Brother Compactronic I
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Open the Printer Driver Property by clicking right on the Printer icon and selecting “Properties” from the menu. Click on Printing Preferences button in the “General” tab. Select Advanced tab. Select the required resolution and click OK.
300 PPI is the optimal printing resolution for digital printing presses. This issue applies to all print products, from small products like business cards and postcards to larger products like booklet printing and a pocket folder. Designing a file in lower than 300 PPI will lead to blurriness and pixellation.
The login name for the Administrator is ”admin” (case sensitive) and the default password is ”access”.
The most common cause for this issue that the document size setting that is within the application DOES NOT match the paper size that is loaded within the machine`s paper tray. It is very important that you adjust the application`s document size.
Updated: 02/01/2021 by Computer Hope. A default printer is a printer all print jobs are sent to unless otherwise specified. Having a default printer prevents a program from asking the user what printer they want to use each time they print.
Tip: (Acrobat only, not Adobe Reader) You can set up a PDF to default to specific scaling or print options. Choose File > Properties, and click the Advanced tab. Select options for the Print Dialog Presets. The Default option in the Page Scaling pop-up menu is Shrink To Printable Area.
Go to Control Panel, select Devices and Printers, and then select the printer(s) in question. Right-click on the printer, and select Properties, then look for the print quality or DPI settings page to change your printers default resolution.
What Is Print Resolution? Print resolution measures the maximum number of droplets of ink a printer deposits in one square inch of your final printed image. This measurement is often referred to as dots per inch (DPI).
From the printer properties, change to the Paper tab and select Auto Selection from Paper Source option. Besides, in the MS Word`s Menu bar, click Tools > Option. Then choose the Printer tab. On the default paper tray option, choose Use Default Printer Setting.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Brother mfc-L2720DW – Change Langage
ANSWER : Item #4 to change language. http://mans.io/files/viewer/52142/1
Epson R340 Message Resolution
ANSWER : Read this thread http://www.fixyourownprinter.com/posts/48646
ANSWER : The resolution varies depending on the printer driver setting.
Changing Language of Printer Brother MFC-J5910DW
ANSWER : I have a 2720DW from the netherlands it is a french model an it has the code 0009
Message is unable to change 4f
ANSWER : You can try this free reset procedure. If that fails, you need to replace the printhead. They cost about $80.
newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…
changed fusing unit, machine won't power (won't come back on)
ANSWER : You should always change fusers with the power plug pulled. You should check and make sure both ends of the power plug are firmly in. I’ve been on calls where I have found either end not connected. Waste of my time.
ANSWER : You can try to reset it from the service mode. This error usually indicates a problem with the fuser unit or with a sensor that is malfunctioning. To get to service mode:1. press the star button 2. then press 2 and 8 at the same time3. then press the star button again.4. this should put you in service mode. if not you will have to try steps 1-3 again5. once in service mode Select COPIER, this will give you some options along the top.6. in the next list Select FUNCTION7. in the next list select CLEAR.8. finally select ERROR9. press ok.10. Turn off the machine from the power switch11. wait 30 seconds12. Turn the unit back on13. If the error is gone, you will be all set, if not you will need to get the machine serviced to correct it.