Epson M 180

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If you just replaced an ink cartridge and the power light is still flashing after 3 minutes, the cartridge may be installed incorrectly. Reinstall the ink cartridge. Paper is jammed in the product. Remove the jammed paper, and press the B&W copy button or the color copy button to clear the error.
If an error message appears indicating the printer`s ink pads are nearing the end of their service life, contact Epson support to replace them. The message will be displayed at regular intervals until the ink pads are replaced.
There are a number of porous pads in the printer that collect, distribute, and contain ink that is not used on printed pages. Ink is collected by these pads during the initial setup of the product, during cleaning cycles, and when printing borderless photographs.
Some parts of the printer are broken, or there`s an internal error with the device. You need to restart your printer if you notice the `Resume` light and the Power light blinking together. There`s an improper connection. A flashing `Resume` light can also indicate a paper jam.
It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
If the pad is heavily saturated with ink or is disintegrating, it`s time to replace it. If the pad is only partially full, you may be able to reset the waste ink counter instead. Before replacing the waste ink pad, it`s essential to clean the area around the pad to avoid ink spills and ensure a clean work environment.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
The reset key is a single use key and once used cannot be used again. All EPSON printers have inbuilt counters that count up the number of pages a printer produces, the number of head cleans executed and various other attributes. Once a critical level is reached the printer will enter its service mode.
Hey, you can reset Epson ink cartridge without resetter! As shown above, you can reset Epson chips by pressing and holding the button above the chip with a bent paper clip for 10 seconds.
Hey, you can reset Epson ink cartridge without resetter! As shown above, you can reset Epson chips by pressing and holding the button above the chip with a bent paper clip for 10 seconds.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson Stylus C90 (Red Light Continuously Blinks)
ANSWER : It looks like General Error occurs. Check for foreign objects inside the printer which may block the movement of printhead carriage, paper feed, etc.

Read Full Q/A … :

Epson M 180

waste ink pad replacement
ANSWER : examcollection C9020-461 Very interesting blog. A lot of blogs I see these days don’t really provide anything that I’m interested in, but I’m most definitely interested in this one. Just thought that I would post and let you know about examcollection C9020-970

Read Full Q/A … :

Epson M 180

epson artisan 800 ink pad warning
ANSWER : how do i override the error

Read Full Q/A … :

Epson M 180

Epson 2400 waste ink tank full?
ANSWER : The “waste tank” is actually just a foam sponge cut to fit space under the print head travel. If you’re careful you can get it out with a pair of long ! tweezers, rinse it in water and dry it. It may come out in pieces…assemble them as a template to make a new one or try to buy a new one on- line. Before putting it back in clean the whole region under the head travel as best you can with plenty of paper towels. This is a messy job, so prevention will save a lot of cleanup. Good luck.

Read Full Q/A … :

Epson M 180

Epson Stylus Photo R230(2 red indicator blinking)
ANSWER : 2 red indicator blinking

Read Full Q/A … :

Epson M 180

replace ink pads
ANSWER : I purchase a repair for ink pads a while ago. The printer is again sending an error message to contact Epson suport

Read Full Q/A … :

Epson M 180

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :

Epson M 180

Epson Artisan 800 Blinking Menu
ANSWER : I actually managed to fix the error, and I literally have found ZERO websites that have the answer.

Read Full Q/A … :

Epson M 180