Epson Stylus Photo 1280

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

First, we soak the printhead in cleaning solutions for a few hours. Then, we will use a high-pressure steamer to open up the nozzles and blow away debris. Finally, we will use an ultrasonic cleaner to remove clogging particles and dried ink.
The sponge end of a blocked printer head can be cleaned with only one liquid other than water. This liquid is isopropyl alcohol. Isopropyl alcohol isn`t strong enough to melt the sponge but is still strong enough to dissolve the ink inside the blocked printer head.
Clean the printhead nozzles.

Dampen a microfiber cloth with distilled water. Be sure to use distilled water to prevent any residue from being left behind. Avoid using a paper towel that could leave lint on your printhead. Carefully clean your printhead with the wet cloth to remove dried ink.

Using the Head Cleaning utility. Using the control panel buttons. If you find that the printed image is unexpectedly faint or dots in the printed image are missing, you may be able to solve these problems by cleaning the print head, which ensures that the nozzles are delivering ink properly.
(1) Load a sheet of A4 or Letter-sized plain paper in the Rear Tray and set the Paper Thickness Lever to the right. (2) Print the nozzle check pattern to check the print head condition. (3) If the print head nozzles are still not clean, turn off the printer and perform another Print Head Deep Cleaning after 24 hours.
The product prints a nozzle check pattern. Check the printed pattern to see if there are gaps in the lines. If there are no gaps, the print head is clean and you can continue printing. If there are gaps or the pattern is faint, clean the print head.
Otherwise use a printer head cleaning solution recipe of 50% water and 50% rubbing alcohol. We also like a homemade printhead cleaning solution that is 8-parts Windex to 2-parts rubbing alcohol. This printer head cleaning fluid works like a charm and it`s cheap to make!
For models where the print head is in the printer, drop 7 to 10 drops of isopropyl alcohol (91% denatured isopropyl alcohol – not `rubbing` alcohol) down the ink receptacle area where the ink actually flows from the cartridge into the head. Run a few self-cleaning utilities.
If you still see white or dark lines or missing nozzles in your printouts, even after cleaning the print head several times, you can run a Power Cleaning. If you do not see improvement after running a Power Cleaning, turn off the product and wait at least 12 hours before running another Power Cleaning.
Soak the Printhead

Fill a bowl with warm water (or a mixture of water and vinegar to clean the printhead) and place the printhead directly in it. Let it sit for five minutes or so. Pull the printhead out of the water and use a lint-free cloth or paper towel to remove the dried ink.

During the printing process, paper, toner and dust particles can accumulate inside the printer. Over time, this buildup can cause print-quality problems such as toner specks or smearing. This printer has a cleaning mode that can correct and prevent these types of problems.
Dried Ink Buildup on the Printhead

If the print cleaning cycle doesn`t work, dried ink may be the culprit. Take the printhead out and wipe the nozzles clean to remove any buildup. Depending on the model of your printer, this may be difficult—some printheads are harder to remove than others.

DURABrite Inks are featured in the Epson printers and all-in-ones designed for dedicated productivity. DURABrite Inks are water-, smudge-, and fade-resistant on all supported papers—plain, matte, and glossy.
A cleaning sheet will help remove dust from the rollers, which can cause a loss of traction and prevent paper from feeding properly. Caution: Remove the instruction sheet attached to the Epson Ink Jet Printer Cleaning Sheets and do not follow the steps on it; they are not correct for your printer.
Print head cleaning takes about thirty seconds to complete. Caution: Never turn off the printer while the processing light is flashing. Doing so may damage the printer.
The Cause of Clogs

Printheads clog because nozzles get blocked by either air or ink. Clogs usually happen when: You keep printing with depleted ink cartridges. Using empty ink cartridges can result in air bubbles that can clog your cartridge and/or printhead.

If you still see white or dark lines or missing nozzles in your printouts, even after cleaning the print head several times, you can run a Power Cleaning. If you do not see improvement after running a Power Cleaning, turn off the product and wait at least 12 hours before running another Power Cleaning.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

What fluid to clean epson head?
ANSWER : There’s only 1 left, so better hurry. http://www.rjettek.com/jiecr-ocp-rinse-epson-blue/

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Epson Stylus Photo 1280

Need help for cleaning epson r300, have a kit
ANSWER : Don’t worry about the paper towel. Keep the heads as far to the right as you can and the fluid will just go into the waste sponge underneath. There’s nothing you can damage with the fluid. I wouldn’t worry about the pad that got torn. Just insert the syringe in the nozzle and gently push the fluid down into the heads. This site sold tens of thousands of those kits and I guess the instructions were pretty good because there was never a single complaint.

Read Full Q/A … :

Epson Stylus Photo 1280

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Artisan 700 Ink Reset — Any Other Way
ANSWER : I really need the utility but How do I send you a message? I dont see your address

Read Full Q/A … :

Epson Stylus Photo 1280

Epson R3000 Inkjets Clogged
ANSWER : If you haven’t yet destroyed your printer or turned it into a paper weight, check this out:

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Stylus PX810FW
ANSWER : You could have air in the tubing/print head.

Read Full Q/A … :

Epson Stylus Photo 1280