Canon Bubblejet (BJ) 5

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

A possible cause may be that appropriate paper is not used or the amount remaining in toner cartridges is running low.
The Status light stays yellow and on steady (not flashing) normally to indicate that there is data remaining in the printer`s memory. Press the GO button once to print the remaining data in memory.
If the nozzle check pattern shows adequate ink, but the printer doesn`t print color, clean the printhead. After that, print a nozzle check pattern. After performing printhead cleaning, perform a printhead deep cleaning. If still, the problem persists, switch off your printer and do the deep cleaning after a day.
Black, cyan, magenta, or yellow vertical lines or streaks can be caused by a dirty corona wire, a toner cartridge, or the drum unit. To identify if a corona wire, toner cartridge, or the drum unit could be causing the issue, follow the steps below. 1.
The printhead could be clogged, and you might need to clean the printhead several times to restore print quality. Use an automated tool from the printer control panel to clean the printhead.
Yellow can stand for cowardice and deceit as well as freshness, happiness, positivism, clarity, energy, optimism, enlightenment, remembrance, intellect, honour, loyalty, and joy. Yellow that is drab or dull might be a warning sign for disease, envy, and caution.
Banding is a defect in inkjet printing that will appear as horizontal or vertical lines, streaks or bands in the printed output. Everyone will eventually experience some type of banding with their inkjet printer. To resolve the issue, it is important to quickly identify the type of banding that is occurring.
The band-shaped “stripes” are called “horizontal bands” or “banding.” Horizontal bands are caused by the subtle changes in the movement distance that occur when feeding the media depending on the media`s thickness. We recommend making corrections to match the media you are using.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
When your printer leaves black lines, the lines indicate that there are excess toner powders on the rollers or transfer belt within the printer. As the paper is moved along by the rollers and transfer belt, any excess powder left on them can result in lines being left on the paper.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Print problem with Canon MP620
ANSWER : Open the front of the printer.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon MP600 uses color ink to print black and white…
ANSWER : Have you tried setting the print out to grayscale only (black and white)?

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon MP560 PGBK not printing top grid
ANSWER : Hello, I have the same problem a number of people on this forum have raised in my Canon IP4500 – the PGBK ink is not printing at all, despite several deep cleansing cycles, soaking the print head overnight a few times. If you could advise any potential fix, that would be great. My email is [email protected]

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon Printer does not print blue ink
ANSWER : I was also facing same issue with my printer. I tried a lot to fix that however I was not able to fix that. I got this link http://www.printer-techsupport.com/Canon-printer-support.htmlover the internet. I just visited and made a call on their toll free and got instant help for my printer.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

PGBK shows no band on test print;
ANSWER : Take out all the inks. On the right side of the cartridge assy. you will see a plastic lever. Lift it up and reach inside and remove the printhead assy. Take it over to the sink and run hot water into the black screen on top to flush out the dried ink. Then flip it over and run hot water on the print heads. Do it for about a minute for each side and then repeat. Blot it dry with a paper towel. Reinstall and try it again.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon MP530 won't print black
ANSWER : I have the same problem with my canon MG6120, no PGBK. all other colors print beautifully. I am guessing the purge unit needs attention. I have cleaned the print head several times. Your advice would be appreciated.

Read Full Q/A … :

Canon Bubblejet (BJ) 5