Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

This usually occurs when one or more toners are not fully seated. Most times it is the black cartridge lock on the left side breaks so the black toner cartridge is sitting a bit out on the left side and the door will not close. Easy to tell. Just remove all the toners and see if you can close the door.
If your printer displays a “door open” error message, the first thing to do is check the front panel to see if the nipple is still there. Check if you can click the front door panel shut. If it refuses to click closed, you will simply have to check for obstructions until you can get it to close.
HP LaserJet 5000n Mono Laser Printer, Demo (C4111A)
The most likely cause is that the latch isn`t engaging properly with the strike plate – the two crucial parts that need to interact in order for the door to stay closed. You`ll generally be able to tell by the absence of any clicks or snaps when you push the door closed.
If the cartridge door is not completely closed, the error message displays. Open, and then close the cartridge door of the product. Make sure that the door rests securely against the body of the product.
Width: 21.08 cm to 91.44 cm (8.3 inches to 36 inches) Length: 55.88 cm to 160.02 cm (22 inches to 63 inches)
size/weights

HP LaserJet 5000dn: 475 x 649 x 615 mm, Weight: 45 kg.

For healthier print heads and more efficient ink consumption, however, it`s better to leave your printer on. Constantly switching your printer off and on will decrease your printer`s lifespan, so try to keep the off/on to a minimum.
The print history queue displays. Items in your print history expire 30 days after they arrive. If you download, share, or reprint a file, the file remains in the print history for another 30 days. Click the All Printers drop-down arrow, and then click the name of the printer to view a specific printer`s print history.
The cartridge access door is located at the front of the printer.
The cartridge access door is located at the front of the printer.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

rear door
ANSWER : This doesn’t make much sense, but I’ll try to help. There is no exit switch or mechanism to govern the paper exiting the rear door. You open the door, the paper comes out. You close the door and the paper is routed up to the top exit. Jams coming out are usually caused by the exit fingers on the right. You can lift them up and see if they are sticking as they come off their resting place. If they stick, they block the paper from exiting. You have to take the top off and scrape and clean off the gooey stuff below where the fingers come down and that will fix it.

Read Full Q/A … :
Unknown Printer

error code 13.06.00 "jam inside rear door"
ANSWER : If it’s jamming in the rear door, why are you blaming the feed rollers. Try opening the rear door and see if it still jams exiting through the back. If so, then it’s probably the fixing film in the fuser assy. is not sliding around the heater because of dried up lubrication. You would need to replace the fuser assy.

Read Full Q/A … :
Unknown Printer

door closed switch broken
ANSWER : Not familiar with how the inside of the door looks but you might be able to tear a piece of paper & bend it to fit in the sensor & tape it down. There is a piece of plastic that normally would be on the inside of the door & blocks the light sensor when the door closes. Sounds like that piece got broken but I’d imagine you can just block it with paper or thin cardboard & tape it in place to prevent it from falling loose.

Read Full Q/A … :
Unknown Printer

ERROR on HP LJ 4525
ANSWER : Print a Configuration page. That will tell you what size paper Tray 2 thinks it has in it. If it doesn’t have plain letter on the page, then it will ask to print from Tray 1.

Read Full Q/A … :
Unknown Printer

Front paper door replacement
ANSWER : Kind of hard to advise without seeing exactly what happened, if anything broke, etc.

Read Full Q/A … :
Unknown Printer

Scanner unit lid won't close
ANSWER : Try gently rocking it up and down. Do not use any force whatsoever or you’ll break the hinges.

Read Full Q/A … :
Unknown Printer

LJ 4200 Downld file now (Download file now)
ANSWER : just thanks this password generator that can allow you hack snapchat account online without any error at all.

Read Full Q/A … :
Unknown Printer

Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.

Read Full Q/A … :
Unknown Printer