Lexmark Optra S
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Place the smart chip against the pins on the reset device. A red light will flash to show you that the chip is engaged. When the light turns green, usually six or seven seconds later, the cartridge chip is reset and ready to use.
If your printer is turned on, disconnect the power cord from the printer. Keep the power plug unplugged for 60 seconds, reconnect the power cord to the wall, and turn on the printer. If the error persists, remove the cartridge from the printer, clean the cartridge contacts with a cloth, and reinstall the cartridges.
Disconnect all devices such as USB drives, printers, webcams, and media cards (SD/xD). Press and hold the power button for 15 to 20 seconds to drain the residual power. Connect the power cable (for desktops) or AC adapter and battery (for laptops). Turn on the computer.
The printer drops the network connection, resets its network settings to their factory defaults, and prints a Printer Configuration label and a Network Configuration label.
To fix toner streaks, first, print several blank pages to see if it fixes the print quality. Next, try cleaning the internal components of the printer such as the laser scanner/mirrors. If this doesn`t work, re-install the toner cartridge.
Verify the toner cartridge is installed correctly
If you install a new toner cartridge but the “Toner Low”, “Replace Toner” or “Toner Ended” error indication remains, the toner cartridge may not be installed correctly. Reinstall the toner cartridge, referring to the instructions on how to replace the toner cartridge.
Use the Factory Reset function to reset certain machine settings back to the original factory settings.
- Pressup or down to select the Reset Menu option, and then press OK.
- Press up or down to select the Factory Reset option, and then press OK.
- Press up to select Reset.
- Unplug the power cord from the back of the machine.
- Plug the power cord back in.
- Verify the exact message on the display of the machine. …
- Open the top cover.
- Remove the toner cartridge and drum unit assemblies.
- Verify that a toner cartridge is installed in each of the drum units.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Dell 3100cn drum cartridge replacement
I have the same problem with excess toner causing lines over the printed page. Have tried to find where the excess toner is stored but cannot do so. No green arrows; there are blue errors but there are no screws beneath these. Have tried removing adjacent screws, but this did not help. Does anyone have a picture of the actual site where the screws need to be removed; for the Dell 3010cn drum cartridge? Bernie
oki c511 drum reset, toner reset, turkey chip reset
If you switch off toner control, you should keep an eye on your prints, and we aware of ink quality, so filling colours as they’re emptying. Nevertheless, it’s an small disturb for the a,ount of money you’re saving ¿isn’t it?
Dell Laser MFP 1600n constant paper jam
I’m having a similar issue, checked you resolution and found the little grey piece seems to be in place and able to rock back and forth. When I send a job to the printer it sounds like it is trying to pick up the paper then I get the ‘Jam 0’ error. Any ideas ?
ip4200 INK TANK RESET and WASTE TANK RESET
Different cartridges, notwithstanding, don’t have a ‘fill gap’ so you’ll have to make one yourself. Our refill units for these sorts of cartridges accompany a smolder apparatus which is utilized to blaze (really dissolve) a fill opening in the cartridge . Our refill guidelines will demonstrate you precisely where to make the fill opening (you would prefer not to make it in the wrong spot). A blaze device come standard in all refill packs for cartridges without processing plant made fill openings. if you want to get proper detailed information then call us at 1-888-924-2961for more information regarding canon printer support.
repair a cartridge
dell 1700 with paper jams
clutch doesn’t lower the roller assembly. The little bum on the paper tray will push the roller assembly down when you push the paper tray inside the unit. Clutch is only involving in rotating the rollers.
Expired Ink Cartridges – Any way to move paper with old cartridges?
You could try disconnecting the printer from the computer. Then change the date on the panel to prior to the expiration date. That should fool it.
Lexmark Reset ink cartridge
Lexmark X7170Cartridge #33 – 18C0033 On front of the Cartridge, where all the contacts are,mine has a small white label with a barcode printed it. I ordered re-filled cartridges and noticed they put what looks like black tape (feels like duct tape) over the white barcode. So I removed the black tape from an empty cartridge, tried it on a new re-filled cartridge and so far, it seems to work.