Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If your printer won`t print, a print job has stopped unexpectedly, or you received a “carriage jam” error, your printer carriage is likely jammed. These jams occur when the carriage holding the ink cartridges stalls in the printer. Carriage jams sometimes occur after a paper jam.
The carriage of a printer is the assembly that holds the ink cartridges and slides back and forth to transfer ink onto printer paper. Paper jams can sometimes lead to carriage jams, especially after printing on thicker paper like an envelope.
Make sure you don`t overload the tray. A good way to stop the printer becoming jammed, is to fan the paper before you put it in the tray as this will shake out any dust and reduce static, which are two major causes of paper jams. Another way to avoid a printer paper jam is to keep your machine clean.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
You can continue to print with one or more empty cartridges, but HP recommends replacing them as soon as possible to avoid printhead damage.
Clean the Cartridge Contacts: one of the most common reasons you might get a cartridge problem error when your cartridges are new and full is the contacts on the cartridge might be dirty or otherwise obscured from making good contact with the electronics in the printer head carriage.
Your printer may not recognize the new ink cartridge, or the ink counter may read it as empty. Many printers have a cartridge reset feature that forces the machine to recognize the cartridge as new.
There are two main types of printer drivers: Printer Command Language (PCL), and PostScript (PS).
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
Updated: 02/07/2022 by Computer Hope. A paper jam is when paper or other printed material gets stuck or lodged in a printer and cannot eject. When this occurs, the printer does not function properly until the paper is manually removed.
Most printers will stop working when they`re out of paper, ink or toner, or if the unit detects an issue with the ink or toner cartridge. When this occurs, you might receive an error message or notice blinking green or amber lights on your printer.
A mistake in anything that`s printed is a misprint. You might also call it a typographical error or typo.
Turn off the printer, and then unplug the power cord from the electrical outlet. Remove any paper from the input tray. Open the rear access door, and then clean the paper feed rollers with a lint-free cloth lightly moistened with filtered water. Wait 10 minutes for the rollers to dry.
Can you print with one or two empty ink cartridges? The quick answer is: Yes, you can (if you own a printer model that allows it) — but you shouldn`t keep printing with an empty cartridge for too long.
When color ink is expended and black ink still remains, you can continue printing for a short time using only black ink. However, you should replace the expended ink cartridge(s) as soon as possible. See the following section to continue printing temporarily with black ink.
Select your printer then press “Manage” Select “Printing Preferences” Click on the “Maintenance” tab on the far right. From there you should be able to see ink levels for your selected printer.
Chances are you suspect a faulty ink cartridge due to your print quality declining. Streaks, smears and stripes on your printout are all signs of a bad cartridge, as is a lack of a particular color or a color appearing very faint. Sometimes the printer refuses to print if a cartridge is faulty.
The chip is programmed to automatically reset when the cartridge reads empty in the printer, is removed, refilled with ink, and reinstalled. Upon reinserting the cartridge, the ink level will be reset to full. This style chip can NOT be manually reset.
The chip resetter tool is a self-contained unit that contacts the cartridge chip to get it to its electronic full setting, telling the printer it is full of ink and ready to print. It is generally used when re-inking a cartridge, because the cartridges must be removed from the printer to complete the process.
In Windows, go to Printer Properties > Maintenance > Clean Heads > OK and follow on-screen prompts. On a Mac, check the Applications folder for a Utility application for the printer. To manually clean the printer, remove printheads and use equal parts water and isopropyl alcohol to clean them.
Go to HP Software and Driver Downloads, and then enter your printer model. Select Firmware from the list of drivers, click Download next to the update, and then follow the instructions. Note: If you do not see a firmware option, there are no firmware updates for your printer.
Printer memory can range from 4MB up to 128MB, which allows for more complicated tasks that require additional data processing. For black and white laser printers, the memory range will be between 32 MB to 64 MB. On the other hand, color laser printer memory requires 128MB.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Red Light – Please help!
ANSWER : Here is the vid:

Read Full Q/A … :
Unknown Printer

Unusual feed problem
ANSWER : Springs don’t wear out. All the solenoid issues I’ve dealt with was because the release plate stuck to some deteriorated foam on the solenoid body.

Read Full Q/A … :
Unknown Printer

CANON P200- ERROR 5100 PLEASE HELP!
ANSWER : Read this for solutions http://www.mytechtime.com/2011/10/canon-error-5100-how-to-fix.html

Read Full Q/A … :
Unknown Printer

Paper jam in front of print head. HELP URGENT Please
ANSWER : I am 99% sure you don’t have a problem with a sensor. Having no idea what you do in the cleaning process, and not being able to look at the printer, there is no way to help or advise you.

Read Full Q/A … :
Unknown Printer

Epson Stylus C64 in problems, Help!!!!
ANSWER : a lucky tip – if all else fails and you don’t have a PC instead of a Mac, try what I did on my C63. When the head finished moving and both red lights flashed with a “general error’ message, turn off the printer power supply and physically slide the head from its rest position to the far left of the printer. This seems to re-set the “foreign body” trigger. Turn the power back on, the head slowly moves back to the rest position and hey presto the lights have stopped flashing and the printer works! Sounds clumsy but you have nothing to lose trying it, the cost of repair exceeds the value of a 10 year old printer.

Read Full Q/A … :
Unknown Printer

epson L800 – print head carriage problem
ANSWER : epson l800printer head complaint start the printer first 4or 5 prints coming full megenta daily same problem what is the problem

Read Full Q/A … :
Unknown Printer

Please help! Replace toner message keeps coming up! Brother DCM-1510
ANSWER : It’s a laser printer, there is no ink. You are going about it the wrong way. Watch this video. You can just skip the first part and go to 1:30 into the video. http://www.dailymotion.com/video/x1yakq1_how-to-refill-and-reset-brother-hl-1110-hl-1112-hl-1112a-dcp-1510-dcp-1512e-mfc-1810_tech

Read Full Q/A … :
Unknown Printer

problem in driver
ANSWER : we offer Assignment Help Australia for you do not waste more time to searching others just click us.

Read Full Q/A … :
Unknown Printer