Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
The ink cartridges are connected with Epson Printer Error 000033 or 43. If there are problems with the Epson Printer`s ink cartridges, it will display a numeric code, either 000043 or 00033. You won`t be able to take proper printouts unless you follow the troubleshooting advice if these difficulties occur.
Find the button marked Pause/Reset on the row of buttons on the control panel. Press and hold the button down for at least three seconds to clear the print job and reset your printer so you can start printing again. Try printing again. Repeat the process one time if you still experience printer errors.
There is a possibility that it didn`t properly click into the designated slot. If this is the case, you should lift the cover and double-check in order to verify that the cartridge is clicked into place. Otherwise, it would not be possible for the printer to detect it.
Epson Printer Errors

If your printer is displaying an error code or message on the control panel, search for `Error code` on your product`s FAQs tab.

The “code 43” issue usually shows a problem with the GPU drivers or the virtual machine`s settings. This error can arise due to a variety of factors, such as incompatible drivers, faulty device setup, or conflicts with other devices or drivers inside the virtual system.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
The common causes of “General Error” are: Something in the path of the printhead (like bits of paper or something that`s been dropped in) Incompatible cartridges (Printer can`t/won`t recognise them) Autohead Cleaning & insufficient ink in cartridge(s) [PX/TX700W <-> Artisan 837 models]
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
The only permanent solution to the 0x0000011B error is to install the latest Windows Update which fixes the issue. For now, you can try uninstalling the update or disabling the problematic security feature from the Registry. Other workarounds include installing the printer manually.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Press the right or left arrow button to highlight the ink tank you refilled and press the OK button to select it. Repeat for each ink tank color you refilled. Press the start button to reset the ink levels, then press the OK button when the reset is complete.
If you disable your printer`s memory chip from collecting your printer usage information, you can continue using your printer even if the toner or ink is finished. So you want to inspect your printer`s ink level at interval by removing it to avoid your ink running out!
Remove all of the new cartridges you had installed and re-install the old (empty) cartridges that worked. Restart the printer, this should remove the not recognised error (and tell you some are empty).
Your Epson printer may have failed to recognize the new ink cartridge, or its ink level system has read it as empty. For numerous Epson printer models, there`s a way to bypass this built-in ink checking system through a quick cartridge reset. Raise the printer`s top cover and then hold the Ink button.
To remove dust or smudges, gently wipe the obstacle sensor glass with lens-cleaning paper. To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the obstacle sensor glass. Warning: Do not use a lens cleaner that contains flammable gas.
Try this: uninstall every nvidia software and repeat all the steps but uncheck geforce experience. Try also 430.97. Check in win+r “dxdiag” display tab if the driver version is the one you installed.
Factory Reset Epson Printer

Firstly, simply Turn your Epson printer device off. Now, find the reset button on the back of your Epson printer near the ethernet port. Press and hold your Epson printer`s reset button for a few seconds.

Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
Factory Reset Epson Printer

Firstly, simply Turn your Epson printer device off. Now, find the reset button on the back of your Epson printer near the ethernet port. Press and hold your Epson printer`s reset button for a few seconds.

Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
Factory Reset Epson Printer

Firstly, simply Turn your Epson printer device off. Now, find the reset button on the back of your Epson printer near the ethernet port. Press and hold your Epson printer`s reset button for a few seconds.

The common causes of “General Error” are: Something in the path of the printhead (like bits of paper or something that`s been dropped in) Incompatible cartridges (Printer can`t/won`t recognise them) Autohead Cleaning & insufficient ink in cartridge(s) [PX/TX700W <-> Artisan 837 models]

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson Stylus sx130 Printer does not power on…
ANSWER : I have had the same problem with Epson px660. I have replaced the main board twice with the same problem recurring after printing many copies of documents..there are some transistors at the back of the main board which when removed the printer will power on but will not recognize the cartridge..so I’m still wondering of the power supply is short circuiting the main board…a

Read Full Q/A … :
Unknown Printer

Epson Stylus Photo R230(2 red indicator blinking)
ANSWER : 2 red indicator blinking

Read Full Q/A … :
Unknown Printer

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :
Unknown Printer

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :
Unknown Printer

Printer error Oxc18a0201
ANSWER : Have no idea what model you have, but try this forum post or search through the site using your model and error.

Read Full Q/A … :
Unknown Printer

canon printer error
ANSWER : Here are the procedure to fix Canon smartbase MP730 printer error ##334

Read Full Q/A … :
Unknown Printer

printer error fix
ANSWER : Epson 2540

Read Full Q/A … :
Unknown Printer

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :
Unknown Printer