Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Any of these error codes (51.2c , 51.2m , 51.2y , 51.2k) points to a failure with one of the laser scanner assemblies on the HP Color LaserJet 4600 series. To solve this error code, replace the corresponding laser scanner.
HP Color LaserJet 4600dn Printer – $2,449.99.
The error is indicating that there is a Magenta Laser problem that needs to be resolved by service. You will need to contact an HP-authorized service or support provider.
You need to ensure your HP printer has enough paper, ink, or toner, and it is not stuck on paper jam. Also, check the status of your printer cartridge and try replacing it with a new one if it is not good enough. In some cases, your HP printer stops printing after you replace its parts.
That error code indicates a failure of the yellow laser scanner. Unplug and leave for a few minutes, also make sure you are plugged directly into the wall and not into a surge protector.
This error is primarily caused by a transfer alienation failure in which the ITB is stuck and unable to rotate, the SR9 sensor (the primary transfer roller disengagement sensor) has gone bad or the fuser drive assembly has failed.
57.1 , 57.3 , 57.4 , 57.5 , 57.6 , 57.7 , 57.8 Error HP LaserJet 9000 9040 9050. Any of the 57 errors on the HP LaserJet 9000 , 9040, and 9050 series printers are fan errors. There are 7 fans in the machine. Replacing the corresponding fan usually cures these errors; fans are a common failure part on this model.
If one or more toner cartridges are installed incorrectly, this may result in a 54.2 carousel rotation error. This error is typically accompanied by a loud grinding noise. NOTE: The carousel is the rotating part under the top cover to which all four print cartridges attach.
The printer has detected a jam that does not let Media motor performs the expected movement properly. the movement in the carriage. 2. Check that the Scan axis Motor is not broken, not dirty and undamaged.
This typically means the toner cartridge is binding up internally. Remove the black toner cartridge and look at the right end of it to find a couple of white plastic triangular pieces sticking out.
This 51.10 error code points to a failure with the laser scanner assembly, and to fix this error usually you end up replacing the laser scanner assembly. You can try turning the printer off and back on, which may temporarily reset the error and let you print a few more pages.
Any of these error codes (51.20 51.21 51.22 51.23) points to a failure with one of the laser scanner assemblies on the HP Color LaserJet 4610 an 4650 series. To solve these error codes, replace the corresponding laser scanner.
63.00. 41 There is an error in the toner supplied to the black developer. HP LaserJet Black Developer Unit: 8JM70-67001 (E783xx series) or JC96-11666A (E778xx series}. If the firmware bundle installed on the printer is lower than 4.6.
Description: This error is primarily caused by a transfer alienation failure in which the ITB is stuck and unable to rotate, the SR9 sensor (the primary transfer roller disengagement sensor) has gone bad or the fuser drive assembly has failed.
Quality: While inkjet printers are considered powerhouses when it comes to high-resolution color printing, laser printers do produce solid color and black and white results.
Buy for ₹1,15,500.
In the same way that inkjet and laser printers widely differ in price, cartridge prices for a laser and inkjet printer also widely differ — and for good reason. Laser printer cartridges, also known as toner cartridges, can print significantly more pages than any inkjet cartridge so they are generally more expensive.
Although laser printer cartridges are more expensive, laser printers have a significantly lower cost per page than inkjet printers, particularly if you`re looking to print a lot in black and white.
`Operation could not be completed (error 0x00000709) Double check the printer name and make sure that the printer is connected to the network. Hi, It`s a known issue in Windows 11 22H2. This error occurs because the default connection method has changed in 22H2.
When HP`s latest update occurs, the printer will not print and will display the error message, “Indicated cartridges blocked for containing a non-HP chip. Event Code: 10.00. 46.” The update will occur automatically and without warning, and once updated, the change to HP OEM cannot be reversed.
Toner cartridge sensor error.
This error is specifically related to the fuser drive motor itself. The manual states that it`s a “fuser motor start up error“.
The 59.05 errors are related to main motor and toner cartridge. In many cases the drum unit in the cartridge does not rotate and replacing the defective cartridge will resolve the error.
This error indicates a problem with the Scan Axis motor and you will need to run diagnostics and visually examine the paper path for any blockage or jams. If it was not cutting it is possible that the cutter is jammed and causing excess friction when the head moves.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Suggestions for previous generation of HP color laser jets?
ANSWER : You can just replace the drum wiper blades. http://www.uninetimaging.com/c/539/hp-8500-8550-ep-82

Read Full Q/A … :
Unknown Printer

HP LaserJet 500 Color MFP M575 Scanner Calibration
ANSWER : 0512 is service code for m575

Read Full Q/A … :
Unknown Printer

My 2550n Color LaserJet does not want to print in color
ANSWER : That model had issues with the carousel solenoid sticking. That might explain why it works after you let it sit for 10 minutes. The solenoid gets hotter with use which causes the deteriorated foam on it to become sticky and hold down the release plate instead of letting it go. This allows the carousel to spin when it is supposed to stop for each color. The solenoid is located on the right side of the printer. If you open the lid, it is just behind the opening at the top right. You need to remove the top of the printer and scrape off the goo on top of the solenoid body. I put a piece of thin sticky backed felt to replace it. Other people use electrical tape.

Read Full Q/A … :
Unknown Printer

HP Color Laserjet 3800 problem when printing color
ANSWER : Do a cold reset

Read Full Q/A … :
Unknown Printer

Formatter board repair (HP 2200, 4100, 4600 etc.)
ANSWER : Yes i have two printers one is hp laser jet p2055dn when i print test page,it print blank page and create jam inn cartridge area and another one is hp laserjet enterperise M606,When i try to print tests page,it does not print but give me error code 50:00:00 on the contral panel,who can help me with these printers problem Thanks

Read Full Q/A … :
Unknown Printer

Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.

Read Full Q/A … :
Unknown Printer

Printer Possessed
ANSWER : Oh by the way I wanted to attach the print queue. Are the files he is trying to print too large?

Read Full Q/A … :
Unknown Printer

HP 4700 Color alignment
ANSWER : Thanks much, this method worked for me.

Read Full Q/A … :
Unknown Printer