Canon Personal Copiers (PC) 530

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Canon printers use small, spongy pads to absorb excess ink that accumulates while printing and cleaning the print heads.
The bottom part of the printer Canon Pixma is fully covered with sponges and forms the so-called waste ink tank. Each time you clean the printheads on your inkjet printer, ink is sucked out of the printer`s print nozzles and out of the cartridges, and into the sponges on the bottom of the printer via one or more hoses.
A waste tank is whenever the printer does self-cleaning, it dunks some waste ink into a waste pad. Therefore if you do lots of cleaning, the waste tank will be full. You can look at the printer`s right back corner; there`s a screw secure the cover.
Waste Ink Pads are actually a number of porous pads in the printer that collect, distribute, and very importantly contain the ink that is not used on printed pages.
Why is so much ink being wasted? Whenever you power up your printer, it goes through a maintenance and cleaning cycle which uses ink. That`s what`s happening when the printer head moves back and forth after your turn it on. This intermittent use can burn through more than half the ink in the cartridge.
The error “Ink Absorber Full” means that the internal ink absorber or flushing box will need to be replaced. The need to replace these items and the time period before replacement is dependent on the number of purges and flushes required to clean the ink system.
An EcoTank printer is fundamentally different to most printers – it features a large ink tank that you fill with the included ink bottles instead of cartridges. From the start you have enough ink to print up to 14,000 pages4 – that means both money and time are saved as you`re not frequently changing cartridges.
Q: Does ink dry in ink tank printers? A: Yes, just like how ink dries up in cartridges that are not used for extended periods of time, so can ink dry up in an ink tank printer. Ink tank printers are inherently still inkjet printers so it inherits the same problems.
You can continue to use the product even if one or more ink tanks are not filled all the way. However, for the most accurate ink level monitoring, fill all the ink tanks up to the top line. Caution: Wear disposable gloves while refilling the ink tanks to avoid staining your hands.
Ideally, you should recycle them as soon as they`ve been used, as this stops the ink residue left inside the cartridge from drying out, making them easier to clean. The cartridges can then be refilled, re-sold and reused.
Ink tank printers have a refillable ink tank that is built into the tank printer. When the ink in the tank runs low, it needs to be refilled – either by using ink bottles or specially engineered ink cartridges, depending on the brand of ink tank printer.
Ink can contain a number of toxic metals and is a form hazardous liquid waste.
So, to cut to the chase; No, we do not recommend you re-use your waste ink in your printer cartridges, your CIS system or basically anything that means it`ll go back into your printer.
If you feel that the ink cartridges run out very quickly every time you replace the ink, it`s possible you are printing high density documents frequently. The ink consumption varies very much on print density.
Laser printers use toner powder instead of dye or pigment-based ink. Laser printers produce electrostatically charged dots on a light-sensitive drum which attracts toner powder. The toner is transferred to the paper and fixed by a heating process. Laser printers deliver crisp black and white and brilliant color prints.
There are chips inside the original cartridges to record how many pages were printed and they cannot be reset. As a result the printer reads the chips and tells you that the cartridges are empty, even though they are not. This is why you are getting the “ink low” message even though the ink tank is at full capacity.
The error “Ink Absorber Full” means that the internal ink absorber or flushing box will need to be replaced. The need to replace these items and the time period before replacement is dependent on the number of purges and flushes required to clean the ink system.
Remove the print cartridges from the printer, disconnect USB or other connecting cables and remove the power cord. The print cartridges should be disposed of separately through a recycling program while the USB cable, power cord or other cables can be reused by other electronics or disposed of separately.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

ip4200 INK TANK RESET and WASTE TANK RESET
ANSWER : Different cartridges, notwithstanding, don’t have a ‘fill gap’ so you’ll have to make one yourself. Our refill units for these sorts of cartridges accompany a smolder apparatus which is utilized to blaze (really dissolve) a fill opening in the cartridge . Our refill guidelines will demonstrate you precisely where to make the fill opening (you would prefer not to make it in the wrong spot). A blaze device come standard in all refill packs for cartridges without processing plant made fill openings. if you want to get proper detailed information then call us at 1-888-924-2961for more information regarding canon printer support.

MP390 Waste ink tank full.
ANSWER : Thank you very much. Followed the reset and alarm light instructions and works great! Saved at least $100 service fee and/or replacing our printer.

Waste tank counter reset code for Canon printers.
ANSWER : I have a Canon Pixma MG4150 and I never see any references to it on help pages. I too want to get rid of the ink absorber warning after havig cleaned and reinstalled the absorber pads. Can anyone help?

Ink Tank Cannot Be Recognized(Canon mp500)
ANSWER : My MX922 ran out of yellow (slowly) then didn’t recognize first one and then a second new Canon CLI-251 yellow cartridge. I’ve always used Canon. Then I inserted a 251a Y (extra large) yellow, and it worked immediately – for how long, I don’t know. Guess I’ll order another set of XL ink tanks – either that or a new printer.

waste ink tank
ANSWER : There is no waste ink “tank”. There are some sponges and they usually are about 1/4 saturated when you get the message. If you want to go through the trouble to remove them, you can just wash them in hot water and dry them out as the ink is water soluble. Or, you can search the web for a waste tank reset procedure and not worry about it.

replacing waste ink absorber on Canon Pixma ip6000
ANSWER : ditto, ditto & ditto

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Canon Printer does not print blue ink
ANSWER : I was also facing same issue with my printer. I tried a lot to fix that however I was not able to fix that. I got this link http://www.printer-techsupport.com/Canon-printer-support.htmlover the internet. I just visited and made a call on their toll free and got instant help for my printer.