How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Make sure the USB cable is connected securely at both ends and meets the requirements. Run a printer check. If the test page prints, make sure your software is installed correctly. Make sure the printer cover is closed.
Select Print Settings from the pop-up menu. Select plain papers or Envelope as the Media Type setting. Select the Grayscale check box. Click Print to close the Print dialog box.
If your Epson printer is printing out faint images, skipping lines, or is streaking your image with lines, chances are you have a clogged nozzle–a common problem many users have with Epson printers. It`s unavoidable that print heads clog over time as small amounts of ink residue dry up and collect in the nozzles.
Method 1 – Bypassng Ink Cartridge on Epson Printer
After opening the lid, hold the ink button down. When you find the ink holer is moving to its position, then open the cartridge`s lid which is having no ink. Close it again without removing the cartridge. Close the lid and start to print.
If your wireless printer isn`t printing, be sure to check your settings. Make sure your Wi-Fi is enabled, and then check to be sure you`re connected to the correct Wi-Fi network. You can often check your connectivity by printing a network configuration sheet by selecting this option from the printer`s display menu.
Use Epson Printer Connection Checker to check the connection status for the computer and the printer. You may be able to solve the problem depending on the results of the check.
1: Check Printer Power, Cables, and Paper
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
The ink cartridges may not have been installed using the correct procedure, or they may not be seated correctly. Follow the instructions below to correctly install and reseat the ink cartridges. Note: This product is designed to use only genuine Epson-brand ink cartridges.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Prints blank pages, won't print from computer
Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.
Kyocera M6026cdn – Somewhat random white blotches on printed page
Looking at that photo, it’s definitely nothing to do with electronics, high voltage or the laser assembly. I noticed you are using compatibles. I’ve seen a lot of those bad right out of the box.
when printing front and back, the front will print well but the back will fade
It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?
Black line printing in the middle of the page from top to bottom
Take out the toner cartridge and look at the drum. If you see the line, replace the cartridge. If you don’t, then you need to replace the fuser assembly.
HP LaserJet 2200D won't print configuration page
Find someone with a HP LaserJet 4100 and you can configure the card to the IP you want:
HP Officejet 860 printer printing blank pages
First check the exact ink levels, replace if any one are low or empty.
incomplete printing of page
the printer for above mentioned problem is an Epson; product name = WF-254
printing blank pages
You can’t let an inkjet printer sit that long. Try flushing the heads. Take out all the ink tanks and to the right of the assy. you will see a plastic lever. Lift it and it will release the heads. Take it to the sink and using hot running water, flush it from top and bottom several times. Then blot it dry and reinstall.