Canon FC 2

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Ensure your Printer Driver is Up to Date. A printer driver that is not updated and faulty can result in many issues, such as color printing issues. If you are facing color printing issues on your Canon printer, try to update it to the newest version. Find the official printer driver from the website and download it.
If your printouts have incorrect colors, try these solutions: Make sure the paper type setting matches the paper you loaded. Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. Run a nozzle check to see if any of the print head nozzles are clogged.
It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
If the print positions slightly shift for the respective colors, use the following procedure to perform color print mismatch correction. Press (Settings/Registration) <Adjustment/Maintenance> <Adjust Image Quality> <Auto Correct Color Mismatch>.
RGB colors that are output as CMYK colors are pulled to the nearest CMYK equivalent which is always darker. The reason why the printer output doesn`t match the screen is because light can`t be printed.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Printers may produce poor quality printing if they are exposed to too much heat. Don`t place your printers in a high-temperature area or near other devices that produce excess heat. In addition, keep them away from windows, where heat and humidity can be high.
Color calibration enables your printer to produce consistent colors with the particular printheads, inks and paper type that you are using, and under your particular environmental conditions.
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
The Color correction setting adjusts how colors are displayed on the screen for users who are color blind or have difficulty distinguishing between colors.
Color mismatch correction is the task of transferring color from one view of a stereopair to corresponding areas in another where the colors differ incorrectly. Color mismatches can decrease the overall video quality and may cause viewer discomfort and headaches.
When it comes to RGB vs. CMYK, what`s the difference? Both of these color modes mix colors to create different color possibilities. The main difference is what they are generally used for in design: RGB is the color mode best for digital designs and CMYK is best for printing.
Because there are no methods for printing in RGB, no matter where you print you must convert your project to a printable format (CMYK). This is a crucial step in the printing process and affects how well your colors are represented in the final product.
Your blue came out purple because of the divide between RGB and CMYK color gamuts. In simplest terms, the colors available in the RGB color gamut (what you can see on your screen) are much greater than the colors available in the CMYK gamut (what can be printed).
Why is my printer printing yellow not red? It is most likely that your image is yellow where you were expecting it to be red and you may also notice that blue parts of the image appear turquoise instead. Both of these effects are caused by a lack of magenta ink/toner on your prints.
Why is my printer printing yellow not red? It is most likely that your image is yellow where you were expecting it to be red and you may also notice that blue parts of the image appear turquoise instead. Both of these effects are caused by a lack of magenta ink/toner on your prints.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP Color Laserjet 3800 problem when printing color
ANSWER : Do a cold reset

Read Full Q/A … :

Canon FC 2

Canon MP600 uses color ink to print black and white…
ANSWER : Have you tried setting the print out to grayscale only (black and white)?

Read Full Q/A … :

Canon FC 2

My 2550n Color LaserJet does not want to print in color
ANSWER : That model had issues with the carousel solenoid sticking. That might explain why it works after you let it sit for 10 minutes. The solenoid gets hotter with use which causes the deteriorated foam on it to become sticky and hold down the release plate instead of letting it go. This allows the carousel to spin when it is supposed to stop for each color. The solenoid is located on the right side of the printer. If you open the lid, it is just behind the opening at the top right. You need to remove the top of the printer and scrape off the goo on top of the solenoid body. I put a piece of thin sticky backed felt to replace it. Other people use electrical tape.

Read Full Q/A … :

Canon FC 2

Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.

Read Full Q/A … :

Canon FC 2

re Black not printing for Canon printers
ANSWER : Wow 5 years later I have the same problem, it worked TKS!

Read Full Q/A … :

Canon FC 2

Canon BJ-2000 only prints color…
ANSWER : thx for information canon BJ-200 visit www.cahayafotocopy.com

Read Full Q/A … :

Canon FC 2

Canon Pixma MP610 won't print in black
ANSWER : Printer cleanings use wet ink to clear dried up ink. Yeah, that works real well. The best way to clean the heads is remove all the ink tanks. Next to the tanks on the right, there is a plastic release lever. Pull up on it and it will release the heads. Reach in and pull them out. Take the heads over to the sink and run hot tap water into the screen for the black and then turn it over and run it over the heads on the bottom. Repeat a few times and reinstall.

Read Full Q/A … :

Canon FC 2

CANON P200- ERROR 5100 PLEASE HELP!
ANSWER : Read this for solutions http://www.mytechtime.com/2011/10/canon-error-5100-how-to-fix.html

Read Full Q/A … :

Canon FC 2