Okidata OkiLaser 820
is there a way to reset de imag drum of oki c822

How to Identify and Fix Common printer Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

1 Press and release the SEL key to take the printer off-line. The SEL light will be out. 2 Then, press and hold the SHIFT key and press the RESET (CHARACTER PITCH) key. 3 The printer is reset.
“DRUM LIFE” or “REPLACE DRUM” is a rough indicator that the image drum cartridge has reached the end of its life. If there are no problems with print quality even if this message appears, continue to use until there is no toner left. When out of toner, replace the image drum cartridge and toner cartridge together.
What is the drum unit? The drum unit transfers the toner to the paper. The laser printer puts the toner on the roller called “The photosensitive drum” inside the drum unit, and then prints letters and images by fixing toner to the paper by heat and pressure.
The message Drum End Soon indicates the drum unit will need to be replaced soon. Even when the LCD or the status monitor displays the message Drum End Soon, you can still continue to print.
Okidata (also known as OKI) is a leading maker of dot matrix printers, and business laser printers.
Drum Error typically appears when the corona wire on the drum unit needs to be cleaned or when the drum unit needs to be replaced. If you replaced the drum and the message appeared or continued to appear immediately after installing the replacement drum, click here. 1. Clean the corona wire inside the drum unit.
There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used, number of pages per print job and so on. Under ideal conditions, the average drum life is estimated at approximately 12,000 pages.
Reset the transfer belt unit counter: a. Press ON LINE, then press and hold MENU 1/Menu 2 until COLOR REG. ADJUST appears on the display.
Why do I need a drum? Without a drum unit, the toner powder in the cartridge cannot be transferred onto the page. The two parts work together to create a print! You can`t have one without the other and expect the printer to work properly.
Turn the printer on while holding the RECOVER/RESET button until drum reset appears. Press ENTER. Drum counter is now reset.
Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and press «OK». Input the factory default admin password. Press the scroll button ▲ or ▼ on the operator panel several times to select [Change Password], and press «OK». Enter a new password and press «OK».
You stick the chip on to the drum when the printer is turned off, then you turn on the power, wait a few minutes for the printer to calibrate and it`s ready! Your drum will be reset.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

oki c511 drum reset, toner reset, turkey chip reset
ANSWER : If you switch off toner control, you should keep an eye on your prints, and we aware of ink quality, so filling colours as they’re emptying. Nevertheless, it’s an small disturb for the a,ount of money you’re saving ¿isn’t it?

Read Full Q/A … :

Okidata OkiLaser 820

reset toners and image drum life
ANSWER : They both have chips that need to be replaced. There are videos on YouTube that show how to refill the toners and how to replace the chips.

Read Full Q/A … :

Okidata OkiLaser 820

Drum reset
ANSWER : This forum thread covers the reset procedure

Read Full Q/A … :

Okidata OkiLaser 820

Brother DCP 7030 Drum Counter reset solution
ANSWER : can you help me mam. it doesnt work in my printer, I try several times, but the same noted toner life ends

Read Full Q/A … :

Okidata OkiLaser 820

ip4200 INK TANK RESET and WASTE TANK RESET
ANSWER : Different cartridges, notwithstanding, don’t have a ‘fill gap’ so you’ll have to make one yourself. Our refill units for these sorts of cartridges accompany a smolder apparatus which is utilized to blaze (really dissolve) a fill opening in the cartridge . Our refill guidelines will demonstrate you precisely where to make the fill opening (you would prefer not to make it in the wrong spot). A blaze device come standard in all refill packs for cartridges without processing plant made fill openings. if you want to get proper detailed information then call us at 1-888-924-2961for more information regarding canon printer support.

Read Full Q/A … :

Okidata OkiLaser 820

RESET OKIDATA TONER DRUM
ANSWER : Hi guys

Read Full Q/A … :

Okidata OkiLaser 820

RESET OKIDATA TONER DRUM
ANSWER : HI there, oki image drums contain a fuse. You can reset them if they are working/printing ok by replacing the fuse. Hope this helps. The fuse is located inside the unit so is a bit fiddly.

Read Full Q/A … :

Okidata OkiLaser 820

HP 2840 All-in-one ,image drum counter reset
ANSWER : Hi, My HP 2840 is showing replace supplies on all but black , to print color all I have to do is send print command before the printer shows ready and it will print full color , also the windows test print works at any time ? It’s a pain but it works !

Read Full Q/A … :

Okidata OkiLaser 820