Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

When the message “Ink absorber full.” is displayed, the printer stops printing and needs ink absorber replacement. Push the power button to turn OFF the printer, and then contact the service center for replacement. Request either Canon or the dealer you purchased the machine for a repair service.
The bottom part of the printer Canon Pixma is fully covered with sponges and forms the so-called waste ink tank. Each time you clean the printheads on your inkjet printer, ink is sucked out of the printer`s print nozzles and out of the cartridges, and into the sponges on the bottom of the printer via one or more hoses.
The purpose of the waste ink absorber is to safely collect any waste ink expelled during cleaning of the print head and borderless printing on photo printers. Over time this waste ink absorber can become full and will need to be replaced.
The message Ink Absorber Full is an indication that the machines internal ink absorbers are almost full. These ink absorbers are used to hold ink after it has been purged from the print head during the print head cleaning cycles. They can hold enough ink to last the normal expected life of the machine.
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
This is typically caused by an incorrect selection made during the LCD prompting after a cartridge is replaced or the lock release lever did not snap securely over the ink cartridge when installing.
You have the option of disposing of your existing cartridge and replacing it with a new one, but the far most cost-effective option is to empty this waste toner cartridge yourself. Below, we`re going to step you through how you can save on your printing expenses by handling this process yourself.
Insert the Waste Ink Drain Tube coupler into the Waste Ink Drain, on the back of the printer. It will click and lock into position. Loosen the Black Plastic Cap on the top of the Waste Ink Tank. The waste ink will flow out of the Waste Ink Drain Tube.
The error “Ink Absorber Full” means that the internal ink absorber or flushing box will need to be replaced. The need to replace these items and the time period before replacement is dependent on the number of purges and flushes required to clean the ink system.
This may be caused by pieces of paper or foreign matter in the machine, or paper not loaded correctly.
Waste ink absorber error 1700

Eight flashes indicates that this absorber is nearly full. Press the <Stop/Reset> button to clear the error so you can continue printing. Before the waste ink absorber becomes completely full, the printer will need to be serviced.

The machine`s memory space allocated for patterns is full and printing cannot proceed. Change the pattern setting in the printer driver and try printing again. Alternatively reduce the complexity of the print job by reducing the number of patterns that need to be downloaded to the machine.
When these pads are saturated, the printer will notify you with an error message such as “Ink Absorber Full.” Some models display a series of flashing lights that you must consult the user manual to decipher. When the ink absorber pads are full, you can easily remove and clean them on most Canon printers.
How long does Canon ink last? Canon ink can last for up to two years in its sealed packaging. Even after two years, you may still get some more life out of the cartridge, so it may be worth trying after the fact.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
You can run a power ink flushing to replace all of the ink in the ink tubes if necessary. This may improve print quality, but consumes more ink than the head cleaning or powerful cleaning options. This process can take up to 20 minutes.
Can you print with one or two empty ink cartridges? The quick answer is: Yes, you can (if you own a printer model that allows it) — but you shouldn`t keep printing with an empty cartridge for too long.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
If you are experiencing a “Low Ink” warning, you will still be able to scan, but not print. If you are getting a “Ink Out” error, you will not be able to use the unit until the ink is replaced. These precautions are in place to prevent damage to the printer from occurring if printing with no ink is attempted.
A message appears on the printer touch screen when the waste toner container is full. If you continue copying or printing without replacing the waste toner container, the printer stops after copying or printing approximately 18,000 sheets. Replace the Waste Toner Container.
It indicates that it is almost time to replace the waste toner box of this machine. If you continue to use, “Waste Toner Full.” will be displayed and the printing will stop.
A waste tank is whenever the printer does self-cleaning, it dunks some waste ink into a waste pad. Therefore if you do lots of cleaning, the waste tank will be full. You can look at the printer`s right back corner; there`s a screw secure the cover.
They are designed to collect any “waste ink” the printer produces.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Waste tank counter reset code for Canon printers.
ANSWER : I have a Canon Pixma MG4150 and I never see any references to it on help pages. I too want to get rid of the ink absorber warning after havig cleaned and reinstalled the absorber pads. Can anyone help?

Read Full Q/A … :
Unknown Printer

ip4200 INK TANK RESET and WASTE TANK RESET
ANSWER : Different cartridges, notwithstanding, don’t have a ‘fill gap’ so you’ll have to make one yourself. Our refill units for these sorts of cartridges accompany a smolder apparatus which is utilized to blaze (really dissolve) a fill opening in the cartridge . Our refill guidelines will demonstrate you precisely where to make the fill opening (you would prefer not to make it in the wrong spot). A blaze device come standard in all refill packs for cartridges without processing plant made fill openings. if you want to get proper detailed information then call us at 1-888-924-2961for more information regarding canon printer support.

Read Full Q/A … :
Unknown Printer

MP390 Waste ink tank full.
ANSWER : Thank you very much. Followed the reset and alarm light instructions and works great! Saved at least $100 service fee and/or replacing our printer.

Read Full Q/A … :
Unknown Printer

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Read Full Q/A … :
Unknown Printer

MP170 (5b00) Ink Tank Full Error
ANSWER : Thanks, worked a treat!

Read Full Q/A … :
Unknown Printer

Waste tank reset
ANSWER : Sorry thats meant to be the iP7250

Read Full Q/A … :
Unknown Printer

waste ink tank
ANSWER : There is no waste ink “tank”. There are some sponges and they usually are about 1/4 saturated when you get the message. If you want to go through the trouble to remove them, you can just wash them in hot water and dry them out as the ink is water soluble. Or, you can search the web for a waste tank reset procedure and not worry about it.

Read Full Q/A … :
Unknown Printer

Epson 2400 waste ink tank full?
ANSWER : The “waste tank” is actually just a foam sponge cut to fit space under the print head travel. If you’re careful you can get it out with a pair of long ! tweezers, rinse it in water and dry it. It may come out in pieces…assemble them as a template to make a new one or try to buy a new one on- line. Before putting it back in clean the whole region under the head travel as best you can with plenty of paper towels. This is a messy job, so prevention will save a lot of cleanup. Good luck.

Read Full Q/A … :
Unknown Printer