Epson Stylus Photo 1200

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The first time a ink cartridge is installed in the printer, it will take 7-9 minutes to charge the ink system and initialize the printer. While the ink is charging the power light will flash. NEVER turn off the printer while the power light is flashing.
As a rule of thumb, to achieve photo quality print, you will need to use an image resolution of 300 pixels per inch. We write this as 300 DPI and means that in each inch of your print there will be 300 pixels.
Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. Align the print head. Use genuine Epson ink packs and make sure the ink packs have not expired.
Because the modern print head has to print at very high resolutions there are literally tens of thousands of small holes from which the ink is sprayed from to produce the high quality images which we all demand.
Epson printers are equipped with a status monitor utility that check the ink grade in the printer. This can be accessed from the printer drive, which can be reached from the start menu or home screen dashboard.
Click Print or Page Setup on the File menu of your application. The Print dialog box appears. Click the Utility icon button, then click the EPSON StatusMonitor button in the Utility dialog box. A graphic displaying the amount of ink remaining will appear.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Reset Button Models

It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.

What resolution should photos be for printing? What should DPI (or PPI) be for printing high-quality artwork? In many cases, the best resolution for printing is 300 PPI. At 300 pixels per inch (which roughly translates to 300 DPI, or dots per inch, on a printing press), an image will appear sharp and crisp.
The higher the dpi, the better the print quality or resolution because more ink droplets are filling up that one-inch space. Inkjet printers typically have a range between 300-720 DPI, while laser printers range from 600-2,400 DPI. If you are printing text or business graphics, don`t worry about DPI.
If you notice that your print quality is uneven, too light, too dark, or there are vertical or horizontal lines in the print (banding), try these solutions: Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. Align the print head.
Click Advanced, then click More Settings. The following dialog box appears. Choose Color or Black as the Color setting. Choose desired printing resolution from Fast (300 dpi) or Fine (600 dpi).
If you notice that your print quality is uneven, too light, too dark, or there are vertical or horizontal lines in the print (banding), try these solutions: Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. Align the print head.
Click Advanced, then click More Settings. The following dialog box appears. Choose Color or Black as the Color setting. Choose desired printing resolution from Fast (300 dpi) or Fine (600 dpi).
For the highest quality photo prints, we generally recommend 300 DPI. (This is what you`ll hear referred to as a “giclée” print sometimes.) However, most images will still look good and avoid pixelation at 150 DPI or above. Simply put: Don`t blow up photos to more than double what the max size was at full quality.
True Photographic Print Quality.

Powered by Epson Micro Piezo Variable Sized Droplet Technology – EcoTank Photo uses our 6‑Color Claria® ET with photographic dye inks to produce exceptional color and black & white photographic print quality.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus Photo 1200

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :

Epson Stylus Photo 1200

Epson Stylus PX810FW
ANSWER : You could have air in the tubing/print head.

Read Full Q/A … :

Epson Stylus Photo 1200

Epson R3000 Inkjets Clogged
ANSWER : If you haven’t yet destroyed your printer or turned it into a paper weight, check this out:

Read Full Q/A … :

Epson Stylus Photo 1200

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Epson Stylus Photo 1200

Epson Artisan 700 Ink Reset — Any Other Way
ANSWER : I really need the utility but How do I send you a message? I dont see your address

Read Full Q/A … :

Epson Stylus Photo 1200

Epson, sudden cannot recognise cartridges error
ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.

Read Full Q/A … :

Epson Stylus Photo 1200

Epson XP600 Paper Jam
ANSWER : hi Russ .did u find solution for ur problem?? i have the same problem ,how did u fix ur printer ..will be glad if u write me on email [email protected]

Read Full Q/A … :

Epson Stylus Photo 1200