Epson Stylus Color 1160

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

There may be several reasons behind the issue, such as empty ink cartridges, Clogged Print Head Nozzles, and Incorrect Print Settings. There may be a fault in the settings of Color Management as well. You can fix it via Running a Nozzle Check or enabling the Print Settings to Color or Replacing the Ink Cartridges.
The Cause of Clogs

Printheads clog because nozzles get blocked by either air or ink. Clogs usually happen when: You keep printing with depleted ink cartridges. Using empty ink cartridges can result in air bubbles that can clog your cartridge and/or printhead.

Customizing print settings

Click Advanced, then click More Settings. The following dialog box appears. Choose Color or Black as the Color setting.

Epson printers contain a permanent print head that needs to be charged with all colors to work. Even when you are printing black text only, a small amount of color ink is used to keep the print head charged. The print head needs to be kept charged to prevent air bubbles from entering and damaging the print head.
If the color is still not coming through, let the printer sit for about 10 minutes before running a second cleaning, this allows the ink to soak on the printhead. It might take a couple of cleanings to get a cartridge properly primed, especially if the printer has been sitting for a while.
Fix 1: Perform basic troubleshooting

Make sure the document is set to print in color and enable the color printing feature on your printer. Check the ink level and replace the ink cartridge if necessary. Clean the print head. Most printers have an automatic cleaning feature now.

There`s a trick to printing in color: You must select the color printer in the print menu AND make sure the document is set to print in color under “Printer Properties.” (Most of the time, the color printers default to “color” as the output).
The printer will not operate if a black ink cartridge is expended or any cartridge is removed. If a color cartridge is expended, you may be able to continue printing temporarily with black ink. It`s best to always have extra cartridges on hand.
When color ink is expended and black ink still remains, you can continue printing for a short time using only black ink. However, you should replace the expended ink cartridge(s) as soon as possible.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
There are numerous possible causes for a printer that`s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
Because running on an empty cartridge for too long can cause your printhead to overheat resulting in irreversible printer damage. Some printers are designed to stop printing when an ink cartridge is empty.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus Color 1160

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :

Epson Stylus Color 1160

Epson Stylus PX810FW
ANSWER : You could have air in the tubing/print head.

Read Full Q/A … :

Epson Stylus Color 1160

Epson R3000 Inkjets Clogged
ANSWER : If you haven’t yet destroyed your printer or turned it into a paper weight, check this out:

Read Full Q/A … :

Epson Stylus Color 1160

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Epson Stylus Color 1160

Epson Artisan 700 Ink Reset — Any Other Way
ANSWER : I really need the utility but How do I send you a message? I dont see your address

Read Full Q/A … :

Epson Stylus Color 1160

Epson, sudden cannot recognise cartridges error
ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.

Read Full Q/A … :

Epson Stylus Color 1160

Epson XP600 Paper Jam
ANSWER : hi Russ .did u find solution for ur problem?? i have the same problem ,how did u fix ur printer ..will be glad if u write me on email [email protected]

Read Full Q/A … :

Epson Stylus Color 1160