Epson Stylus Photo 1270

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If you find that the printed image is unexpectedly faint or dots in the printed image are missing, you may be able to solve these problems by cleaning the print head, which ensures that the nozzles are delivering ink properly.
Print head cleaning uses both color and black ink. To avoid wasting ink, clean the print head only if print quality declines (for example, if the printout is blurry or the color is incorrect or missing).
Access the Print or Page Setup dialog box. Click the Utility icon button, then click the Auto Nozzle Check and Cleaning button. Follow the on-screen instructions. The power light flashes while the printer performs the cleaning cycle.
The print head cleaning function allows you to clear up clogged print head nozzle. Perform print head cleaning if printing is faint or a specific color fails to print, even though there is enough ink.
In the majority of cases, printers` self-cleaning mechanisms clean blocked printer heads by flushing the nozzles with air. The air works to dislodge dry ink inside the cartridge channels and also push it out. The intensity of the self-cleaning process of printers is usually not very strong.
Although different brands of cleaning solution will slightly vary when it comes to ingredients and ingredient ratios, they are largely based on the same three components: Distilled water. Isopropyl alcohol. Detergent.
What Is a Print Head Cleaning? A print head cleaning is exactly what it sounds like; it is simply the process of removing excess ink from the cartridge or printhead to improve the flow. Printhead cleaning is often compared to car maintenance.
Dried Ink Buildup on the Printhead

If the print cleaning cycle doesn`t work, dried ink may be the culprit. Take the printhead out and wipe the nozzles clean to remove any buildup. Depending on the model of your printer, this may be difficult—some printheads are harder to remove than others.

The product prints a nozzle check pattern. Check the printed pattern to see if there are gaps in the lines. If there are no gaps, the print head is clean and you can continue printing. If there are gaps or the pattern is faint, clean the print head.
If the hot water soak did not unclog the print head, place the cartridge printer head in isopropyl alcohol and allow it to soak overnight. Use a damp paper towel to wipe off the print head area and dry carefully.
Press and hold the power button and the help button at the same time until the Power Cleaning screen appears on the LCD screen. Follow the on-screen instructions to run the Power Cleaning. When the Power Cleaning is finished, run a nozzle check.
You may need to clean the print head up to 4 times. You can also turn off your Epson printer and wait at least 6 hours. Then try printing again.
Run a nozzle check to confirm that the print head is clean. You may need to clean the print head up to 4 times. You can also turn off your Epson printer and wait at least 6 hours. Then try printing again.
Nozzle Check

Check the nozzles if you notice print quality has declined and after cleaning to confirm that the print head nozzles have been cleared. If the nozzle check indicates the print head needs cleaning, you can access the Head Cleaning utility directly from the Nozzle Check utility.

If you`re still experiencing quality issues or printhead errors, then there may be other problems at play. Before taking any other actions, it`s recommended that you clean the printhead and ink cartridges four or five more times.
Nozzle Check

Check the nozzles if you notice print quality has declined and after cleaning to confirm that the print head nozzles have been cleared. If the nozzle check indicates the print head needs cleaning, you can access the Head Cleaning utility directly from the Nozzle Check utility.

If you`re still experiencing quality issues or printhead errors, then there may be other problems at play. Before taking any other actions, it`s recommended that you clean the printhead and ink cartridges four or five more times.
What Is a Print Head Cleaning? A print head cleaning is exactly what it sounds like; it is simply the process of removing excess ink from the cartridge or printhead to improve the flow. Printhead cleaning is often compared to car maintenance.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Need help for cleaning epson r300, have a kit
ANSWER : Don’t worry about the paper towel. Keep the heads as far to the right as you can and the fluid will just go into the waste sponge underneath. There’s nothing you can damage with the fluid. I wouldn’t worry about the pad that got torn. Just insert the syringe in the nozzle and gently push the fluid down into the heads. This site sold tens of thousands of those kits and I guess the instructions were pretty good because there was never a single complaint.

Read Full Q/A … :

Epson Stylus Photo 1270

Epson 9800 dmzcompute needs help
ANSWER : On one of my epsons when i went to the menu and widened the platen gap it seemed to help the paper jam. Try that as well. Also they say cleaning the encoder strip & also making sure the encoder strip is clicked into place all the way. Hope some of this helps.

Read Full Q/A … :

Epson Stylus Photo 1270

Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.

Read Full Q/A … :

Epson Stylus Photo 1270

Epson Stylus C64 in problems, Help!!!!
ANSWER : a lucky tip – if all else fails and you don’t have a PC instead of a Mac, try what I did on my C63. When the head finished moving and both red lights flashed with a “general error’ message, turn off the printer power supply and physically slide the head from its rest position to the far left of the printer. This seems to re-set the “foreign body” trigger. Turn the power back on, the head slowly moves back to the rest position and hey presto the lights have stopped flashing and the printer works! Sounds clumsy but you have nothing to lose trying it, the cost of repair exceeds the value of a 10 year old printer.

Read Full Q/A … :

Epson Stylus Photo 1270

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Epson Stylus Photo 1270

What fluid to clean epson head?
ANSWER : There’s only 1 left, so better hurry. http://www.rjettek.com/jiecr-ocp-rinse-epson-blue/

Read Full Q/A … :

Epson Stylus Photo 1270

HELP Epson Sylus 1400
ANSWER : In print dialog box, try setting “Color Matching” to “Epson Color Controls”, then in “Print Settings” choose “Grayscale” instead of “Color”. I also recommend choosing “Quality” over “Speed”. This has worked for me on Mac OS.

Read Full Q/A … :

Epson Stylus Photo 1270

Epson Stylus Pro 9800 Service / Repair Materials
ANSWER : service call error 00010005 . how to solve?

Read Full Q/A … :

Epson Stylus Photo 1270