Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle. REFERENCE. If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the FINE cartridge whose ink is low.
Check the nozzle check pattern you printed. (1) If lines of this pattern are missing, the print head nozzles need cleaning. (2) If these patterns have white streaks, the print head nozzles need cleaning.
It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
If the nozzle check page does not print satisfactorily, there is a problem with the printer. This could be a clogged ink nozzle or a misaligned print head. See Cleaning the Print Head for details on cleaning the print head. For information on aligning the print head, see Aligning the Print Head.
What Is Banding? Banding is a defect in inkjet printing that will appear as horizontal or vertical lines, streaks or bands in the printed output. Everyone will eventually experience some type of banding with their inkjet printer.
Go to the printer panel, click on Maintenance, then Paper Feed Adjust, then Adjust Print Quality, then select AUTO . Run another print after the pattern prints and scans. If the banding does not disappear you may have to go back through these steps and instead of AUTO, run the Manual Adjustment.
There are a few things that could be the cause of this problem, including: Empty ink or toner cartridges that need replacing. Ink or toner cartridges that have become dislodged from their proper place. The wrong paper size loaded in the input tray.
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle. Note. If the remaining ink level is low, the nozzle check pattern will not be printed correctly.
After a lot of use, your inkjet printer`s printhead nozzles may become blocked with dried ink. The first thing you can do is initiate a cleaning cycle and add drops of 91% isopropyl alcohol if needed. If the steps above does not work, you may need to manually clean the printhead out of the printer.
Alcohol that is 90% pure also works well. You can use 70% pure isopropyl alcohol, but if you do, you must wait much longer after cleaning to ensure that it is completely dry. For example, 99% isopropyl alcohol might dry in as quickly as one minute; 70% isopropyl alcohol can take as long as 15 minutes.
Nozzle alignment regulates the position of the hotends in order to achieve the best accuracy during the printing process. You need to carry out the platform leveling before commencing the nozzle alignment calibration.
In nozzle check valves, the shutoff mechanism is a disc, which is held against the seat by an internal spring. When the pressure of the fluid, gas, or slurry against the disc at the inlet overpowers the closing force of the spring, the spring compresses and the fluid, gas, or slurry flows freely.
When a flow nozzle is placed in a pipe carrying whose rate of flow is to be measured, the flow nozzle causes a pressure drop which varies with the flow rate. This pressure drop is measured using a differential pressure sensor and when calibrated this pressure becomes a measure of flow rate.
There are four primary causes for horizontal banding on prints from inkjet printers, (1) nozzle clogs, (2) mis-aligned print heads, (3) low quality print settings (4) incorrect paper thickness settings. Below we will describe each of these causes for horizontal banding as well as ways to try and fix them.
Banding happens when you do not have enough information in your file. Or you push the edits to an extreme. Avoid banding by making a well-exposed photograph and saving it as an uncompressed RAW file. To fix color banding, make subtle edits and limit how much you compress the photo when exporting as a JPEG.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
You`ll know the drum is dirty if you notice that the print quality has become blurry and features blank spots or oddly-colored spots despite having full toner cartridges. Horizontal lines across the printout when the paper passes over a dirty area are another sign that it`s time for some maintenance.
Remove the toner cartridge and gently wipe to remove any dust or toner underneath with a dry cloth. If you notice excess toner inside the print device, it may be possible to remove it using a vacuum that is specifically designed to capture fine dust particles like toner powder. These vacuums can be costly, however.
Color banding is the unpleasant, stark lines of color that appear in your picture. This issue usually occurs in photos with sizeable mono-colored sections like for example the sky, where the transitions between different colors become abrupt, harsh, and blatant enough to be easily noticeable.
1. On the printer display home screen, select the “set up” button (it looks like a gear). 2. Select “settings” > “device settings” > “reset settings” > “reset all” > “OK” and then “Yes.”
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
Automatic print head cleaning

The cleaning function is included in the software of almost every printer. Usually, you can find it under the “printer maintenance” section of your printer`s display menu. Automatic print head cleaning usually takes only one or two minutes, so you won`t need to wait for too long.

Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon MX922: PGBK Blurry Letters and Bad Grid
ANSWER : mg6460 same problem. I did print head clean 3 times. It wont fix.

Read Full Q/A … :
Unknown Printer

Canon MP530 – 6A00 Purge Unit?
ANSWER : I just took apart my MP530 which produces the 6A00 error, and cleand the wiping pads, rubber blades and everything I could reach from the purge unit. I also cleaned the print head. The waste ink level in the EEPROM is 66%.

Read Full Q/A … :
Unknown Printer

Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.

Read Full Q/A … :
Unknown Printer

Canon MX922 printer with B200 service code
ANSWER : Try green copy button and red triangle in a circle together while releasing the power button upon restarting printer.

Read Full Q/A … :
Unknown Printer

Canon Printer reset tool for MP100 MP400 series
ANSWER : Thanks a million for this. I have just managed to get my MP460 Ink levels reset having tried lots of other sites and failed.

Read Full Q/A … :
Unknown Printer

Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.

Read Full Q/A … :
Unknown Printer

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Read Full Q/A … :
Unknown Printer

Canon MP600 died
ANSWER : hey guys I found this on the net check it out maybe somebody can make something out of it cuase they omitted this part on the service manual that I attained cause I have the same problem hope this helps.

Read Full Q/A … :
Unknown Printer