

The printer will not operate if a black ink cartridge is expended or any cartridge is removed. If a color cartridge is expended, you may be able to continue printing temporarily with black ink. It`s best to always have extra cartridges on hand.
All cartridges must be installed with ink for printing and printer maintenance. For print quality, some ink remains in replaced cartridges. Designed for EPSON cartridges only: Other brands of ink supplies are not compatible and, if described as compatible, may not function properly or continuously.
8.5 x 11 or letter size paper: 8.5 x 11 is the standard size for most printers. It`s also the size used for a wide range of standard documents, including magazines, catalogs, letters, and forms.
EPSON recommends using plain photocopy or bond papers for your everyday printing. For digital photos that look and feel like traditional photos, choose one of the EPSON Premium Photo papers.
The most popular formats of the traditional sizes are the Letter (8.5 × 11 inches), Legal (8.5 × 14 inches) and Tabloid (11 × 17 inches) formats. You more than likely use these formats in your everyday life. Letter is the standard for business and academic documents.
A piece of paper stuck in the paper tray or inside the printer can create a paper jam. Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer.
If the paper is even slightly askew, the rollers will pick it up a little crooked, and — guess what — the crooked sheet will immediately get jammed. So even though there`s no paper stuck when you start printing, the loose paper guides are ensuring that a sheet gets jammed whenever the printer starts doing its thing.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!
Turn the printer on at least once every two weeks to automatically clean the print head and prevent the nozzles from clogging. If you do not turn on the printer for a long time, the printer may malfunction.
The primary culprit in the problem of clogged printhead nozzles, whether in Epson printers or otherwise, is air. Air blockages are fairly common, particularly because nozzles are becoming smaller, with every little bit of technological advancement. The next big culprit is, of course, dried ink.
A compact six-colour A3+ printer for cost-conscious homes and offices, the L1800 prints a 10x15cm photo in around 45 seconds1. Its high-capacity ink tank system allows it to print 1,500 10x15cm photos2 without a refill.
A piece of paper stuck in the paper tray or inside the printer can create a paper jam. Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
This error occurs if the firmware update procedure is interrupted, e.g. an accidental powering off of the product, cables being removed, or the installation being canceled. To recover from this error, Epson will instruct customers to update their printers with the latest version of the firmware.
While troubleshooting your Epson printer, you may need to completely reset the device. A factory reset will return your printer to its out of the box settings.
Click the start button, and then select All Programs > Epson Software > Epson Printer Connection Checker.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Paper Jam and carriage jam code when nothing is jammed
ANSWER : Did you try cleaning the encoder strip that runs through the cartridge assy.? Use Window Cleaner on a paper towel. Also, check inside on the right. I’ve seen a lot of times where there is a folded up scrap of paper that stops the carriage from going all the way to the right.

Read Full Q/A … :

Epson Stylus Photo 1280

Epson R2400 printer paper jam reports all the time
ANSWER : I would like to second this question. I have the same issue with the media not being detected by the printer. The forwarding wheels squeak more than I would expect. I wonder where the sensor is that it uses to decide if there is paper or not. If I can figure it out I will post the saga here.

Read Full Q/A … :

Epson Stylus Photo 1280

Epson XP600 Paper Jam
ANSWER : hi Russ .did u find solution for ur problem?? i have the same problem ,how did u fix ur printer ..will be glad if u write me on email [email protected]

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Stylus Photo T60 paper jam
ANSWER : paper jam

Read Full Q/A … :

Epson Stylus Photo 1280

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Workforce 600 won't clear paper jam message
ANSWER : In my case, I have a WorkForce 7620 having this problem too, and there is white post on a sliding plastic bar which is the reason of my sorrow. I cannot move it, and it is getting me so desperate, because it makes the print head get stuck. I try to push it down to get the print head to the right position. Then, when I turn on the printer, the print head cannot move. The bar post don’t go down to free the print head and all I got all the time is an error code 0x69 on the screen. I see no paper jam there. Any suggestion, please?

Read Full Q/A … :

Epson Stylus Photo 1280

message error: ADF paper jam
ANSWER : There is a thin plastic arm that the paper pushes on. It is spring loaded. If it doesn’t return and unblock the sensor after the paper passes it, you get the paper jam warning. I’m guessing that is the spring you are referring to.

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Stylus PX810FW
ANSWER : You could have air in the tubing/print head.

Read Full Q/A … :

Epson Stylus Photo 1280