Canon ImageRunner C3170C
hey guys i got a suggestion from someone that error code has to do with the fuser.i ordered for a new fuser and replaced.the issue is this same error still come up.i have even clared the error code from the bios clare option..i.e add func,2 and 8,add func.copier,function,clear,error,ok.off/on.
Experienced technical support provide their insights in answering this question :
The advice on this thread should work for your model as well.
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The E 0 4 error is an indication that your PIXMA TS3122 does not recognize one of the ink cartridges installed. The light should be on by either BK or CL (or both). Whichever light is lit, please replace that cartridge (or both).
If the paper tears and you cannot remove the jammed paper from the paper output slot, open the paper output cover to remove the paper. Reload the paper, and press the Stop / Reset button on the machine. If you turned off the machine in step 1, all print jobs in the queue are canceled. Reprint if necessary.
#099. The job was cancelled. Perform the job again. An error occurred because the main power switch was turned OFF while executing a job.
Error code E04 means that the FINE cartridge in your printer is not installed correctly. To remove the cartridges you will need to push the output tray back in before opening the cover. Once cartridges have been removed they can be re-install them by firmly pushing them back in until they click into place.
During a print job, the printer stops feeding pages, an E4 error displays and the Resume light blinks. This indicates that paper might be jammed inside the printer. Note: Paper jams can be real or false.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
An E0 error indicates an unusable cartridge. This condition occurs when at least one ink cartridge needs attention, is faulty, incorrect, missing, damaged, or incompatible. Reseat both ink cartridges, clean the ink cartridge contacts, restart the printer, and replace one or both ink cartridges if necessary.
The machine is unable to drain the water away
Should the error code E3 appears it is warning that the machine is not draining. You can easily fix this problem by removing any blockages from the drain pump situated at the front of the machine for easy access.
If you encounter the E02 or E03 error, this is because the printer cable is too tight and the printer door cannot be properly closed.
Solution. The ECM (Error Correction Mode) is a function for detecting and correcting errors during fax communication. Using the ECM function can diminish receive errors even over poor connections. The ECM function is available only when the settings for the sender`s and recipient`s machines are enabled.
The default setting for both the System Manager ID and System PIN is `7654321`. It is recommended that you change both the System Manager ID and System PIN.
Resolution: Check to ensure that the motor cables are securely connected to the controller. If any of the cables/connectors appear loose, completely power off and unplug the treadmill before unplugging and reattaching the cables. Once all cables have been completely reattached, plug in and turn on the treadmill.
E04 – The printer cartridge is not installed properly. E05 – The printer cartridge cannot be recognised. E08 – The ink absorber is nearly full. E13 – The printer cartridges may be empty.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue