How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Check1 Make sure that the printer is turned on. Check2 Make sure that the Wi-Fi lamp is lit on the front side of the printer. If the Wi-Fi lamp is off, Wireless LAN is inactive. To activate Wireless LAN, press and hold the RESUME/CANCEL button, then release the button when the POWER lamp flashes white 10 times.
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
Check Cables and Printer USB Ports
Check all cable connections (including the power cord) on the printer side. If the printer does have power and you`ve properly connected the communication cable, but the printer is still not recognized, try switching to a different USB port on the PC.
The yellow triangle on the printer is the alarm lamp of the printer; if it is lit, it indicates that there is an item that needs to be addressed on the printer.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
There are a few things that could be the cause of this problem, including: Empty ink or toner cartridges that need replacing. Ink or toner cartridges that have become dislodged from their proper place. The wrong paper size loaded in the input tray.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
The easiest way to connect the Canon printer to the computer is via a USB cable. It`s the traditional method of connecting devices. One end of the USB remains connected to the printer, and the other must be connected to the computer`s USB port.
– The printer driver may not be installed correctly. Uninstall and re-install the printer driver. Make sure that there is a direct connection between the printer and USB port of the computer. Reboot the computer with the printer`s USB cable unattached and reconnect the cable once the computer has restarted.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Canon Printer reset tool for MP100 MP400 series
Thanks a million for this. I have just managed to get my MP460 Ink levels reset having tried lots of other sites and failed.
Full Ink Tank in Canon Pixma ip4000
It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))
Canon MX922 printer with B200 service code
Try green copy button and red triangle in a circle together while releasing the power button upon restarting printer.
Canon MP600 died
hey guys I found this on the net check it out maybe somebody can make something out of it cuase they omitted this part on the service manual that I attained cause I have the same problem hope this helps.
Canon i560 Will not print black
Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.
Canon Pixma iP3000 "Open door" Error code.
Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.
Canon Pixma MP150 Error Code 5100
Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.
CANON P200- ERROR 5100 PLEASE HELP!
Read this for solutions http://www.mytechtime.com/2011/10/canon-error-5100-how-to-fix.html