Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

HP Smart app might display the “Printer status unknown” error message if your printer is idle or offline. If your printer goes into sleep or standby mode after a period of inactivity, press the power button to “wake” it.
Check Cables and Printer USB Ports

Check all cable connections (including the power cord) on the printer side. If the printer does have power and you`ve properly connected the communication cable, but the printer is still not recognized, try switching to a different USB port on the PC.

Status unknown means a circumstance where samples were scheduled to be taken by the regional water quality control plant and were not, samples were taken but not yet analyzed by the report due date or where a new discharger has yet to be sampled.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Press the Setup button ( ). Press the Right Arrow button ( ) to select Print Report, and then press OK. Press the Right Arrow button ( ) to select Printer Status Report, and then press OK. The Printer Status Report prints.
Open the start menu and select Control Panel > Administrative Tools > and choose the Services icon. Locate the Print Spooler service and right-click. Then select the option to “Stop” the service.
Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.
Restart devices

If your printer connects to a Wi-Fi network, disconnect your computer or mobile device from the network name (SSID), and then reconnect it to the same network name your printer is connected to. If the printer is available and has a ready status, the issue is resolved.

Definition of unknown. as in unfamiliar. happening or existing without one`s knowledge unknown to me was the fact that while I was out, my family was hurriedly preparing a surprise birthday party. unfamiliar. unbeknown.
Synonyms of unknown (adj. obscure, mysterious) anonymous.
To be specific, you should make sure that your printer has sufficient paper, ink or toner and without paper jam. If the printer cartridge`s status is faulty, you should replace it with a new one. After carrying out these operations, check if the HP printer can print properly. If not, try other methods immediately.
Whenever a paper tray becomes empty or paper is jammed, an e-mail alert is issued to the registered addresses to notify the printer status.
Open HP Smart app, click your printer, click Printers in the top menu bar, and then click Diagnose & Fix. Follow the instructions if any issues are found. If you still can`t print, remove and re-add the printer.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
The Printer not activated error also probably be due to an incompatible, corrupted or old printer driver. You could solve it easily through updating your printer driver. There are ways to update your printer driver: manually and automatically.
Click on Device Manager from the context menu. In Device Manager, click on View and select Show hidden devices. Next, expand the Printers section to view your printer.
Ghost printers are printers that continue to appear in Windows although they have not been used or installed on your system in a long time, which may have been years.
Select Network and Internet > Network and Sharing Center > Change advanced sharing settings. In the Advanced sharing settings dialog box, expand the Private section. Next, under Network discovery, select Turn on network discovery. Under File and printer sharing, select Turn on file and printer sharing.
RESET THE PRINTER

Switch the printer on and unplug the cable completely, both the USB connection on the device and the plug to the power socket. Wait for at least a minute. c. Reconnect the cable and plug it to the power source.

Check the USB cable for damage and recommended length, and then restart your printer and computer. Turn off the printer and the computer. Disconnect the USB cable from the computer and printer, and then inspect the cable. If the cable is damaged or longer than 3 m (9 ft 10 in), replace it.
If your printer is compatible with Windows 10, download and run the Print and Scan Doctor to detect and fix isses. If problems persist, reinstall the latest HP printing software. Download and Install the latest HP printer software and driver.
Your ”Windows Cannot Connect to the Printer” error may result from outdated printer drivers. In this case, you can fix the issue by updating the installed drivers. Windows` Device Manager automates the process, so you don`t have to find and install the latest drivers manually.
Much remains unknown about his early life. Her music was previously unknown outside of Asia. An unknown number of cases go unreported. The victim`s attacker was unknown to her.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP DESKJET 1280 ERROR
ANSWER : Help please! Printer power and paper lights continue to flash,- even after : encoder strip cleaned, carriage rod lubed, carriage is not stuck, rollers cleaned, no paper jambed . I know this is a variation on an existing theme, but could anyone help solve the issue.Many thanksKen

Read Full Q/A … :
Unknown Printer

HP DeskJet 722C Paper Feed Problem
ANSWER : Detach the force string from the holding nothing back one and expel all paper from it.

Read Full Q/A … :
Unknown Printer

hp deskjet 3420- system error
ANSWER : Hi I am having problem in printing from java file , I followed all your steps but C:\\WINDOWS\\system32\\spool\\drivers\\w32x86\\3 after this I am getting no files in this folder ,please help me as I am struggling to get print from java since a week

Read Full Q/A … :
Unknown Printer

HP DeskJet 1220C Prints only Pink & Black
ANSWER : hi everyone. i have an hp ink advantage 5525 all-in-one. changed all cartridges as they were empty and when i tried to print i got blank pages. i gave a print order a couple times to find out what was going on and found out that yellow and magenta inks worked but not cyan and black. removed cartridges, clean and all many times and nothing happened. then i tried this youtu.be/f57jOGj-G5s and the print quality of magenta and yellow improved significantly but still no black or cyan at all. i can’t do the running water thing because the print head is not detachable. any suggestions?

Read Full Q/A … :
Unknown Printer

HP Deskjet 1120C
ANSWER : I have just experienced a similar problem after cleaning out the ink build up without removing the outer case. The two lights are flashing and the ink cartridges end up on the far left after jumping back and fore a few times.

Read Full Q/A … :
Unknown Printer

HP Deskjet 5150
ANSWER : Ok I have the same problem, Kemal. HOW DO YOU DISASSEMBLE the printer carriage and the Ink Service Station from that??

Read Full Q/A … :
Unknown Printer

HP DeskJet 950C Leaking Ink
ANSWER : Thanks for the “loose, white rectangular piece” comment in my 990cse. I found this same white piece of rubber today jamming up the cleaning station carriage assembly and was wondering where it came from!

Read Full Q/A … :
Unknown Printer

HP deskjet 460 Waste ink tank full
ANSWER : I worked fixing printers for 5 years for Verizon and some of the older printers were notorious for the waste receptacle filling and overflowing with ink. My solution was good old warm water. Remove the waste container and scoop out as much as you can with a small screwdriver, wiping the discard on a paper towel, then just run warm water from the faucet into the container till all the residue is removed. This is just water soluble ink folks, if you want to test it, scoop out a glob and dissolve it in warm water, its easy as pie. I never once bought a new ink discard reservoir. I just cleaned out my mobile 460 printer reservoir by the same method. There are no electrical connections its just all plastic.

Read Full Q/A … :
Unknown Printer