Samsung ML 1660

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Follow these steps to reset the firmware of your Samsung ML-2160 printer: Turn off your printer and disconnect it from the power source. Connect your printer to your computer using the USB cable. Run the firmware reset software that you downloaded.
1. Hold STOP/CLEAR button about 3-4 seconds until the LED flashes once then leave. 2. Hold STOP/CLEAR button again for approximately 10 seconds until the LED stay green, then leave.
Hold the button PRINT SCREEN / WPS (above the power button) for about 10 seconds until the LED flashes once then leave. – Counters reset to 100% after each stop/ start the printer.
Steps to reset the latest Samsung phones

Enter the code *2767*3855# or *2767*2878# and hit the call button. You will see a warning pop-up; click Yes to proceed. Your Samsung phone will start the factory reset process.

Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage. Then select Set as default. If you don`t see the Set as default option, the Let Windows manage my default printer option may be selected.
*2767*3855# (Wipe Your Device and Reinstall Firmware)

Think of it as a factory reset—type this code on your dialer and run it, and it`ll effectively delete all data from your phone, and wipe it clean.

A factory reset, sometimes called a hard reset or a master reset, will remove all personal information, changes, and data from your device, returning it to the same settings and data that it had when it left the factory.
The factory-set combination is 0-0-0-0. Push the reset lever left and down. The lever will remain in this position while you reset the combination. Rotate the dials to your desired combination.
In the Command Prompt type, net stop spooler, then press Enter to Stop the Print Spooler. In the Command Prompt type, net start spooler, then press Enter to Start the Print Spooler.
If you`ve tried all possible solutions and you still can`t print to your printer, reset the printing system. This process deletes all printers from your list of printers, deletes information about all completed print jobs, and deletes all printer presets.
Usually, it should not take more than a few minutes to restore the printer to its factory settings. However, I recommend you to perform the following steps to isolate the issue and arrive at a fix: Disconnect the power cable from the printer while the printer is still ON.
To change your printer IP address, type its current IP address into the address bar of a web browser. Then go to the Settings or Network page and change your printer`s network to a static/manual IP address. Finally, type in the new IP address.
The default User ID is admin and Password is sec00000, but it can be changed from the default.
The default User ID is admin and Password is sec00000, but it can be changed from the default.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

oki c511 drum reset, toner reset, turkey chip reset
ANSWER : If you switch off toner control, you should keep an eye on your prints, and we aware of ink quality, so filling colours as they’re emptying. Nevertheless, it’s an small disturb for the a,ount of money you’re saving ¿isn’t it?

Read Full Q/A … :

Samsung ML 1660

reset counter without chips for samung SL-M2070 W
ANSWER : http://fix-bay.com/fix-proshivka-sl-m2070-sl-m2070w-samsung-xpress-skachat-v-08-16-20/

Read Full Q/A … :

Samsung ML 1660

Toner chip resetter or cheap replacement source
ANSWER : There is a chip resetter if you can find someone who sells it. http://apexmic.info/how-to-reset-chip-dell-1250c.h…Otherwise, do a google search on dell 1250c reset chips. There are lots of suppliers.

Read Full Q/A … :

Samsung ML 1660

Resetting of chip for hp toner Q6000A
ANSWER : HP Color Laser Jet 1600 – Thanks for all the above information. Even though the 1600 is a different printer, I followed the above: “…go to “System Configuration”; then to “Print Quality”; I then get a choice of “Replace Supplies” and then “Overide Out”…” Selecting “Overide Out” got my 1600 back to printing, although I did have do perform the steps TWICE before it seemed to take affect. Not sure what was going on, but I’m happy that people put the information out there for the rest of us to have.

Read Full Q/A … :

Samsung ML 1660

ip4200 INK TANK RESET and WASTE TANK RESET
ANSWER : Different cartridges, notwithstanding, don’t have a ‘fill gap’ so you’ll have to make one yourself. Our refill units for these sorts of cartridges accompany a smolder apparatus which is utilized to blaze (really dissolve) a fill opening in the cartridge . Our refill guidelines will demonstrate you precisely where to make the fill opening (you would prefer not to make it in the wrong spot). A blaze device come standard in all refill packs for cartridges without processing plant made fill openings. if you want to get proper detailed information then call us at 1-888-924-2961for more information regarding canon printer support.

Read Full Q/A … :

Samsung ML 1660

Samsung-chip-ML-1865W-V3.00.01.10-CRUM-reset Fix Firmware
ANSWER : no

Read Full Q/A … :

Samsung ML 1660

HP C6180 Hard Reset procedure
ANSWER : How do I hold down the # and the 6 at the same time? The “#” requires holding the shift key and the “6” doesn’t. Maybe you all have a different type of keyboard. My printer is HP 1220C.

Read Full Q/A … :

Samsung ML 1660

reset waste ink
ANSWER : The important thing to accomplishment in the binary alternatives – that familiarity with methods! The best tactic for myself I found on one of many forums, there clearly was a post with the suggestions in which this web site emerges http://optioninvest.org/ with the most effective strategies and brokers. Encouraged a friend, they were satisfied))

Read Full Q/A … :

Samsung ML 1660